• Journal of Electrical Engineering and Technology
• /
• v.4 no.3
• /
• pp.330-336
• /
• 2009

This paper proposes an on-line voltage management and control solution for a distribution system which can improve the efficiency and accuracy of existing off-line work by collecting customer voltage on-line as well as the voltage compensation capability of the existing ULTC (Under Load Tap Changer) operation and control strategy by controlling the ULTC tap based on pattern clustering and recognition. The proposed solution consists of an ADVMD (Advanced Digital Voltage Management Device), a VMS (Voltage Management Solution) and an OLDUC (On-Line Digital ULTC Controller). An on-line voltage management emulator based on multi-thread programming and the shared memory method is developed to emulate on-line voltage management and digital ULTC control methodology based on the on-line collection of the customer's voltage. In addition, using this emulator, the effectiveness of the proposed pattern clustering and recognition based ULTC control strategy is proven for the worst voltage environments for three days.

• International Journal of Quality Innovation
• /
• v.7 no.3
• /
• pp.58-69
• /
• 2006

This paper presents neural network-based recognition system for automatic light emitting diode (LED) inspection. The back-propagation neural network (BPNN) is proposed and tested. The current-voltage (I-V) characteristic data of LED from the inspection process is used for the network training and testing. This study selects 300 random samples as network training and employs 100 samples as network testing. The experimental results show that if the classification work is done well, the accuracy of recognition is 100%, and the testing speed of the proposed recognition system is almost one half faster than the traditional inspection system does. The proposed neural-network approach is successfully demonstrated by real data sets and can be effectively developed as a recognition system for a practical application purpose.

• Journal of Institute of Control, Robotics and Systems
• /
• v.13 no.9
• /
• pp.915-919
• /
• 2007

This paper proposed a transponder detection method to reduce recognition time in RFID system. It's also shown that conventional procedure of communication in the system could cause a waste of time when a reader recognizes a transponder. The reduction of recognition time can be obtained by developing a circuit to detect a transponder actively. Detecting a transponder is achieved by using the voltage variation of reader antenna voltage that happens when a transponder approaches to the vicinity of magnetic field formed by the reader. By adding a comparator to the antenna receiver of a reader, the reader can perceive approach or existence of a transponder. A reader for experiment is made using the MFRC500 by Phillips that supports ISO/IEC 14443 protocol. Comparing the proposed method with the conventional methods by experiment, there are 47.5ms reduction of recognition time maximally and 12ms in average.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.293-300
• /
• 2014

This paper proposes a novel pattern recognition approach based on the radial basis function (RBF) neural network for identifying insulation defects of high-voltage electrical apparatus arising from partial discharge (PD). Pattern recognition of PD is used for identifying defects causing the PD, such as internal discharge, external discharge, corona, etc. This information is vital for estimating the harmfulness of the discharge in the insulation. Since an insulation defect, such as one resulting from PD, would have a corresponding particular pattern, pattern recognition of PD is significant means to discriminate insulation conditions of high-voltage electrical apparatus. To verify the proposed approach, experiments were conducted to demonstrate the field-test PD pattern recognition of cast resin current transformer (CRCT) models. These tests used artificial defects created in order to produce the common PD activities of CRCTs by using feature vectors of field-test PD patterns. The significant features are extracted by using nonlinear principal component analysis (NLPCA) method. The experimental data are found to be in close agreement with the recognized data. The test results show that the proposed approach is efficient and reliable.

• Journal of Power Electronics
• /
• v.12 no.1
• /
• pp.1-9
• /
• 2012

This study investigates an application of the Hamming network-dual extended Kalman filter (DEKF) based on pattern recognition for high accuracy state-of-charge (SOC)/capacity estimation and state-of-health (SOH) prediction at various temperatures. The averaged nine discharging/charging voltage-temperature (DCVT) patterns for ten fresh Li-Ion cells at experimental temperatures are measured as representative patterns, together with cell model parameters. Through statistical analysis, the Hamming network is applied to identify the representative pattern that matches most closely with the pattern of an arbitrary cell measured at any temperature. Based on temperature-checking process, model parameters for a representative DCVT pattern can then be applied to estimate SOC/capacity and to predict SOH of an arbitrary cell using the DEKF. This avoids the need for repeated parameter measuremet.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.33 no.1
• /
• pp.65-69
• /
• 2020

The aim of this study is to improve the fault decision ability of FRTU (Feeder remote terminal unit) in DAS (Distribution automation system). FRTU uses the FI (Fault indicator) algorithm based on fault current pickup and operation of the protection device. Even if the inrush current flows or the protection device is sensitive to the transient current, FRTU may indicate incorrect fault information. To address these problems, we propose an improved fault recognition algorithm that can be applied to FRTU. We will detect a specific wave that is indicative of a fault, and use this information to identify a fault wave. The specific wave-detection algorithm is based on the duration and periodicity of the voltage, current, and harmonic variations. In addition, we propose fault recognition algorithms using voltage factor variation analysis and DWT (Discrete wavelet transform). All the wave data used in this study were actual data stored in FRTU.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.8
• /
• pp.361-367
• /
• 2002

Many failures in high voltage equipment are preceded by partial discharge activity. In this paper deals with the application of the high frequency partial discharge measurement technique in motorette. HFPD measurement is very effective method to detect the PD occurred in motorette which is the called name of test specimen for accelerating test of stator winding[1] In this study, CT type HFPD sensor is used to detect the partial discharges and a measured HFPD pattern is analyzed by fractal mathematics. The neural network algorithm is used to pattern recognition and ageing diagnosis. As a result of this study, the fractal dimensions are increased along to applied voltage and HFPD pattern recognition using neural network shown excellent recognition rate. Also, the ageing diagnosis of motorette has been Possible.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.35-41
• /
• 2006

This paper presents a new numerical algorithm for fault location estimation and for faults recognition based on the synchronized phasors. The proposed algorithm is based on the synchronized phasor measured from the synchronized PMUs installed at two-terminals of the transmission lines. In order to discriminate the fault type, the arc voltage wave shape is modeled numerically on the basis of a great number of arc voltage records obtained by transient recorder. From the calculated arc voltage amplitude it can make a decision whether the fault is permanent or transient. The results of the proposed algorithm testing through computer simulation are given.

• Journal of Biomedical Engineering Research
• /
• v.17 no.3
• /
• pp.373-378
• /
• 1996

In this paper, we calculated chronaxy value in order to determine the optimal conditions and stimulus pulse of information transmission. We also developed an electrical equivalent circuit of the hand including the contact part, which consists of two resistors (a contact resistor and finger resistor) and a capacitor. The minimum recoulition voltage was measured by using electrical stimulus. We found that the ranges of the above two resistances and the capacitance are 30-130k$\Omega$, 20-60k$\Omega$ and 10-30nF respectively. We found that the minimum recoulition voltage was the lowest at 100-300Hz and 10% of the duty ratio.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.8
• /
• pp.731-740
• /
• 1991

This paper presents a knowledge based system to solve reactive power/voltage control problem in a power system. The methods to reduce inference time are proposed in inferring the solution of problem in the knowledge base which consists of heuristic rules and inowledge of experts. A set of indices drawn from the heuristic knowledge on the power system is utilized to make up for the defect of existing knowledge based systems which determine both the location and the amount of reactive power compensation devices. The concept of set of indices developed in this paper makes it possible to infer the amount of reactive power source only since the bus order list representing priority for the location of reactive power compensator to be switched on can be determined in advance. From the fact that there exists a relationship between the system voltage pattern and the reactive power pattern in operation, the pattern recognition technique is introduced to reduce the inference time in solving the severe voltage problem. To demonstrate the usefulness of the proposed knowledge based system, the IEEE 30 bus system is chosen as a sample system. The results of case study are also presented.