• Publications of The Korean Astronomical Society
• /
• v.28 no.1
• /
• pp.7-13
• /
• 2013

We present a multi-dimensional reduction method of the surveyed cube database obtained using a single- dish radio telescope in Taeduk Radio Astronomy Observatory (TRAO). The multibeam receiver system installed at the 14 m telescope in TRAO was not optimized at the initial stage, though it became more stabilized in the following season. We conducted a Galactic Plane survey using the multibeam receiver system. We show that the noise level of the first part of the survey was higher than expected, and a special reduction process seemed to be definitely required. Along with a brief review of classical methods, a multi-dimensional method of reduction is introduced; It is found that the 'background' task within IRAF (Image Reduction and Analysis Facility) can be applied to all three directions of the cube database. Various statistics of reduction results is tested using several IRAF tasks. The rms value of raw survey data is 0.241 K, and after primitive baseline subtraction and elimination of bad channel sections, the rms value turned out to be 0.210 K. After the one-dimensional reduction using 'background' task, the rms value is estimated to be 0.176 K. The average rms of the final reduced image is 0.137 K. Thus, the image quality is found to be improved about 43% using the new reduction method.

• The Journal of the Acoustical Society of Korea
• /
• v.19 no.4
• /
• pp.52-57
• /
• 2000

In this paper, we designed the 16 Kbps speech coder that has compatibility with CS-ACELP algorithm(G.729). The speech signal is sampled at rate of 16 KHz, divided into two narrowband signal by QMF filterbank, and decimated to rate of 8 KHz. The lower-band signal is encoded by CS-ACELP and the upper-band signal is encoded by Adaptive Transform Coding(ATC) algorithm. At the receiver, two band signals are synthesized by decoder of CS-ACELP and ATC, respectively. The reconstructed output is obtained by passing the QMF synthesis bank. The proposed wideband coder is evaluated with ITU-T G.722 coder through the Mean Opinion Score(MOS) test.

• Journal of the Institute of Convergence Signal Processing
• /
• v.15 no.4
• /
• pp.169-175
• /
• 2014

NG-SDH system is connected with networks throughout optical fibers. Network synchronization controller is a necessary for the data synchronization in each optical transmission system. In this paper, we have design and implementation the network synchronization controller using SOPC(system on a programmable chip) design technic. For this network synchronization controller we use FPGA in Altera. FPGA includes 32bit CPU, DPRAM(dual port ram), digital input/output port, transmitter and receiver framer, phase difference detector. We also confirm that designed network synchronization controller satisfies the ITU-T G.813 timing requirements.

• ETRI Journal
• /
• v.35 no.2
• /
• pp.245-252
• /
• 2013

In this work, we study the physical layer solutions for 10-gigabit-capable passive optical networks (PONs), particularly for an optical link terminal (OLT) including a 10-Gbit/s electroabsorption modulated laser (EML) and a 2.5-Gbit/s burst mode receiver (BM-Rx) in a novel bidirectional optical subassembly (BOSA). As unique features, a bidirectional mini-flat package and a 9-pin TO package are developed for a 10-gigabit-capable PON OLT BOSA composed of a 1,577-nm EML and a 1,270-nm avalanche photodiode BM-Rx, including a single-chip burst mode integrated circuit that is integrated with a transimpedance and limiting amplifier. In the developed prototype, the 10-Gbit/s transmitter and 2.5-Gbit/s receiver characteristics are evaluated and compared with the physical media dependent (PMD) specifications in ITU-T G.987.2 for XG-PON1. By conducting the 10-Gbit/s downstream and 2.5-Gbit/s upstream transmission experiments, we verify that the developed 10-gigabitcapable PON PMD prototype can operate for extended network coverage of up to a 40-km fiber reach.

• Electronics and Telecommunications Trends
• /
• v.34 no.5
• /
• pp.81-90
• /
• 2019

The data rate for transmission through fiber-optic cables has increased to 400 Gbps in single-wavelength channels. However, speeds up to 1 Tbps are required now to meet the ever-increasing bandwidth demand driven by the diverse requirements of contemporary applications for high-quality on-demand video streaming, cloud services, various social media, and emerging 5G-enabled applications. Because the data rates of the per-channel optical interfaces depend strongly on the operational speed of the optoelectronic devices used in optical transceivers, ultrahigh-speed photonic devices and components, and eventually, chip-level transmitter and receiver technologies, are essentially required to realize futuristic optical transceivers with data rates of 1 Tbps and beyond. In this paper, we review the recent progress achieved in high-speed optoelectronic devices, such as laser diodes, optical modulators, photodiodes, and the transmitter-receiver optical subassembly for optical transceivers in data centers and in metro/long-haul transmission.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.6
• /
• pp.2697-2710
• /
• 2018

Owing to the development of Internet of Things (IoT), the fifth-generation (5G) wireless communication is going to foresee a substantial increase of mobile traffic demand. Energy efficiency and spectral efficiency are the challenges in a 5G network. Non-orthogonal multiple access (NOMA) is a promising technique to increase the system efficiency by adaptive power control (PC) in a 5G network. This paper proposes an efficient PC scheme based on evolutionary game theory (EGT) model for uplink power-domain NOMA system. The proposed PC scheme allows users to adaptively adjusts their transmit power level in order to improve their payoffs or throughput which results in an increase of the system efficiency. In order to separate the user signals, a successive interference cancellation (SIC) receiver installed at the base station (BS) site. The simulation results demonstrate that the proposed EGT-based PC scheme outperforms the traditional game theory-based PC schemes and orthogonal multiple access (OMA) in terms of energy efficiency and spectral efficiency.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9C
• /
• pp.877-886
• /
• 2005

Various frame recovery algorithms have been suggested to overcome the communication quality degradation problem due to Internet-typical impairments on Voice over IP(VoIP) communications. In this paper, we propose a new receiver-based recovery method which is able to enhance recovered speech quality with almost free computational cost and without an additional increment of delay and bandwidth consumption. Most conventional recovery algorithms try to recover the lost or erroneous speech frames by reconstructing missing coefficients or speech signal during speech decoding process. Thus they eventually need to modify the decoder software. The proposed frame recovery algorithm tries to reconstruct the missing frame itself, and does not require the computational burden of modifying the decoder. In the proposed scheme, the Vector Quantization(VQ) codebook indices of the erased frame are directly estimated by referring the pre-computed VQ Codebook Index Interpolation Tables(VCIIT) using the VQ indices from the adjacent(previous and next) frames. We applied the proposed scheme to the ITU-T G.723.1 speech coder and found that it improved reconstructed speech quality and outperforms conventional G.723.1 loss recovery algorithm. Moreover, the suggested simple scheme can be easily applicable to practical VoIP systems because it requires a very small amount of additional computational cost and memory space.

• Journal of Korea Society of Industrial Information Systems
• /
• v.23 no.4
• /
• pp.23-31
• /
• 2018

This paper presented the implementation and design of the 2T-2R wireless HD video streaming systems over 1.7 GHz frequency band using 3GPP LTE-TDD standard on NI USRP RIO SDR platform. The baseband of the system used USRP RIO that are stored in Xilinx Kintex-7 chip to implement LTE-TDD transceiver modem, the signal that are transmitted from USRP RIO up or down converts to 1.7 GHz by using self-designed 1.7 GHz RF transceiver modules and it is finally communicated HD video data through self-designed 2x9 sub array antennas. It is that communication method between USRP RIO and Host PC use PCI express x4 to minimize delay of data to transmit and receive. The implemented system show high error vector magnitude performance above 32 dBc and to transmit and receive HD video in experiment environment anywhere. The proposed hybrid beam forming system could be used not only in the future 5G mobile communication systems under 6 GHz frequency band but also in the systems over 6 GHz frequency band like ones in mmWave frequency bands.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.765-768
• /
• 2012

본 논문에서는 USB형 DRM(Digital Radio Mondiale) 디지털라디오 수신기의 수신신호 성능 검사를 위한 DRM 수신 모니터링의 응용 S/W의 설계를 통한 수신 시스템의 신호를 분석함으로서 DRM30/DRM+신호를 수신하여, RF 상태 분석, 복조와 관련된 파라메터 확인, 오디오 서비스 정보 확인 및 오디오 재생, 텍스트 활용위한 데이터 표현, GPS 위치 정보 수신이 가능한 통합모듈 응용 S/W를 제안하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.339-342
• /
• 2003

This paper describes an RF/IF module for 2.4GHz wireless video and audio receivers The designed circuits are implemented using a Teflon board of which the size is $53mm\times42mm$. The measured LNA gain is 15dB, and the VCO output levels are around 2dBm. The sensitivity of the receiver is about -80dBm. The manufactured module consumes 140nA from a 8V supply.