• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.25 no.9
• /
• pp.75-79
• /
• 2011

The MOV(Metal Oxide Varistor), a voltage limiting element, has been installed in the SPD(Surge Protective Device) or inside the internal circuit of an electronic appliance for protection of the electric power system and electronic device against electrical surge. Such an MOV is exposed, however, to the risk of the thermal runaway resulting from excessive voltage and deterioration. In this paper, a reciprocal action has been tested and analyzed using a phosphorus bronze switching module and the low-temperature solder. And a short current break characteristic test linked with the circuit breaker has been performed to limit the inrush current when the MOV breaks down. It has been proven that the phosphorus bronze switching module installed inside the internal circuit can improve the safety of the power line system and the electronic device.

• Research in Community and Public Health Nursing
• /
• v.16 no.3
• /
• pp.249-259
• /
• 2005

Purpose: The purpose of this study was to understand the coping process that family caregivers experience during the process of care, to grasp coping behaviors used to solve problems and, finally, to develop a substantive theory by analyzing the coping process. Method: The methodology of collecting and analyzing data used in this study followed the ground theory of Strauss and Corbin(1998). Data were collected through in-depth interviews with open-ended and descriptive questions about the subjects' coping experiences, which were audio-taped and transcribed. The survey was conducted between February 2000 and February 2001. The subjects of this study were 17 women. Result: The result of the study is as follows. The coping process of family caregivers while taking care of the demented elderly was found to have six stages: problem recognition: undertaking care: struggling: mental control: burden mediation; and acceptance. These stages proceed with reciprocal action and in cycle. Conclusion: The result of this study is helpful for developing effective and individual nursing strategies suitable for each coping stage. It is necessary to develop an assessment tool that can judge caregivers' coping stage based on the result of this study. Moreover, we need continuous study to practice nursing mediation and to analyze the change about nursing effect and family members' adaptation.

• Journal of Pharmaceutical Investigation
• /
• v.27 no.4
• /
• pp.271-277
• /
• 1997

Because omeprazole(OMP) is very unstable in aqueous condition, $OMP-{\beta}-CD$, the inclusion complex of OMP and ${\beta}-cyclodextrin({\beta}-CD)$ was made and physicochemical properties of it were compared with those of OMP. Skin permeability of OMP and $OMP-{\beta}-CD$ in propylene glycol vehicle and the reciprocal action of ${\beta}-CD$ with various enhancers were examined through hairless mouse. Adhesive patches were prepared with polyisobutylene and the skin permeability and stability of OMP were investigated. The inclusion complex showed higher solubility and lower partition coefficient than OMP itself. DMSO, 1-methyl 2-pyrrolidone and sodium cholate had an enhancing effect. However ethanol and polysorbate 80 hardly showed the enhancing effect of OMP. When sodium lauryl sulfate and sodium cholate as enhancer were added in patch, the former case showed higher permeability of OMP.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.19 no.4
• /
• pp.51-57
• /
• 2011

The spin-up and the spring-back are most severe load cases in the aircraft landing gear design. These load cases are caused by reciprocal action of complex physical phenomenon such as the friction between a tire and ground, inertia of the rotation of a tire and the flexibility of a landing gear structure. Generally, the empirical formula or the theoretical formula is used to calculate the spin-up and spring-back load in the early stage of the development program of the aircraft landing gear. After the materialization of the design of a landing gear, spin-up and spring-back load are acquired by the free drop test. In this study, the spin-up and the spring-back load of the rubber shock absorber type KC-100 nose landing gear are calculated by the explicit finite element analysis. Through this analysis, more accurate and realistic spin-up and spring back loads could be applied to the early phase of the development of the aircraft landing gear.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.9 no.3
• /
• pp.60-67
• /
• 2001

As a method of variable valve train(VVT), Electro-Mechanical Valve(EMV) has been studied. Compared with conventional VVT system, the EMV system has a relatively simple structure. The system has two electromagnets, springs and an armature. The system can be operated by reciprocal action between armature and two electromagnets. And, the operating event can be controlled by electrical signal from controller. Therefore, reduction of emission and fuel consumption can be achieved through valve event control at each engine operating condition. In this study, characteristics of EMV system were investigated by simulations and experiments. The results of simulation and experiment show that the core shape and material characteristics are dominant parameters on magnetic force and delay time. In order to apply the system to commercial engine, it has a compact size and high stiffness springs(50N/mm) to increase the valve speed. Because of high valve seating velocity, loud noise and high impact force generated, which can lead to reduction of actuator durability. Therefore, further research is required to reduce valve seating velocity.

• YAKHAK HOEJI
• /
• v.34 no.2
• /
• pp.112-116
• /
• 1990

8-Acyl-2-hydroxyphenzaine -5, 10-dioxides and 8-acyl-2-aminophenazine-5, 10-dioxides bearing n-butanoyl, n-hexanoyl and n-octanoyl groups were synthesized. It was attempted to observe the effect of phenazine dioxide derivatives on the hepatic xanthine oxidase activity in this study. As the activity of xanthine oxidase, the key enzyme in the generation of superoxide anion radical ($O_2$), was measured in the presence of phenazine dioxide derivatives, the action of 8-acyl-2-hydroxyphenazine-5,10-dioxide derivatives inhibited with increase of numbers of carbon atom bearing 8-acyl group. Moreover, when plotted on double reciprocal form, the Vmax value decrease as increase of numbers of carbon atom bearing acyl groups without affecting the Km value. However, the hepatic xanthine oxidase activity was not changed by 8-acyl-2-aminophenazine-5,10-dioxide derivatives.

• BMB Reports
• /
• v.42 no.1
• /
• pp.28-34
• /
• 2009

To understand the molecular mechanism underlying proline accumulation in Brassica napus, cDNAs encoding ${\Delta}^1$-pyrroline-5-carboxylate synthetase (BnP5CS), ornithine $\delta$-aminotransferase (BnOAT) and proline dehydrogenase (BnPDH) were isolated and characterized. Southern blot analysis of BnP5CSs in B. napus and its diploid ancestors suggested a gene loss may have occurred during evolution. The expression of BnP5CS1 and BnP5CS2 was induced, while the expression of BnPDH was inhibited under salt stress, ABA treatment and dehydration, prior to proline accumulation. The upregulation of BnOAT expression was only detected during prolonged severe osmotic stress. Our results indicate that stress-induced proline accumulation in B. napus results from the reciprocal action of activated biosynthesis and inhibited proline degradation. Whether the ornithine pathway is activated depends on the severity of stress. During development, proline content was high in reproductive organs and was accompanied by markedly high expression of BnP5CS and BnPDH, suggesting possible roles of proline during flower development.

• The Transactions of the Korea Information Processing Society
• /
• v.4 no.5
• /
• pp.1257-1266
• /
• 1997

The concepts of class, inheritance and information hicing and so on provide the great strengthes of object-oriented languages, but they also introduce diffculties in porfram analysis and understanding. Particulary, it is move difficult to umderstand the dyamic aspects than the static ones of object-oriented programs. The dyamicaspects can be understood by recognizing the event's reciprocal action among the classes. In this paper, it will be supplied to the reprecentation of event abstraction which is useful for understanding the object-oriented programs.And the clustering concept with the events will be applied to abstract the events. By clustering the events, user can get the information about function of the classes and the reteival of the class library.

• Journal of Korean Clinical Nursing Research
• /
• v.18 no.2
• /
• pp.275-283
• /
• 2012

Purpose: This study was conducted to compare pain, sense, bleeding, and hematoma that patients feel depending on the process of eliminating air of pressure band that was applied to patients after percutaneous coronary intervention (PCI) through radial artery. Methods: It was a nonequivalent control group pretestposttest design to compare pain, sense, bleeding, and hematoma by amount and time of eliminating air of pressure band after PCI through radial artery. Results: On arrival at Coronary Care Unit, meaningful difference didn't exist between pain and sense, however, after two hours of starting eliminating air, the points of pain and sense were meaningfully low (p<.001). Also, there was meaningful difference in reciprocal action between group and time (p<.001). Conclusion: After PCI, the conclusion showed there is positive effect in decreasing wrist pain and sense without any influence of bleeding by eliminating air from patients' pressure bands.

• Journal of Fashion Business
• /
• v.14 no.6
• /
• pp.118-133
• /
• 2010

This study aimed to seek character and design of fashion cultural product using an optical fiber, and inquire element to be able to apply when an optic-fiber design differentiation develop into craft art and design. At present, optical fibers are commercialized with the brands of Luminex, Lumitex, Lumigram, etc., and the products are developed diversely in cloths, fashion articles, and interior products. When electronic technology becomes confused not visually in the technology of textile, the characteristics of fashion designs applied with optical fiber can be approximately classified for amusement, sensitivity direction, interaction, and protective performances. Sensitive design is taken a serious view as a new expression method to be interesting and attractive as well as a kind of amusement method to make people feel fortuity they do not experience in normal fashion. Also, it pursues function of body protection as a medium of communication to convey message to wearer and observer on the basis of reciprocal action between clothes and wearer. Fashion cultural product using an optical fiber is a kind of amusement to be interesting and attractive as well as it pursues function of body protection as a medium of communication to convey message and sensitive design which is attractive.