• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.10 no.5
• /
• pp.435-441
• /
• 2017

Detecting an inter-harmonic accurately is not easy work, because it has small magnitude, and its frequency which can be observed is not an integer multiple of fundamental frequency. In this paper, a new method using filter bank system and adaptive predictor is proposed. Filter bank system decomposes input signal to sub bands. In adaptive predictor, inter-harmonic is detected with decomposed sub band signal as input, and error signal as output. In this scheme, input-output characteristic of adaptive predictor is notch filter, as predicted harmonic is canceled in error signal, so detecting an inter-harmonic can be possible. Magnitude and frequency of detected inter-harmonic is estimated by recursive algorithm. The performances of proposed method are evaluated to sinusoidal signal model synthesized with harmonics and inter-harmonics. And validity of the method is proved as comparing the inter-harmonic detection results to MUSIC and ESPRIT.

• Journal of the Korea Convergence Society
• /
• v.11 no.11
• /
• pp.257-267
• /
• 2020

In this study, we predicted the employment ratio by the export industry using various machine learning methods and verified whether the prediction performance is improved by applying the constrained forecast combination method to these predicted values. In particular, the constrained forecast combination method is known to improve the prediction accuracy and stability by imposing the sum of predicted values' weights up to one. In addition, this study considered various variables affecting the employment ratio of each industry, and so we adopted recursive feature elimination method that allows efficient use of machine learning methods. As a result, the constrained forecast combination showed more accurate prediction performance than the predicted values of the machine learning methods, and in particular, the stability of the prediction performance of the constrained forecast combination was higher than that of other machine learning methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.87-97
• /
• 2004

In this paper, we propose an algorithm for interlaced-to-progressive conversion by the weighted summation of the information collected from spatial do-interlacing method, in which the weighted edge based line average is applied, and the temporal method in which the motion compensation is employed by using hi-directional BMA (block matching algorithm). We employed time-recursive and motion adaptive processing as motion detection is involved. Also, a median filter is used to deal with limitation of the linear summation in which only an intermediate of values being involved is determined. The main goal of the approach is to overcome the shortcomings of each of the do-interlacing techniques without significant increment of the computational complexity, and the proposed method is apt to implement in hardware for real-time processing.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.1007-1010
• /
• 2005

This paper presents a fingerprint image registration method. In the fingerprint system, the insufficiency of mutual information between a template and a query fingerprint is one of major factors to deteriorate recognition performance. To overcome this problem, we need to register multiple impressions and integrate their information. Our method matches the ridges from multiple impressions recursively and then registers the impressions to minimize the registration error calculated from the Distance map. Our method use regularized TPS model as the transformation model to compensate for the plastic deformation. We compare our method with 3 prior arts (ICP, Distance Map, Ross's method). Our registration error and its' variance is the smallest and also the average registration error is below 3 pixels.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.65-70
• /
• 1984

A recursive parameter estimation method is applied to spindle deflection model during boring process. The spindle infeed rate is then determined to preserve the diametral tolerance of bore. This estimation method is further extended to adaptive control by application of the variance perturbation method. The results of computer simulation attest that the proposed method renders the optimal cutting conditions, maintaining the diametral accuracy of bore, regardless of parameter fluctuations. The proposed method necessitating only post-process measurements features that initialization of parameter guess values in simple, a priori knowledge on parameter variations is not needed and the accurate estimation of optimal spindle infeed rate is obtained, even if the parameter estimation may be poor.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.1
• /
• pp.1-9
• /
• 1991

This paper describes a new method of calculating expected energy generation and loss of load probability (L.O.L.P) for electric power system operation and expansion planning. The method represents an equivalent load duration curve (E.L.D.C) as a mixture of cumulants approximation (M.O.N.A). By regarding a load distribution as many normal distributions-rather than one normal distribution-and representing each of them in terms of Gram-Charlier expansion, we could improve the accuracy of results. We developed an algorithm which automatically determines the number of distribution and demarcation points. In modeling of a supply system, we made subsets of generators according to the number of generator outage: since the calculation of each subset's moment needs to be processed rapidly, we further developed specific recursive formulae. The method is applied to the test systems and the results are compared with those of cumulant, M.O.N.A. and Booth-Baleriaux method. It is verified that the M.O.C.A. method is faster and more accure than any other method.

• IE interfaces
• /
• v.11 no.3
• /
• pp.55-63
• /
• 1998

In this study we consider a CONWIP system in which the processing times at each station follow an exponential distribution and the demands for the finished products arrive according to a compound Poisson process. The demands that are not satisfied instantaneously are assumed to be lost. We assume that the lot size at each station is greater than one. For this system we develop an approximation method to obtain the performance measures such as steady state probabilities of the number of parts at each station, average number of parts at each station and the proportion of lost demands. For the analysis of the proposed CONWIP system, we model the CONWIP system as a closed queueing network with a synchronization station and analyze the closed queueing network using a product form approximation method. A recursive technique is used to solve the subnetwork in the application of the product-form approximation method. To test the accuracy of the approximation method, the results obtained from the approximation method were compared with those obtained by simulation. Comparisons with simulation have shown that the accuracy of the approximate method is acceptable.

• Economic and Environmental Geology
• /
• v.20 no.2
• /
• pp.119-123
• /
• 1987

Hankel transform of order 0 can be represented by a combination of Abel transform and Fourier transform. This Abel-Fourier method can offer computational advantages over a conventional digital linear filter method through the uses of a rapid Abel transform with shift variant recursive filter and of a fast Fourier transform. The Abel-Fourier method, however, is generally less accurate than a well-designed digital linear filter method. In geoelectrical applications, the digital linear filter method seems to be more flexible than the Abel-Fourier method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.6
• /
• pp.1453-1462
• /
• 1996

A numerical simulation is carried out on the directiveity synthesis of ultrasonic transducers by point source array. Directive method with combined LMS(Least-Mean-Square) method is practiced by means of a iterative method to realize the desired directivity. The directiviey of quasi-ideal beam with a beam width and a directive arbitrary specified was chosen. On the numerical resut, Proposed algorithm shows higher speed of clculating simulation than that of LMS method, and make adaptive control, which enables the desired directivity. Numerical simulations are carried out by PC(CPU:80486 DX2, RAM 16Mbyte).

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.629-632
• /
• 1997

This paper presents the design method of controller which is combined Genetic Algorithms with the Generalized minimum variance self tuning controller. It is shown that the controllers adapts to changes in the system parameters with time delays and noises. The self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a polynomial parameters. The computer simulation results are presented to illustrate the procedure and to show the performance of the control system.