본 논문은 무선 애드혹 네트워크에서 채널 효율성 및 네트워크 성능 향상을 위한 멀티채널 MAC 프로토콜을 제안한다. 멀티채널 MAC 프로토콜 설계에는 랑데부 문제(rendezvous problem)와 멀티채널 히든 노드 문제 등 두개의 주요한 문제가 있다. 기존에 제안된 여러 멀티채널 MAC 프로토콜에서는 하나의 채널을 공통 컨트롤 채널로 사용하여 컨트롤 패킷 교환을 통해 이러한 문제들을 해결하였는데, 이것은 데이터 채널이 증가할수록 높은 경쟁으로 인한 공통 컨트롤 채널의 병목 현상을 초래하여 비효율적인 데이터 채널 이용의 원인이 된다. 본 논문에서 제안하는 멀티채널 MAC 프로토콜은 멀티채널 히든 노드 문제를 해결하기 위해 TDMA 방식을 사용하였고, 데이터를 동시에 송수신할 수 있도록 하여 네트워크 성능을 높인다. 또한 공통 컨트롤 채널을 사용하지 않기 때문에 공통 컨트롤 채널 병목 현상이 발생하지 않고, 전송 또는 수신할 데이터가 없는 노드는 슬립(sleep) 상태를 유지하도록 하여 에너지 절감(energy savings)이 가능하다. 모의실험결과는 제안한 MAC 프로토콜이 기존의 방법에 비해 네트워크 성능 및 채널 효율성을 향상시키고 에너지를 절감할 수 있다는 것을 보여준다.
This work experimentally determined the effect of operating parameters such as temperature and solid retention time (SRT) on the phosphorus removal of municipal wastewater with waste-tire media. The experiments were carried out in pilot-scale moving bed biofilm reactor filled at a 0.15 filling ratio with the media. Total phosphorus (TP) removal efficiency was $91{\pm}5$, $75{\pm}16$, and $59{\pm}14%$ at the temperature of 9~10, 10~20, and $20{\sim}26^{\circ}C$, respectively. TP removal efficiency was $71{\pm}17$, $74{\pm}16$, $74{\pm}16$, and $68{\pm}18%$ at the SRT of 3.5~5, 5~10, 10~15, and 15~20 days, respectively. At the nitrate concentration of 1~3, 3~6, and 6~9 mg/L, TP removal efficiency was $82{\pm}9$, $68{\pm}18$, $47{\pm}7%$, respectively. The concentration of total phosphorus in the effluent was $0.1{\sim}1.8(0.8{\pm}0.4)mg/L$ regardless of operating conditions, which meets Korean phosphorus limit value, 2 mg/L, for discharge into receiving waters.
Polysilicato-iron coagulant (PSI) is receiving attention in Japan as a substitute for aluminum-based coagulants. In the first part of this article, coagulation, sedimentation and filtration experiments were carried out using kaolin clay particles as the turbidizing material and four types of PSI with various molar ratios of polysilicic acid to ferric chloride (Si/Fe ratio). Results demonstrate that use of a PSI with a high Si/Fe ratio can cause a more dramatic decrease in treated water turbidity but a higher suction time ratio (STR) than when PACl is used. However, optimization by increasing the rapid agitation strength GR is found to greatly improve the STR. In addition, the series of filtration experiments verified that optimization of GR is greatly effective in controlling rapid increases in filter head loss, and also formation of a thin aging layer in the upper part of the filter bed by slow-start filtration is effective in improving filtered water turbidity over the entire filtration process. The second part of this article describes two innovative filtration techniques to increase the particle separation efficiency; (1) coagulant-coated filter medium by enhancing the electrical potential of the surface of the filter medium, and (2) coagulant dosing in influent by controlling the electrical potential of particles entering the filter layer. From the results of the various filtration experiments using a pilot plant, these two techniques were found to be very effective to reduce the effluent water turbidity from the start to the end of a filter run. Moreover, in the filtration experiments using these two methods simultaneously, higher removal efficiency of approximately 3-log (99.7%) was realized, resulting that the finished water turbidity was accordingly reduced to 0.004mg/L.
International journal of advanced smart convergence
/
제7권1호
/
pp.42-47
/
2018
Recently, as the demand for limited resources continues to rise and problems of resource depletion rise worldwide, the importance of renewable energy is gradually increasing. In order to solve these problems, various methods such as energy conservation and alternative energy development have been suggested, and biogas, which can utilize the gas produced from biomass as fuel, is also receiving attention as the next generation of innovative renewable energy. New and renewable energy using biogas is an energy production method that is expected to be possible in large scale because it can supply energy with high efficiency in compliance with energy supply method of recycling conventional resources. In order to more efficiently produce and manage these biogas, a biogas plant has emerged. In recent years, a large number of biogas plants have been installed and operated in various locations. Organic wastes corresponding to biogas production resources in a biogas plant exist in a wide variety of types, and each of the incoming raw materials is processed in different processes. Because such a process is required, the case where the biogas plant process is inefficiently operated is continuously occurring, and the economic cost consumed for the operation of the biogas production relative to the generated biogas production is further increased. In order to solve such problems, various attempts such as process analysis and feedback based on the feedstock have been continued but it is a passive method and very limited to operate a medium/large scale biogas plant. In this paper, we propose "CNN-based production yield prediction algorithm for increasing process efficiency of biogas plant" for efficient operation of biogas plant process. Based on CNN-based production yield forecasting, which is one of the deep-leaning technologies, it enables mechanical analysis of the process operation process and provides a solution for optimal process operation due to process-related accumulated data analyzed by the automated process.
이 논문은 직교 주파수 다중 전송 통신 방식의 첨두대 평균 전력비를 줄이기 위하여 대역폭과 전력의 효율성을 고려하여 파일롯과 데이터 심볼에 회전 위상을 중첩한 기법에 대한 연구 논문이다. 즉 파일롯 심볼에 위상 회전 벡터를 부가하여 파일롯 심볼 사이의 데이터 심볼의 위상 회전 벡터를 파일롯 심볼의 위상 회전 벡터와 동일하게 하여 전송하는 기법이다. 이러한 방식에 따라 송신기는 부분 분할 전송 기법에 의한 첨두대 평균 전력비를 줄일 수 있고 수신기에서 위상 회전 벡터를 파일롯 심볼의 채널 추정에 의하여 원래의 데이터 심볼을 복원할 수 있다. 따라서 송신기에서는 별도의 부반송파를 첨두대 평균 전력비의 저감하는 용도로 사용하지 않음으로써 효율적인 대역폭의 운용이 가능하고 수신기에서 위상 회전 벡터에 대한 부가적인 전송에 따른 오류에 의한 비트 오율의 급격한 증가를 방지할 수 있다. 다시 말해서 대역폭과 전력 및 통신 성능을 모두 개선할 수 있는 방법이라 할 수 있다.
RFID는 항만 물류의 효율성을 높일 수 있는 기술로 주목을 받고 있다. 특히 컨테이너 용 e-Seal 등 능동형 RFID 기술에 대한 관심이 높다. 그런데 능동형 RFID 뿐 아니라 수동형 RFID나 전통적인 바코드 시스템을 복합사용하면 전체 항만 물류 처리과정의 효율을 증대시킬 수 있다. 그러나 각 RFID 리더 및 인식 장치에 종속적인 다양한 제어 인터페이스로 인해 복합사용 환경 구축에 많은 어려움을 겪고 있다. 본 논문은 Smart Reader Interface라는 장치 독립적인 공통의 인터페이스를 통해 다양한 RFID 리더 및 인식 장치를 제어 할 수 있는 RFID 미들웨어를 설계하였다. 우리는 관련 표준, 처리의 효율성, 새로운 리더 추가에 대한 확장성 등을 주요 고려 사항으로 설계에 반영하였다. 설계 결과를 바탕으로 실제 다양한 상용 RFID 리더를 지원하도록 시스템을 구현하였다. 실험실 환경 뿐 아니라 실제 광양항 컨테이너 부두에서 실시한 실험을 통해 개발한 시스템의 실용성을 검증하였다.
최근에는 인쇄량이 많아 지면서 동일 네트워크내에서 여러 대의 프린터들을 운영하고 있는 실정이며, 다수 개의 프린터를 운영하는 경우에 대한 관리가 필요한 상태이다. 이를 위해 2대 이상의 프린터와 유선 또는 무선 통신망으로 연결된 컴퓨터를 구동시키는 프로그램으로서 컴퓨터의 제어부가 지정파일에 대한 인쇄명령을 수령하게 되면, 제어부가 프린터로부터 상태 정보를 수신하고, 프린터를 선택하는 단계와 인쇄명령 실행을 전송하는 단계를 실행하게 된다. 연구의 방법으로는 선행기술연구와 문헌조사를 통해 본 연구와의 차별성을 선정할 수 있는 방법을 제시했다. 따라서 다수개의 프린터들의 실시간 상태 정보에 따라 스마트한 인쇄명령을 분배하여 프린터의 관리 효율을 증가시키고, 다수개의 프린터들의 누적 작업량과 가용 작업량에 따라 인쇄명령을 분배하여 다수개의 프린터들의 부품 교체를 일시에 할 수 있도록 하는 것이 연구의 목적이다.
목적 : 말기암 환자에서 발생하는 악성 흉막삼출액의 치료로 흉관삽입후 경화제를 주입하여 흉악유착을 유발하는 대증요법이 많이 이용된다. 그러나 이들 경화제의 종류 및 투여방법에 따라서 그 효과 및 부작용은 달라진다. 이에 대표적으로 이용되는 경화제인 doxycycline 과 bleomycin의 단기간의 효과 및 부작용을 비교 분석하기 위하여 본 연구를 실시하였다. 방법 : 1993년 l월부터 1995년 9월까지 세포조직학적으로 악성 흉막전이가 확인되었으며 증상완화를 위해서 반복천자가 필요하였던 34명(폐암 28 명, 기타암 6명)을 대상으로 무작위로 doxycycline (16례)과 bleomycin(18례)를 흉막강내에 주입하여 입원기간 중의 단기간의 치료반응과 처치시에 생기는 부작용을 비교하였다. 그리고 치료 반응군과 실패군에서의 중앙생 존기간을 조사하였다. 성적 : Doxycycline 군의 성공률은 87.5 %로 bleomycin 군의 50.0%보다 유의하게 높았다(p=0.02). 부작용으로 통증은 두 군사이에 유의한 차이는 없었으나 발열, 오심은 bleomycin군에서 유의하게 많이 생겼다(각각 p=0.01. 0.04). 그러나 이들 대부분의 부작용은 대증요법으로 호전되었다. 치료약제의 종류에 상관없이 치료반응군의 중앙생존기간은 11개월로 치료 실패군의 5개월보다 유의하게 연장되었다(p<0.01). 결론 : 이상의 성적으로 경화제를 이용한 흉막유착술은 악성 흉막삼출액을 가진 환자의 대증요법으로 효과가 좋았다. Doxycline과 bleomycin을 비교해 보면 doxycycline이 부작용도 적었고 단기간의 치료성적도 우수하였다.
Metabolizable protein (MP) supply and amino acid balance in the intestine were manipulated through selection of highly digestible rumen-undegradable protein (RUP) sources and protected methionine (Met) supplementation. Four ruminallycannulated, multiparous Holstein cows averaging 193${\pm}$13 days in milk were used in a 4${\times}$4 Latin square design to assess N utilization and milk production responses to changes in RUP level, post-ruminal RUP digestibility and protected Met supplementation. Treatments were A) 14.0% crude protein (CP), 8.0% rumen degradable protein (RDP) and 6.0% RUP of low intestinal digestibility (HiRUP-LoDRUP); B) 14.1% CP, 8.1% RDP and 6.0% RUP of high intestinal digestibility (HiRUP-HiDRUP); C) 13.1% CP, 7.9% RDP and 5.2% RUP of high intestinal digestibility (LoRUP-HiDRUP), and D) 13.1% CP, 7.9% RDP and 5.2% RUP of high intestinal digestibility plus rumen escape sources of Met (LoRUP-HiDRUP+Met). Experimental diets were formulated to have similar concentrations of RDP, net energy of lactation ($NE_L$), neutral detergent fiber (NDF), acid detergent fiber (ADF), calcium, phosphorus and ether extract using the NRC model (2001). Results showed that dry matter intake (DMI), production of milk fat and protein were similar among treatments. Milk production was similar for diet HiRUP-LoDRUP, HiRUP-HiDRUP and LoRUP-HiDRUP+Met, and significantly higher than diet LoRUP-HiDRUP. Milk fat and protein percentage were higher for cows receiving HiDRUP treatments, with the greatest increases in the diet LoRUP-HiDRUP+Met. There was no significant change in ruminal pH, $NH_3g-N$ and volatile fatty acid (VFA) concentration among all treatments. Apparent digestibility of dry matter (DM), CP, NDF and ADF and estimated bacterial CP synthesis were similar for all treatments. Nitrogen intakes, blood and milk urea-N concentrations were significantly higher for cows receiving HiRUP diets. Urine volume and total urinary N excretion were significantly lowered by LoRUP diets. Lowering dietary RUP level while supplementing the highly digestible RUP source with rumen escape sources of Met resulted in similar milk production, maximal milk fat and protein concentration and maximum N efficiency, indicating that post-ruminal digestibility of RUP and amino acid balance in the small intestine can be more important than total RUP supplementation.
The use of petroleum fuels in grain drying causes problems of high cost and management. To solve these problems, it is required to study on soLar energy as an alternative to petroleum fuels for grain drying. The purposes of this study were to find out the optimum received area and air flow rate of a flat-plate solar air collector for grain drying and to assess its effects on grain drying with a small grain bin. The results of this study are summarized as follows ; 1. The calculated optimum tilt angles of the collector in the summer and autumn drying seasons were 20 and 50 degress, respectively, in suwon area. 2. The outlet temperature of the collector was $36^\circ C$ on the daily average with the maximum of $36^\circ C$ at 12:00 o clock. Solar radiation on the collector surface was 1.04 ly( 1 langley = 1 cal/$cm^2$) per minute on the daily average and 1.30 ly per minute on the maximum at 11:00am. The thermal efficiency of the collector was 62.4 percent on the daily average, and the air flow-rate per unit receiving are was 1.03 $m^3$/min/$m^2$.4. The calculated optimum receiving area and the air flow-rate per unit cubic volume for paddy in autumn drying season was 2 $m^2$ and 2$m^3$/min , respectively. 5. not significantly difference in the collector efficiency was appeared between the rotating and fixed type of solar collector. 6. For drying of wheat with 0.6 meter of the depth in the bin, approximately 9 hours were required to reduce the moisture content from 21.6% to 13% with air follow rate of 5 $m^3$/min an initial moisture per cubic meter of wheat and with air temperature of $52^\circ C$. 7. In the drying test of rough rice with a turning operation in a grain bin approximately 21 hours were required to reduced the moisture from 21% to 14.5% with airflow rate of 2 $m^3$/min per cubic meter of rice and the air temperature of $43.5^\circ C$. 8. Over-drying at the bottom and less -drying at the top of the grain mass was resulted from the high -temperature of drying air which was obtained from the flat-plate solar collector in this test. An appropriate operation should be prepared for the uniform moisture of the grain in the bin.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.