• Journal of Korean Society for Atmospheric Environment
• /
• v.24 no.6
• /
• pp.641-648
• /
• 2008

A plate-type dielectric barrier discharge (DBD) reactor was designed and tested for removal of gaseous toluene. The DBD reactor consisted of 9 parallel plate electrodes, four of which were grounded. An AC voltage of rectangular waveform ($5{\sim}8.5kV$, $60{\sim}1,000Hz$), was applied to the other five electrodes. The gaseous toluene passed through the DBD reactor and its concentration was measured by a real-time gas analyzer. The carbon monoxide (CO) and carbon dioxide ($CO_2$) which were produced by decomposition of toluene in the DBD reactor, were sampled and analyzed by a micro gas chromatography. The maximum toluene removal efficiency was 51.4%.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.1-7
• /
• 2011

In this study the optimal stacking section was selected by pendulum impact test for six different stacking sections of the composite safety barrier. The beam cross-section shape was determined through the poll on six different beam cross-section shapes. The six kinds of stacking design for the determined beam cross-section were suggested. CSM, DB, DBT and Roving fibers were used for stacking design. Horizontal beam and 3:1 sloped beam were modeled by using LS-DYNA. The fall impact simulation was carried out by using rectangular pendulum and cylinder pendulum. Optimal stacking section was determined by comparing and analyzing the impact simulation results.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.13 no.3
• /
• pp.27-33
• /
• 2009

A computational study has been performed out to evaluate the effect of a vertical porous barrier on the pressure oscillations in a supersonic cavity. The porous barriers with different perforations were vertically installed into a rectangular cavity at Mach numbers 1.50, 1.83 and 2.50. TVD finite difference MUSCL scheme was employed to solve the two-dimensional, unsteady, compressible Navier-Stokes equations. The present vertical porous barrier considerably altered the characteristics of the time-dependent shear layers that occur at the upstream edge of cavity and remarkably reduced the pressure oscillations inside the supersonic cavity. The present results showed that the effectiveness of passive control using the present porous vertical barrier is dependent on Mach number and the perforation of the porous barrier.

• Progress in Superconductivity
• /
• v.7 no.1
• /
• pp.17-21
• /
• 2005

We report the oscillation of the Josephson vortex-flow resistance in the rectangular stacks of $Bi_{2}Sr_{2}CaCu_{2}O_{8+x}$(Bi-2212) intrinsic Josephson junctions (IJJs). Apiece of Bi-2212 single crystal containing a few tens of IJJs was sandwiched between two gold electrodes and fabricated into a rectangular shape with the typical lateral size of about $1.5{\times}10\;{\mu}m^2$, using e-beam lithography and focused ion-beam etching techniques. In a tesla-range magnetic field applied in parallel with the junction planes, the oscillation of the Josephson vortex flow resistance was observed at temperatures near 60 K. The oscillation results from the interplay between the triangular Josephson vortex lattice and the potential barrier at the boundary of a single crystal. The oscillatory magnetoresistance for different bias currents, external magnetic fields, and the tilt-angles provides useful information on the dynamics of the coupled Josephson-vortex lattice system.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.05a
• /
• pp.521-524
• /
• 2005

To protect a satellite and electronic equipment from the acoustic loads generated by rocket propulsion system, many launch vehicle use acoustic blanket. Most high frequency region of the acoustic loads is reduced by nose fairing skins and acoustic barrier, but low frequency region is not. In order to control low frequency acoustic mode, we designed away resonator panel which was made of composite materials. This paper shows the absorption coefficient measurement result of resonator and SPL(Sound Pressure Level) reduction by using resonators in a rectangular cavity for experiment. Proper arrangement of acoustic resonators at each mode reduce effectively SPL around the satellite through changing boundary condition.

• Conservation Science in Museum
• /
• v.22
• /
• pp.53-68
• /
• 2019

Two lime-soil mixture barrier tombs were excavated from the tomb complex of the Woo Family of the Danyang Wu clan dating to the Joseon dynasty in Godeung-dong, Seongnam-si, Gyeonggi-do. Relevant records offer information for more precisely dating these tombs and identifying their occupants. Tomb No. 4, in which a married couple was interred, has a corbeled square ceiling and inscriptions and paintings on its outer walls. The conservation treatment and an infrared inspection revealed that they were intended to express mourning. Tomb No. 6 has a corbeled rectangular ceiling and a single individual interred within. As the basic structure of the tomb was partially damaged in the process of disassembling it while moving the burial site, it was planned to exhibit the tomb outdoors after the remains and relics are collected. However, as the conservation treatment revealed the presence of funeral fans and pitch, and since the remaining structure clearly demonstrates the features of lime-soil mixture barrier tombs from the Joseon dynasty, the plan was changed following a meeting of an advisory council that decided in favor of presenting the tomb indoors. According to the analysis, the pitch is assumed to be resin of a rather low purity due to the immixture of foreign substances. The two tombs are expected to serve as important materials for related research, such as changes by period in the forms of Joseon-era tombs.

• Journal of the Korean Institute of Gas
• /
• v.18 no.2
• /
• pp.69-72
• /
• 2014

If LNG is leaked from 9% Ni steel inner tank by damage, LNG is retained by outer concrete tank. Then large tensile stress can be caused at cylindrical bottom of outer tank by temperature difference between outer and inner surface of outer tank. Therefore, in order to reduce the tensile stress is caused by temperature difference, corner-protection is installed with insulation and 9% Ni steel as a second barrier. In this paper, using finite element method, structural analysis was performed for rectangular and circular shape of knuckle and based on the results, fatigue life of welds of corner protection was predicted. As a consequence of structural analysis, safety factor of circular knuckle shows 33% bigger than rectangular one shows, and circular knuckle has 25% bigger fatigue life time than rectangle has. These results can be applied to life time assessment and design optimization in the future.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.1
• /
• pp.229-234
• /
• 1999

We analyzed the reliability characteristics in platinum schottky diodes with variations of n-type silicon substrates concentrations and temperature variations of measurements. The parameters of reliability measurement analysis are saturation current. turn-on voltage and ideality factor in the forward bias, the breakdown voltage in the reverse bias with device shapes. The shape of devices are square type and long rectangular type for edge effect. As a result, we analyzed that the forward turn-on voltage, barrier height, dynamic resistance and reverse breakdown voltage were decreased but ideality factor and saturation current were increased by increased concentration in platinum and n-silicon junction parts. In measurement temperature(RT, $50^{\circ}C$, $75^{\circ}C$), the extracted electrical parameter values of reliability characteristics were increased at the higher temperature under the forward and reverse bias. The long rectangular type devices were more decreased than the square type in reverse breakdown voltage by tunneling effects of edge part.

• Proceeding of EDISON Challenge
• /
• 2014.03a
• /
• pp.15-27
• /
• 2014

양자화학 (quantum chemistry)을 처음 접했을 때, 이전까지의 고전역학 (classical mechanics)에 익숙한 대다수의 학생들은 양자화학을 받아들이는 데 어려움을 겪는다. 모형계에 양자역학 (quantum mechanics)을 직접 적용하여 봄으로써 생소한 양자 개념에 대한 이해를 도울 수 있다. 본 논문에서는 양자동역학 (quantum dynamics)을 수치적으로 구현하는 계산 프로그램을 모형계에 적용하여 양자 개념을 설명할 수 있는 몇 가지 예를 보이고자 한다. 1 차원 시간의존 슈뢰딩거 방정식 (1-D time-dependent $Schr{\ddot{o}}dinger$ equation)의 해를 얻어 양자동역학을 구현하였으며, 그에 해당하는 고전동역학은 뉴턴 방정식 (Newton's equation)의 해로 얻어졌다. 조화 진동자 퍼텐셜 (harmonic oscillator potential), 모스 진동자 퍼텐셜 (Morse oscillator potential), 이중 우물 퍼텐셜 (double-well potential), 네모 퍼텐셜 장벽 (rectangular potential barrier), 그리고 에카트 퍼텐셜 (Eckart potential)에 대한 계산을 수행하였다. 두 가지 동역학을 비교하기 위하여 계산 결과의 시각화 (visualization)를 이용하고 동역학 특성의 차이를 비교하는 차별화 (differentiation)를 강조한다. 영점에너지 (zero-point energy), 위상어긋남 (dephasing), 터널링 (tunneling), 그리고 반사 (reflection) 현상과 같은 양자동역학의 특징을 고전동역학과 비교함으로써 직관적인 이해를 도울 수 있었다. 이러한 결과는 양자화학에 입문하는 학생들을 대상으로 쓰일 수 있는 효율적인 강의 모델을 제시할 것으로 기대한다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.1
• /
• pp.9-15
• /
• 2006

For the accurate safety assessment of potential radioactive waste disposal site which is located in the crystalline rock it is important to simulate the mass transportation through engineered and natural barrier system precisely, characterized by porous and fractured media respectively. In this work the methods to construct discrete fracture network for the analysis of flow and mass transport through fractured-porous medium are described. The probability density function is adopted in generating fracture properties for the realistic representation of real fractured rock. In order to investigate the intersection between a porous and a fractured medium described by a 2 dimensional rectangular and a cuboid grid respectively, an additional imaginary fracture is adopted at the face of a porous medium intersected by a fracture. In order to construct large scale flow paths an effective method to find interconnected fractures and algorithms of swift detecting connectivities between fractures or porous medium and fractures are proposed. These methods are expected to contribute to the development of numerical program for the simulation of radioactive nuclide transport through fractured-porous medium from radioactive waste disposal site.