• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.40-44
• /
• 2010

The timing error detector(TED) employed in the closed loop type timing synchronization scheme for an MQASK all digital receiver suffers from the selfnoise-induced timing jitter. To eliminate the timing jitter a prefilter can be added in front of the TED. The prefilter method, however, degrades the stability and timing acquisition performance due to the loop delay and increases the complexity of the synchronizer. This paper proposes a polyphase filter type resampler approach to optimize the performance and architecture of the synchronizer simultaneously. The proposed scheme uses two resamplers which performs matched filtering and matched prefiltering so that the loop delay is minimized with minimal hardware resources. Simulation results showed an excellent acquisition performance with reduced timing jitter.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2003.05a
• /
• pp.319-323
• /
• 2003

In this paper, we propose a hybrid transceiver for underwater acoustic communication, which allows the system to reduce complexity and increase robustness in time variant underwater channel environments. It is designed in the digital domain except for amplifiers and implemented by using a multiple digital signal processors (DSPs) system. The digital modulation technique is quadrature phase shift keying (QPSK) and frame synchronization is an energy (non-coherent) detection scheme based on the quadrature receiver structure. DSP implementation is based on block data parallel architecture (BDPA). We shaw experimental results in th? underwater anechoic basin at KRISO. The results indicate that the frame synchronization is performed without PLL. Also, we shaw that the adaptive equalizer can compensate frame synchronization error and the correction capability is dependent on the length of equalizer.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.311-315
• /
• 2006

Precision location and positioning of Asset within a network is an attractive feature with various applications, especially in indoor environments. Such a demand is met by the standard task group, IEEE 802.15.4a. Several methods, that is, pulse, chirp and chaotic communications have been proposed so far to satisfy the requirements of the standard. Among them, ultra wideband direct chaotic communications has advantageous features such as low hardware complexity, low cost, lower power consumption and flexible frequency band plan. In this paper, the feasibility of the ranging system using non-coherent chaotic transceiver is investigated by designing and implementing the system and the performance is proved by conducting location experiments in real indoor environments.

• Journal of the Institute of Convergence Signal Processing
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2002

Video stream invoke a variety of traffic with the structure of compression algorithm and image complexity. Thus, it is difficult to allocate the resource on the both sides of sender and receiver, and playout on the Internet such as a packet switched network. Thus, in this paper we proposed video stream smoothing using multistream for the effective transmission of video stream. This method specifies the type of LDU(logical data unit) according to the type of original stream, and then makes a large number of streams as a fixed size, and transfers them. So, the proposed method can reduce the buffering time which occurs during the process of the smoothing and prefetch be robust to the jitter on network, as well. Consequently, it has the effective transmission characteristics of fully utilizing the clients bandwidth.

• ETRI Journal
• /
• v.43 no.4
• /
• pp.640-649
• /
• 2021

In this paper, an additional degree of freedom in phased multi-input multi-output (phased-MIMO) radar with any arbitrary desired covariance matrix is proposed using space-time codes. By using the proposed method, any desired transmit covariance matrix in MIMO radar (phased-MIMO radars) can be realized by employing fully correlated base waveforms such as phased-array radars and simply extending them to different time slots with predesigned phases and amplitudes. In the proposed method, the transmit covariance matrix depends on the base waveform and space-time codes. For simplicity, a base waveform can be selected arbitrarily (ie, all base waveforms can be fully correlated, similar to phased-array radars). Therefore, any desired covariance matrix can be achieved by using a very simple phased-array structure and space-time code in the transmitter. The main advantage of the proposed scheme is that it does not require diverse uncorrelated waveforms. This considerably reduces transmitter hardware and software complexity and cost. One the receiver side, multiple signals can be analyzed jointly in the time and space domains to improve the signal-to-interference-plus-noise ratio.

• ETRI Journal
• /
• v.43 no.2
• /
• pp.221-231
• /
• 2021

To resolve energy depletion issues in massive Internet of Things sensor networks, we developed a set of distributed energy beamforming methods with one-bit feedback and clustering for multi-node wireless energy transfer, where multiple singleantenna distributed energy transmitters (Txs) transfer their energy to multiple nodes wirelessly. Unlike previous works focusing on distributed information beamforming using a single energy receiver (Rx) node, we developed a distributed energy beamforming method for multiple Rx nodes. Additionally, we propose two clustering methods in which each Tx node chooses a suitable Rx node. Furthermore, we propose a fast distributed beamforming method based on Tx sub-clustering. Through computer simulations, we demonstrate that the proposed distributed beamforming method makes it possible to transfer wireless energy to massive numbers of sensors effectively and rapidly with small implementation complexity. We also analyze the energy harvesting outage probability of the proposed beamforming method, which provides insights into the design of wireless energy transfer networks with distributed beamforming.

• The Journal of the Convergence on Culture Technology
• /
• v.7 no.3
• /
• pp.565-570
• /
• 2021

A soft-decision decoding scheme of a channel code for correcting an error occurring in a receiver of a digital communication systems is proposed. A method for efficiently decoding by use of the linear and arithmetic structure of linear block codes is presented. In this way, the probability of decoding errors has been reduced. In addition, it is possible to reduce the complexity of decoding as well. Sufficient conditions for achieving optimal decoding has been derived. As a result, the sufficient conditions enable efficient search for candidate codewords. With the proposed decoding scheme, we can effectively perform the decoding while lowering the block error probability.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.11
• /
• pp.4011-4027
• /
• 2021

Cloud Computing has emerged as an extensively used technology not only in the IT sector but almost in all sectors. As the nature of the cloud is distributed and dynamic, the jeopardies present in the current implementations of virtualization, numerous security threats and attacks have been reported. Considering the potent architecture and the system complexity, it is indispensable to adopt fundamentals. This paper proposes a secure authentication and data sharing scheme for providing security to the cloud data. An efficient IPSO-KELM is proposed for detecting the malicious behaviour of the user. Initially, the proposed method starts with the authentication phase of the data sender. After authentication, the sender sends the data to the cloud, and the IPSO-KELM identifies if the received data from the sender is an attacked one or normal data i.e. the algorithm identifies if the data is received from a malicious sender or authenticated sender. If the data received from the sender is identified to be normal data, then the data is securely shared with the data receiver using SHA256-RSA algorithm. The upshot of the proposed method are scrutinized by identifying the dissimilarities with the other existing techniques to confirm that the proposed IPSO-KELM and SHA256-RSA works well for malicious user detection and secure data sharing in the cloud.

• International Journal of Computer Science & Network Security
• /
• v.24 no.9
• /
• pp.41-49
• /
• 2024

This paper proposes dual symbol superposition block carrier transmission with frequency domain equalization (DSS-FDE) system. This system is based upon χ-transform matrix, which is obtained by concatenation of discrete Hartley transform (DHT) matrix and discrete Fourier transform (DFT) matrices into single matrix that is remarkably sparse, so that, as it will be shown in this paper, it only has non-zero entries on its principal diagonal and one below the principle anti-diagonal, giving it shape of Latin alphabet χ. When multiplied with constellation mapped complex transmit vector, each entry of resultant vector is weighted superposition of only two entries of original vector, as opposed to all entries in conventional DFT based OFDM. Such a transmitter is close to single carrier block transmission with frequency domain equalization (SC-FDE), which is known to have no superposition. The DSS-FDE offers remarkable simplicity in transmitter design and yields great benefits in reduced complexity and low PAPR. At receiver-end, it offers the ability to harvest full diversity from multipath fading channel, full coding gain, with significant bit error rate (BER) improvement. These results will be demonstrated using both analytical expressions, as well as simulation results. As will be seen, this paper is Part III of three-paper series on alternative transforms for multicarrier communication (MC) systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1319-1332
• /
• 2004

Multicarrier direct sequence code-division multiple access CDMA(MC DS-CDMA) is an attractive technique for achieving high data rate transmission even if the potentially large peak-to-average power ratio(PAPR) is an important factor for its application. On the other hand, code select CDMA(CS-CDMA) is an attractive technique with constant amplitude transmission of multicode signal irregardless of subchannels by introducing code selection method. In this paper we propose a new multiple access scheme based on the combination of MC DS-CDMA and CS-CDMA. Proposed scheme, which we called MC CS-CDMA, includes the sutclasses of MC DS-CDMA and CS-CDMA as special cases. The performance of this system is investigated for multipath Sequency selective fading channel and maximal ratio combining with rake receiver. In addition the PAPR of proposed system is compare with that of both MC BS-CDMA and CS-CDMA. Simulation results show that proposed system improves PAPR reduction than MC DS-CDMA at the expense of the complexity of receiver and the number of available non. Also, the numerical result shows that the proposed system is better performance than MC DS-CDMA due to the increasing processing gain and the number of time diversity gain.