• 임상간호연구
• /
• 제18권1호
• /
• pp.52-62
• /
• 2012

Purpose: This study was done to evaluate the effects of Doin Gigong Exercise on the Recovery from Facial Paralysis, pain and anxiety in patients with Bell's palsy. Methods: A nonequivalent control group posttest-only non-synchronized design was used for this study. Participants were contacted at the oriental medicine ward of D hospital in Busan and assigned to either the experimental group (25) or control group (25). Collected data were analyzed for changes in recovery from facial paralysis, in pain and in anxiety between pre and post Doin Gigong Exercise. Data analysis was done using t-test, Fisher's exact test, $x^2-test$ with the SPSS 12.0 Win program. Results: There were significant decreases in the lip paralysis status pain and in anxiety between pre and post Doin Gigong Exercise. Conclusion: The results indicate that Doin Gigong Exercise is effective for patients with Bell's palsy to decrease lip paralysis, pain and anxiety and therefore, an effective intervention for use with patients with Bell's palsy.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2003년도 봄 학술발표회 논문집
• /
• pp.288-295
• /
• 2003

An adaptive procedure in finite element analysis is presented by p-refinement of meshes in conjunction with a posteriori error estimator that is based on the recovery technique. In case of the recovery technique, the SPR(superconvergent patch recovery) approach has been modified for p-adaptive mesh refinement. The strategy of finding a nearly optimal distribution of polynomial degrees on a fixed finite element mesh is discussed such that a particular element has to be refined automatically to obtain an acceptable level of accuracy by increasing p-levels non-uniformly. To verify the proposed algorithm, the limit value approach is proposed which utilizes the exact strain energy computed from the extrapolation equation. A new pre-processor is developed for the p-version finite element program in which the vector graphic editor is used for the automatic generation of node connection and coordinate by halfedge solid data structure according to uniform or nonuniform p-distribution. The general 2-D algorithm is also developed to generate face modes and internal modes in accordance with different mesh types. The quality of the error estimator is investigated with the help of two mumerical examples. The results show that the sequences of p-distributions obtained by the proposed error indicator closely follow the optimal trajectory.

• 대한기계학회논문집B
• /
• 제21권8호
• /
• pp.996-1008
• /
• 1997

This paper describes a methodology and results for the analysis of a small steam injected gas turbine cogeneration system. A performance analysis program for the gas turbine engine is utilized with modifications required for the model of steam injection and the heat recovery steam generator (HRSG). The object of simulation is a simple cycle gas turbine engine under development which adopts a centrifugal compressor. The analysis is based on the off-design operation of the gas turbine and the compressor performance map is utilized. Analyses are carried out with the injection ratio as the main parameter. The effect of steam injection on the power and efficiency of gas turbine and cogeneration capacity is investigated. Also presented is the variation in the main operating parameters inside the HRSG. Remarkable reduction in NOx generation by steam injection is confirmed. In addition, it is observed that for the 100% power operation the temperature of the cooled first nozzle blade decreases by 100.deg. C at full steam injection, which seems to have a favorable effect on the engine life time.

• 한국화재소방학회논문지
• /
• 제15권2호
• /
• pp.20-30
• /
• 2001

The science and technology of seismic hazard mitigation are increasingly being shared among scientists and policy makers around the world. Administrative expertise is also being shared. While there is still tremendous unevenness in technical and administrative capacities and resources, a global community of emergency managers is developing and there is a globalization of expertise. Hazards are better understood, tools for risk assessment are improving, techniques for hazard mitigation are being perfected, and communities and states are implementing more comprehensive disaster preparedness, response, and recovery programs. Priorities are also emerging and hazard mitigation has emerged as the priority of choice in North America and Europe. An increasingly important component of hazard mitigation is resilience, in terms of increased capacities for disaster mitigation and recovery at the community and even individual levels. Each year, more is known about the locations and natures of seismic hazards, although there are still unknown and poorly understood fault lines and limited understanding of related disasters such as tsunamis and landslides. More is known about the impact of earthquakes on the built environment, although nature still provides surprises to confound man's best extorts to reduce risk. More is known about human nature and how people respond to uncertain risk and when confronted by certain catastrophe. However, despite the increased understanding of seismic phenomena and how to protect people and property, there is much that needs to be done to reduce the risk, particularly in major metropolitan areas.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.452-455
• /
• 2005

This paper proposes a new sustaining driver for AC PDP(Plasma Display Panel), which improves the performance of conventional circuit with reduced sustain voltage such as TERES(TEchnology of REciprocal Sustainer). In the TERES circuit, the sustain voltage is the half of general sustaining driver and there is no energy recovery circuit. The circuit proposed in his paper has an energy recovery circuit and removes surge currents. Although the energy recovery circuit is added, the number of active switching elements is the same as the TERES circuit. The operations of the proposed circuit are analyzed for each mode and its validity is verified by the simulations using PSpice program.

• International Journal of Air-Conditioning and Refrigeration
• /
• 제9권4호
• /
• pp.17-26
• /
• 2001

Simulation was conducted using TRNSYS to evaluate the thermal performance of a facility. This facility has a condensing-type heat exchanger which is able to recover the latent energy for the purpose of reducing the heating energy in winter. The boiler and chiller are selected based on the annual peak loads and controlled to maintain the facility at the set temperature of 14~$17^\circ{C}$. Supplied energy by the boiler and recovered energy by the heat exchanger were calculated as a function of number of pass through heat exchanger, kind of fuel and hot water velocity. Simulation results show that about 20% of the total heating load can be recovered by the heat exchanger and the amount of latent heat is increasing with the number of pass. This means that the efficiency of the waste energy recovery system can be increased by using a condensing-type heat exchanger rather than a traditional sensible heat exchanger.

• 한국전문물리치료학회지
• /
• 제4권2호
• /
• pp.77-88
• /
• 1997

Conversion disorder is a psychologically produced alteration or loss of physical functioning suggestive of a physical disorder. Conversion symptoms are often superimposed on organic disease and can be overlooked. Psychological techniques are central to the management include the following: avoiding confrontation with the patients; avoiding reinforcement or trivializing the symptoms; reviewing results of tests and exams and creating an expectation of recovery; educating the patient before a treatment is begun; evaluating the patient's emotional adjustment and considering it at a treatment; using caution in labeling the condition; considering referral for psychotherapy; establishing particularly a treatment plan and making a definite treatment program; adjusting patient' s environment; letting participate a family at appropriate time; developing a reinforcement program for a treatment of chronic symptoms; developing a home program for outpatients. Use behavior therapy reinforcement may be helpful with more chronic or resistant symptoms, especially when there is a history of vague or excessive somatic complaints or significant secondary gain.

• 대한관절경학회지
• /
• 제1권1호
• /
• pp.86-90
• /
• 1997

Good stability and complete range of motion should be the ultimate goal of a rehabilitation program after ACL reconstruction. In previous years. the rehabilitation of the ACL reconstructed knee focused on protecting the new ligament by blocking terminal knee extension, hut, despite good stability, this approach led to numerous postoperative complications. Nowadays, most of surgeons agree the accelerated rehabilitation program based on the concept of ligamentization and clinical experience. Accelerated rehabilitation program consists of maintain of full extension of the knee, early weight bearing and prompt recovery of ROM, and closed kinetic chain exercise. Meeting this goal requires effective communication between-members of the health care team-the physician, physical therapist, atheletic trainer, and the patient. We have to know the importance of rehabilitation, knowlege about the physical therapy, and to introduce for special physical therapist and equipment.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.357-362
• /
• 2000

Allowable stress design(ASD) method has been widely used to design steel structures such as boiler and heat recovery steam generator(HRSG) of power plant. However, many researchers are recently intrested in road and resistance factor design(LRFD) method which may take the place of ASD. In this work, the weight calculation of steel structure was compared when ASD and LRFD were applied respectively. For the calculation of weight of steel structure, computer program was developed and applied to obtain beam weight. Using this program and GTSTRUDL, structural design program, weight of steel structure is calculated. As a result of weight calculation, maximum 5.4% of weight reduction is achieved among examples of this study by applying LRFD comparing with the result of ASD, and those results quite dependent on the applied load and member classification.

• 한국안전학회지
• /
• 제26권5호
• /
• pp.54-58
• /
• 2011

Emergency preparedness plan(EPP) is the systematic management of activities that involve a material degree of risk of loss or other damage to the surroundings(people, property and environment), and the boundary of accident recovery plan(ARP). The main purpose of the program is to provide a safety management system to each facility in order to enable to prevent accident and to control accident immediately. The EPP includes not only typical safety-related documentations such as material safety data sheet(MSDS), standard operation procedure(SOP), emergency response plan(ERP). EPP is established basis of the preliminary safety analysis involving risk identification, assessment and prevention plans. The program is also helpful for government or related agencies to control a number of accidents in small-scale companies in the whole country.