• Membrane Journal
• /
• v.17 no.4
• /
• pp.381-386
• /
• 2007

Hollow fibers were made using the nickel slurry containing nickel particles and polymers by phase inversion method. And then, metallic filters were fabricated by sintering method at $1,150^{\circ}C$ under reduction condition. Metallic microfiltration membranes were prepared by coating nickel particles on the metallic filter. The properties of the metallic hollow fiber filters and microfiltration membranes such as pore size and strength were investigated. The metallic membrane showed good resistance against acid, base and chlorine. It was observed that the membrane exhibited good recovery rate by back washing.

• Journal of Environmental Health Sciences
• /
• v.21 no.1
• /
• pp.47-55
• /
• 1995

Minari(Oenanthe stolonifera DC.) lived in serious polluted water is able to remove chemical elements from batch system. This study attempted to compare the incorporation of cadmium and lead in batch system. Different concentrations of Cd(0.02 0.1 0.5 1.00 5.00 mg/l) and Pb(0.1 0.5 1.0 5.0 10.0 mg/l) were used. Toxic effects were obvious at Cd 1.00 mg/l and Pb 5.00 mg/l. The detrimental effects on minari were chlorosis of leaves and stunted roots and reduction in the number of lateral roots. There was reduction in growth rates exposed above Cd 1.00 mg/l and lead 5.0 mg/l. The minari capacities to remove Cd were 34.1-74.2% and Pb were 53.0~91.5%. The removal rates by minari in Cd and Pb solution were decreased with increased exposure concentration(in Cd r=0.97, in Pb r=0.88). The removal rates by minari in Cd and Pb solution were increased with increased growth rate(in Cd r=0.93 in Pb r=0.92). Recovery rates on minari are 67.3~95.2% in Cd water and 72.6~88.3% in Pb water. The rates are increased with increased growth rates and decreased initial concentrations.

• The Korean Journal of Food And Nutrition
• /
• v.10 no.3
• /
• pp.325-329
• /
• 1997

A inulinase of garlic(Seosan) was partially purified by ammonium sulfate fractionation and Sephadex G-150 gel filtration chromatography with a recovery of 9.1%. Optimum temperature and pH of the enzyme were 4$0^{\circ}C$ and pH 6.0, respectively, and the enzyme was stable below 7$0^{\circ}C$ and in the pH range of 5.0~8.0. The enzyme was strongly inhibited by metal ions(Al3+, Mn2+, Hg2+, Cd2+) and EDTA, and the Km value for inulin was 0.22%.

• Resources Recycling
• /
• v.13 no.2
• /
• pp.33-38
• /
• 2004

Concepts and experimental results for the unique utilization process which we could obtain the high purity calcium nitrate from blast furnace slag in the steel industry are described. Firstly we reacted the blast slag with nitric acid and separatively removed the insoluble silica by filtration. We adjust the pH of filtrate to 6∼8 with calcined lime, and then precipiated out the metal components like Fe, Al, Mg in the forms of hydroxides. Consequently concentration of the mother liquor and crystallization processes make us obtain the high purity (>98 wt%) calcium nitrate tetrahydrates, which is expected the valuable fertilizers.

• Journal of Soil and Groundwater Environment
• /
• v.11 no.3
• /
• pp.1-11
• /
• 2006

Attempts were made to analyze the national policy of soil contamination prevention and management of inactive or abandoned metal (IAM) mines in Korea. This approach focused on legal systems and legislation, remediation technology development, and the arrangement or distribution of budgets pertaining to national policy since the mid 1990's. Prevention of Mining Damage and Recovery Act enacted. Defines the roles, responsibility and budget of the government when recovering mine damages. However, in 2005 there still remains to improve the national policy of soil contamination prevention and management of IAM mines. Analysis of national and industrialized foreign countries including the United States, the United Kingdom, and the Netherlands suggest the following improvements: i) arranging distinct regulations between strict and non-strict liability criteria for potentially responsible parties; limiting innocent and non-strict liability depending on the period of incurred mining activity, ii) enhancing participation of local communities by enforcing law and legislation, iii) establishing a national database system of (potentially) IAM contaminated sites based on the Website-Geographic Information System, iv) carrying out site-specific risk assessments and remediation of IAM contaminated sites, v) preparation and distribution of clean-up fund at mine sites adequately, and vi) technology development for the cleaning of IAM contaminated sites; awarding positive incentives of a legal nature for participants applying newly developed technology in IAM mines.

• Journal of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.358-370
• /
• 1988

Several new ion exchange resins have been synthesized from chloromethyl styrene-1,4-divinylbenzene(DVB) with 1%, 2%, 4%, and 10%-crosslinking and macrocyclic ligands of cryptand type by interpolymerization method. The adsorption characteristics and the pH, time, solvents and concentration dependence of the adsorption of metal ions by this resin were studied. The correlation between the separation characteristics of uranium, rare earths and transition metal on the resins and the stability constants of complexes with macrocyclic ligands have been examined. The resins were very stable in both acidic and basic media and have good resistance to heat at $280^{\circ}C$. The $UO_2^{+2}$ aqueous solution are not adsorbed on the resins below pH 3.0, but the power of adsorption of $UO_2^{2+}$ increased rapidly above pH 4.0. The optimum equilibrium time for adsorption of metallic ions was twenty minutes and adsorptive power decreased in proportion to crosslinking size of the resins and order of dielectric constants of solvents used and the selective sequence for metal cations is in the order of $UO_2^{2+},\;Cu^{2+}\;and\;Nd^{3+}$.

• Journal of Food Hygiene and Safety
• /
• v.36 no.4
• /
• pp.281-288
• /
• 2021

This study was conducted to analyze and compare the concentrations of heavy metals in 430 different products of 20 types of herbal medicines available in the domestic market in Korea by Graphite Furnace-Atomic Absorption Spectrometry (GF-AAS) and automated mercury analyzer. The accuracy for lead (Pb), arsenic (As), cadmium (Cd), and mercury (Hg) was in the range 92.67-102.56%, and the precision was 0.21-6.00 relative standard deviation (RSD%), which was in compliance with the Codex acceptable range. Furthermore, the Food Analysis Performance Assessment Scheme (FAPAS) quality control (QC) material showed a recovery range of 96.7-102.0% and 0.33-4.93 RSD%. The average contents (㎍/kg) of Pb, As, Cd, and Hg in herbal medicines were 254.9 (not detected (N.D.)-2,515.2), 171.0 (N.D.-2,465.2), 99.2 (N.D.-797.1), and 6.0 (N.D.-83.6), respectively. Based on the quantitative analysis results, the heavy metal contents of 20 types of herbal medicines distributed in Korea are within the acceptable range according to the standards issued by the Ministry of Food and Drug Safety (MFDS). By using the manufacturer of herbal products as the standard for QC, the Pb, As, Cd, and Hg contents were investigated in the packaging process just before distribution to determine the actual conditions of residual heavy metals in herbal medicines. Thus, these result may contribute to monitoring the QC of herbal medicines distributed in Korea and could provide basic data for supplying safe herbal medicines to the public.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.4
• /
• pp.513-519
• /
• 2021

Metallic suture anchors are very useful and common fixation devices that are inserted into the target bone to sustain the tendon of a patient with musculus supraspinatus tendon ruptures. On the other hand, the presence of a metallic material prosthesis, such as a metal suture anchor, causes severe MR imaging artifacts, including field distortion, signal loss, and failure of fat suppression. The difference in magnetic susceptibility between metal and other organic materials causes magnetic field distortion surrounding the prosthesis. The resulting magnetic field inhomogeneity makes the images with a lower signal-to-noise ratio and distortion. For a patient with a suture anchor implanted, MR imaging is the golden standard for determining the postoperative prognosis, and a fat-saturation sequence is one of the imaging methods most affected by metal-induced artifacts. In this study, three fat-saturation sequences were compared. Artifact quantification and contrast comparison between the supraspinatus tendon and the surrounding muscle were presented. The images obtained using the STIR pulse sequence showed fewer susceptibility artifacts and better visibility in the supraspinatus tendon and the tissue area. Therefore, the STIR sequence is the most appropriate fat-saturation imaging method for patients with a metallic prosthesis.

• Journal of the Korean Wood Science and Technology
• /
• v.35 no.1
• /
• pp.73-80
• /
• 2007

This study was carried out to separate the heavy toxic metals in eco-building materials by low-temperature pyrolysis, especially arsenic (As) compounds in CCA wood preservative as a solid in char. The pyrolysis was carried out to heat the CCA-treated Hemlock at $280^{\circ}C$, $300^{\circ}C$, $320^{\circ}C$, and $340^{\circ}C$ for 60 mins. Laboratory scale pyrolyzer composed of [preheater$\rightarrow$pyrolyzer$\rightarrow$1st water scrubber$\rightarrow$2nd bubbling flask with 1% $HNO_3$ solution$\rightarrow$vent], and was operated to absorb the volatile metal compound particulates at the primary water scrubber and the secondary nitric acid bubbling flask with cooling condenser of $4^{\circ}C$ under nitrogen stream of 20 mL/min flow rate. And the contents of copper, chromium and arsenic compounds in its pyrolysis such as carbonized CCA treated wood, 1st washing and 2nd washing liquors as well as its raw materials, were determined using ICP-AES. The results are as follows : 1. The yield of char in low-temperature pyrolysis reached about 50 percentage similar to the result of common pyrolytic process. 2. The higher the pyrolytic temperature was, the more the volatiles of CCA, and in particular, the arsenic compounds were to be further more volatile above $320^{\circ}C$, even though the more repetitive and sequential monitorings were necessary. 3. More than 85 percentage of CCA in CCA-treated wood was left in char in such low-temperature pyrolytic condition at $300^{\circ}C$. 4. Washing system for absorption of volatile CCA in this experiment required much more contacting time between volatile gases and water to prevent the loss of CCA compounds, especially the loss of arsenic compound. 5. Therefore, more complete recovery of CCA components in CCA-treated wood required the lower temperature than $320^{\circ}C$, and the longer contacting time of volatile gases and water needed the special washing and recovery system to separate the toxic and volatile arsenic compounds in vent gases.

• Environmental Engineering Research
• /
• v.25 no.1
• /
• pp.88-95
• /
• 2020

An investigation of rare metals recovery from LiNi_xCo_yMn_zO₂ cathode material of the end-of-life lithium-ion batteries is presented. To determine the influence of reductant on the leach process, the cathode material (containing Li 7.6%, Co 20.4%, Mn 19.4%, and Ni 19.3%) was leached in H₂SO₄ solutions either with or without H₂O₂. The optimal process parameters with respect to acid concentration, addition dosage of H₂O₂, temperature, and the leaching time were found to be 2.0 M H₂SO₄, 4 vol.% H₂O₂, 70℃, and 150 min, respectively. The yield of metal values in the leach liquor was > 99%. The leach liquor was subsequently treated by precipitation techniques to recover nickel as Ni(C₄H₇N₂O₂)₂ and lithium as Li₂CO₃ with stoichiometric ratios of 2:1 and 1.2:1 of dimethylglyoxime:Ni and Na₂CO₃:Li, respectively. Cobalt was recovered by solvent extraction following a 3-stage process using Na-Cyanex 272 at pH_eq ~5.0 with an organic-to-aqueous phase ratio (O/A) of 2/3. The loaded organic phase was stripped with 2.0 M H₂SO₄ at an O/A ratio of 8/1 to yield a solution of 114 g/L CoSO₄; finally recovered CoSO₄.xH₂O by crystallization. The process economics were analyzed and found to be viable with a margin of $476 per ton of the cathode material.