• 한국농공학회지
• /
• 제45권5호
• /
• pp.110-116
• /
• 2003

A catchment modelling system is the summation of the numerous hydrologic, hydraulic and other process models necessary to simulate the response of a catchment to a storm event. Differences between the recorded catchment response and that predicted by a catchment modelling system can arise from structural errors within the catchment modelling system, evaluation errors in the control parameters, or measurement errors in the recorded data being used to assess the reliability of the evaluation of the control parameters. Presented herein is an investigation of the potential measurement errors within the recorded information, which was considered to occur from instrument error in the ultra sonic flow monitor. This investigation was undertaken using three available rating curves at the Musgrave Avenue Stormwater System in Centennial Park, Sydney, developed by Abustan (1997), Water Board (1994), and using Manning's equation.

• 천문학회보
• /
• 제42권2호
• /
• pp.47.4-48
• /
• 2017

In the middle of $19^{th}$ century, the Seong Gyeong 星鏡, which is a Korean historical astronomy book, was published by Nam Byeong-Gil(1820-1869). In this study, identification was conducted by considering the star catalogue recorded in the Yixiang Kaocheng Xubian 儀象考成續編. The Seong Gyeong 星鏡 recorded the information of 1,449 stars, and identified 1,413 stars among 1,449 stars, which is a rate of 97.5%. The positional error (angular distance) of the identified stars is $5.33{\pm}0.34$ arc-min. It was also confirmed that the magnitudes of the recorded stars have correlations with those of modern times. It was determined that the position error of the stars became larger as the magnitude of the stars became dimmer, or as the position of the stars came closer to the pole. Based on these analyses, the Seong Gyeong 星鏡 was confirmed that it is a result of correcting the precession of the selected stars from star catalogue of Yixiang Kaocheng Xubian 儀象考成續編.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.604-608
• /
• 2004

In this paper, an efficient method is proposed to analyze the radial error of a miniaturized-high speed spindle system. Initially, a device is constructed for measuring the radial error motion using capacitance sensors. The capacitance sensors are placed perpendicular to the axis of the shaft and at 90o to each other. The spindle is rotated at high speed and the profile of the spindle is recorded. An algorithm is developed for analyzing the spindle data and determining the radial error of spindle. The present algorithm uses homogeneous transform matrix (HTM) method and iterative process for determining the radial error. The analysis procedure is performed for different speeds of the spindle. The data obtained from the present system and the results of evaluation are also presented in this paper. It is observed that this method is effective in determining and analyzing the spindle errors for high speed miniaturized spindle.

• Journal of the Optical Society of Korea
• /
• 제15권3호
• /
• pp.244-251
• /
• 2011

We propose a new 2-step phase-shifting digital holographic optical encryption technique and analyze tolerance error for this cipher system. 2-step phase-shifting digital holograms are acquired by moving the PZT mirror with phase step of 0 or ${\pi}$/2 in the reference beam path of the Mach-Zehnder type interferometer. Digital hologram with the encrypted information is Fourier transform hologram and is recorded on CCD camera with 256 gray-level quantized intensities. The decryption performance of binary bit data and image data is analyzed by considering error factors. One of the most important errors is quantization error in detecting the digital hologram intensity on CCD. The more the number of quantization error pixels and the variation of gray-level increase, the more the number of error bits increases for decryption. Computer experiments show the results to be carried out encryption and decryption with the proposed method and the graph to analyze the tolerance of the quantization error in the system.

• 오토저널
• /
• 제10권3호
• /
• pp.31-37
• /
• 1988

A phase different method to evaluate the instrument error of roundness measuring instrument and the form error of specimens for the calibration of the instrument is used. An instrument with a rotary table supported by an air bearing was calibrated by using the standard balls as a standard. The calibration was carried out repeatedly by setting the same ball in 12 phase angles(per 30.deg.) on the table and by recording their roundness errors with a magnification of 100,000 times. As a result of data analysis of all the observations, readout at each of 144 orientations(per 2.5.deg.) from recorded data file, the error of performance of the instrument and the specimens are separated. In the particular instrument used in the present experiment, the error of the instrument was determined with the accuracy of 0.0164 (.mu.m) and the form error of the specimens was determined with the accuracy of 0.0264,0.0172(.mu.m), respectively. If the instrument was calibrated by using the above specimens, then the accuracy of the measurement of roundness error can be improved to about 0.017 (.mu.m).

• 한국환경과학회지
• /
• 제11권10호
• /
• pp.1055-1060
• /
• 2002

A new method of automatic recording raingauge is developed to measure rainfall 1200mm full scale with high accuracy and resolution. The principle of new instrument is to detect a weight change of a buoyant weight according to a change in water level of raingauge measured by the use of a strain gauge load cell. This method has the advantage of increasing measurement accuracy, since no moving equipment is used. Laboratory test of the instrument was recorded 0.4% error of 190mm rainfall amount. The validity of new instrument was examined by comparing its measured values with values recorded by automatic weather station on June 24 to 25 2001 at Daegu Meteorological Station, when there is 148.3mm rainfall amount. In spite of much rainfall there is only 0.77mm difference of total rainfall amount. This instrument was accomplished high accuracy and resolution at field test in much rainy day.

• 한국수학교육학회지시리즈C:초등수학교육
• /
• 제22권4호
• /
• pp.281-294
• /
• 2019

본 연구의 목적은 초등학교 3학년 2학기의 곱셈 학습에서 반성적 활동을 적용함으로써 학업성취도의 수학 학습과정 중에 나타나는 오류 및 처치 행동을 분석하는 데 있다. 연구참여하는 학생들에게 곱셈단원에 대하여 반성적 활동을 적용하여 수업을 재구성하여 진행하였다. 이들의 수학 학업성취도의 변화를 알아보기 위하여 사전 사후 검사를 실시하였고, 반성적 활동에서의 학습자의 오류 처치양상을 분석하기 위해 포커스 그룹의 수학적인 의사소통을 녹음하여 분석하였다. 그리고 오류 유형 및 오류 처치를 위하여 학생들의 활동지와 녹음된 대화를 분석하였다. 연구 결과, 반성적 활동을 적용한 경우 학습자의 수학학업성취도가 상승하였다. 두 자리 수의 곱셈을 학습할 때 오류 유형은 다양하게 나타났다. 그리고 반성적 활동은 학습자가 곱셈 알고리즘에 대해 반성하고 오류가 있는 계산을 분석하여 자신의 오류를 반성적으로 되돌아보고 처치하도록 돕게 됨을 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 춘계학술대회
• /
• pp.633-635
• /
• 2022

비디오 월 컨트롤러의 운용 중에 오류가 발생하면 제어 시스템은 로그 파일을 생성하고 로그를 기록한다. 로그 기록으로 인한 시스템의 부하를 줄이기 위해 로그레벨을 사용하는데, 평상시에는 로그레벨을 낮게 설정하여 가급적 로그를 기록하지 않고 오류가 발생하였을 때 로그레벨을 변경하여 상세한 로그를 기록하도록 운용하고 있다. 이로 인해 오류를 인지하더라도 즉각적인 원인 분석 및 대처가 불가능하고 로그레벨을 변경하기 위해서는 운영자의 개입이 불가피하다. 따라서 본 논문에서는 Contextual Bandit을 이용하여 운용 상황에 따라 로그레벨을 자동으로 설정하는 모델을 제안한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.97-98
• /
• 2006

This study deals with the Transmission Error of gear tooth profile by modifying a Profile and lead of a surface of Tooth. First, we experimentally confirmed that the Transmission Error is a synthesis of the sliding Velocity between both gears. Since various types of Transmission errors appear in the experiments, we introduced definition of Transmission Error and The Optimism Design by modifying a surface parameters The test stand's performance is then evaluated through a series of multiple torque transmission error tests. Comparisons are made between data recorded before and after the test stand's redesign, and subsequently repeatability studies are performed to verify the veracity of the measured data. Finally, the experimental results are compared to the analytical predictions of two different gear analysis programs.

• 전자공학회논문지A
• /
• 제28A권5호
• /
• pp.339-346
• /
• 1991

In this paper the performance of communication system in the electrical power line using error correcting codes is analysed. The BCH codes and interleaved code are to be used for correcting burst and random errors in the power line channels. The data rate of 2400 bps and the carrier frequency of 12KHz are assumed. Actual power line noise is recorded and simulated in the BPSK PLC system model.