• 전기학회논문지P
• /
• 제65권3호
• /
• pp.178-182
• /
• 2016

FIDVR(Fault Induced Delayed Voltage Recovery) is a phenomenon that recovery of the system voltage level delays after the fault. Cause of FIDVR phenomenon is motor load characteristic about voltage and reactive power. In low voltage condition, the motor go to stall state that consume large amount of reactive power. As a result, the voltage recovery problem is that of repeated occurrences of sustained low voltage following faults on the system. In this paper, analysis the characteristics of the motor load. And using the korean power system actual data, perform a case studies to voltage delay recovery phenomenon alleviation method. Change of each parameters by analyzing the effect on system and selecting an influence parameter. In addition, dynamic characteristic analysis of the resulting difference in the proportion by the motor load in power systems, considering the effect on the voltage stability.

• 조명전기설비학회논문지
• /
• 제29권8호
• /
• pp.49-54
• /
• 2015

Molded Circucit Breaker(MCCB) is a most widely used device to protect loads from the over-current in low power level distribution system. When the MCCB interrupts the over-current, the arc discharge occurred between fixed contact and moving contact to create hot gas. By the Lorentz force due to arc current, the occurred arc is bent to the grids. The grids extend and cool and divide it for arc extinguish. In the majority cases, the MCCB protects loads by interrupting the over-current successfully but in some cases the re-ignition is occurred by hot-gas created during process of interruption. The re-ignition arises when the recovery voltage(RV) is more higher than the recovery strength between contacts and it leads to interruption fault. Therefore to find out the dielectric recovery characteristics of protecting device has a great importance for preventing interruption fault. In this paper, we studies measurement method of the dielectric recovery characteristics considering inherent attribute of the MCCB. To measure the dielectric recovery characteristic of MCCB, we makes an experiment circuit for applying the over-current and the randomly recovery voltage. The measurement methode to find out the dielectric recovery voltage of the MCCB was established and the result was based on experiment results.

• 전기학회논문지
• /
• 제58권5호
• /
• pp.905-910
• /
• 2009

For proper application and operation of a SFCL(Superconducting Fault Current Limiter) in distribution systems, the prior investigation of fundamental characteristics and its effects analysis to the systems are very important. A point of view in coordination with recloser in distribution systems, characteristic about quenching and recovering of SFCL should be studied. Especially, its detailed study of recovery characteristic is particularly important to avoid conflict between the SFCL and the recloser. In this paper, the resistive type SFCL and recloser, which used in distribution system, were implemented using EMTP/ATPDraw and MODELS language. To analyze the recovery characteristics of SFCL according to recloser operation in distribution systems, case studies have been simulated and investigated.

• 한국자동차공학회논문집
• /
• 제21권4호
• /
• pp.153-158
• /
• 2013

The purpose of this study is to investigate the performance characteristics of the counterflow exhaust heat recovery device for the applied gasoline engines. The EHRS device is installed behind the catalyst. This study investigates the engine warm-up characteristic, the exhaust noise characteristic, the back-pressure characteristic. The engine warm-up characteristics is (load 0%, load 10%, load 20%) in (idle, 1000rpm, 1500rpm, 2000rpm, 2500rpm) conditions by measuring the time it warmed up, coolant temperature ($25^{\circ}C{\sim}80^{\circ}C$) until the performance evaluation is performed. The wide open throttle and the coast down the exhaust noise and the back-pressure characteristic experiment repeated twice. The test conditions is 950rpm~6,050rpm proceed experiment repeated 3-5 times. Load 0% idle conditions except the results improved engine warm-up characteristics. The exhaust noise obtain similar results the BASE+EHRS W/O_FRT_MUFF with BASE and back-pressure to obtain similar results BASE+EHRS W/O_FRT_ MUFF with BASE+EHRS.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.188-189
• /
• 2006

The flux-lock type superconducting fault current limiter (SFCL) has the attractive characteristics that can adjust the current limiting level by the turns ratio and the winding direction of two coils. To apply this type SFCL into power system, the analysis for the recovery characteristics of it together with the current limiting characteristic is needed. In this paper, the experiments of the current limiting and the recovery characteristics of the flux-lock type SFCL with YBCO thin film were performed. The recovery characteristics of the flux-lock type SFCL dependent on the winding direction of two coils were analyzed through the comparison with the resistive type SFCL.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 광주전남지부
• /
• pp.101-102
• /
• 2006

We investigated the characteristics of flux-lock type superconducting fault current limiter (SFCL) by the fault cycles. Since the recovery characteristics of a superconducting element in the flux-lock type SFCL were dependent on the winding' direction between two coils, the analysis for the recovery characteristics of this type SFCL together with the current limiting characteristic is necessary to apply it to power system. As the fault cycles was increased from 1 cycle to 5 cycles, the initial limiting current ($I_{ini}$) and quench characteristic were mostly same. As the fault period increases, the recovery time of the superconducting element increases. The consumed energy and recovery characteristics in a superconducting element show the same tendency.

• 한국게임학회 논문지
• /
• 제15권1호
• /
• pp.171-184
• /
• 2015

기존 게임 관련 연구를 살펴보면 게임의 수용, 사용자 만족, 지속사용 의도, 구전 의도와 같은 연구는 수없이 많이 진행되어 왔으나 서비스 회복의 개념을 게임 연구에 적용시킨 사례는 전무한 상태이다. 본 연구는 국내 주요 모바일 소셜 네트워크 게임 플랫폼인 카카오톡 게임을 중심으로 모바일 소셜 네트워크 게임 특성이 서비스 회복에 미치는 영향을 알아보고자 한다. 또한 공정성 이론과 혁신 확산 이론을 바탕으로 모바일 소셜 네트워크 게임 특성 요인을 분석하고 해당 요인들과 서비스 회복과의 인과관계를 규명하였다. 그 결과 적합성을 제외한 모든 모바일 소셜 네트워크 게임 특성이 서비스 회복에 직 간접적인 영향을 미친다는 사실을 밝혀냈다. 이러한 연구결과는 향후 게임 산업의 새로운 비즈니스 모델을 제시하고 위험 요소를 줄여주며 게임 관련 연구의 발전에 기여할 수 있는 참고자료로 활용될 것이라고 기대하고 있다.

• 핵의학기술
• /
• 제18권1호
• /
• pp.158-162
• /
• 2014

공인된 기구에 의해 발급된 문서를 동반하는 인증표준물질은 특성값과 추정값의 신뢰정도를 나타내는 연계 불확도, 그리고 측정한 결과가 명시된 불확정 정도의 범위 내에서 국가 측정 또는 국제측정표준에 일치되도록 연속적으로 비교하고 교정하는 소급성을 제공하는 표준물질이다. 회수율 검사는 검체를 측정하여 얻은 값이 참값에서 얼마만큼 벗어났는지의 차이를 말하며 키트의 정확도를 반영한다. 이러한 인증표준물질을 가지고 회수율 검사를 하는 것은 체외 방사면역진단키트의 정확성을 보여주며 이러한 평가는 매우 중요하다. 인증표준물질은 NIBSC (National Institute for biological standard and control, United Kingdom)와 IRMM (Institute for Reference Materials and Measurements, Belgium)에서 구입하였고 검사 종목은 T4, Ferritin, PSA, Prolactin, AFP 그리고 TSH으로 총 6종목이다. T4는 IRMM의 표준물질을 사용하였고 나머지 종목은 NIBSC의 표준물질을 사용하였다. C-1 (저농도), C-2 (중농도), C-3 (고농도) 3 level로 제조하여 본원에서 사용하는 키트를 이용하여 4회 측정하였다. WHO 인증표준물질을 이용한 회수율 측정에서 T4 90%, Ferritin 88%, PSA 94%, Prolactin 99%, AFP 94%, TSH 93%였다. 6개 종목의 회수율 측정에서 88-99%로 양호한 결과를 보였다. 핵의학 체외진단키트의 정확성을 높이기 위해서 이 연구가 다른 검사실의 키트로 확장되어 검사가 되어야 하고 검사실간에도 교류가 필요하다. 인증표준물질을 이용한 체외진단키트의 회수율 평가가 앞으로도 지속되어야 하며 결과의 정확성은 환자의 만족의 증가로 이어질 것으로 기대한다.

• 대한전자공학회논문지TC
• /
• 제37권10호
• /
• pp.18-25
• /
• 2000

본 논문에서는 ATM망에서의 UBR 서비스를 이용한 네트워크 구성에서의 TCP 혼잡 제어 알고리즘에 따른 성능 분석을 하였다. TCP 혼잡 제어 알고리즘에는 Slow Start, Congestion Avoidance, Fast Recovery, Fast Retransmit등으로 이루어져 있다. TCP Reno, TCP Vanilla을 사용하여 ATM-UBR 서비스 망을 구축하여 성능을 비교 분석하였다. 그러나 Fast Retransmit, Recovery 알고리즘의 특성에 의하여 다중 패킷 손실이 발생할 때의 ATM-UBR 네트워크에서도 성능 저하 현상이 현저하게 발생하였다. 이러한 현상에 대한 해결책으로 본 논문은 새로운 Fast Retransmit, Recovery 알고리즘을 제시하여 성능을 개선하였다.

• 동의생리병리학회지
• /
• 제29권5호
• /
• pp.370-377
• /
• 2015

There is a growing interest in halitosis and diverse Korean medical studies are being conducted about it. But there are few study about teatment effect of halitosis after Korean medical care, treatment duration, and factor affecting recovery rate. Thus, the purpose of this study is to research clinical characteristic of halitosis patients, factor affecting halitosis, recovery rate of halitosis, treatment duration, factor affecting recovery rate by analyzing halitosis patients retrospectively. People who were over 19 and visited Korean medical clinic in Seoul to want to be treated halitosis in 2014 were analyzed retrospectively. We analyzed general and living characteristics of halitosis patients, halitosis-related symptoms and diseases, level of halitosis and halitosis-related symptoms both before and after treatment, treatment duration of halitosis patients, prescription of halitosis patients, recovery rate of level of halitosis and halitosis-related symptoms by general characteristic and duration of symptoms. Female, thirties, and Nonsmoker had the highest proportion in general characteristic. The average duration of halitosis is 41.6months and treatment duration is 2.55months. The average of sensory evaluation score is 3.40±2.53, subjective evaluation score is 5.02±1.53, lump sensation on throat is 3.52±2.50, postnasal drip is 1.11±1.88, dry mouth is 4.13±2.17, quality of life is 6.07±1.13. Gamichiuitang is used the most among prescriptions. Sensory evaluation, subjective evaluation, lump sensation on throat, postnasal drip, dry mouth, and quality of life had better score compared with pre-treatment. Duration of symptoms is in weak inverse proportion to sensory evaluation, subjective evaluation, dry mouth, quality of life. This study is meaningful in the way to find recovery rate of halitosis after korean medical care, treatment duration, and factor affecting recovery rate not progressed until now. But this study also has limits such as not analyzing objective data using halitosis measuring instrument and lack of methodical scale about quality of life. Therefore, succeeding study such as clinical trials is needed to verify reliability of Korean medical treatment.