• ETRI Journal
• /
• v.31 no.3
• /
• pp.263-270
• /
• 2009

This paper investigates linear soft combination schemes for cooperative spectrum sensing in cognitive radio networks. We propose two weight-setting strategies under different basic optimality criteria to improve the overall sensing performance in the network. The corresponding optimal weights are derived, which are determined by the noise power levels and the received primary user signal energies of multiple cooperative secondary users in the network. However, to obtain the instantaneous measurement of these noise power levels and primary user signal energies with high accuracy is extremely challenging. It can even be infeasible in practical implementations under a low signal-to-noise ratio regime. We therefore propose reference data matrices to scavenge the indispensable information of primary user signal energies and noise power levels for setting the proposed combining weights adaptively by keeping records of the most recent spectrum observations. Analyses and simulation results demonstrate that the proposed linear soft combination schemes outperform the conventional maximal ratio combination and equal gain combination schemes and yield significant performance improvements in spectrum sensing.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.404-411
• /
• 2009

In this paper, in order to increase system capacity and reduce the transmitting power of the user's equipment, we propose an efficient power estimation consisting of a modified open-loop power control (OLPC) and closed-loop power control (CLPC) schemes for mobile/satellite communications systems. The OLPC works well if the forward and reverse links are perfectly correlated and the CLPC is sensitive to round-trip delay (RTD). Therefore, it is not effective in mobile/satellite system. In order to solve the above problem, we added monitoring equipment to both the OLPC and CLPC to use information about transmitting power that has not yet been received by the receiver over the satellite/ATC channel. Moreover, we adapted an efficient pilot diversity of both OLPC and CLPC in order to get a better signal to interference plus noise ratio (SIR) estimation of the received signal.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.7 no.2
• /
• pp.71-78
• /
• 2012

Based on the Zigbee-based wireless sensor network, I suggest the way to reduce errors between the short distance, improving the accuracy of the presumed distance by revising the deviation of RSSI(Received Signal Strength Indication) values is to estimate the distance using only the RF signal power without the additional hardware. In general, the graph measured by RSSI values shows the proximity values which are ideally reduced in proportion to the distance under the free outdoor space in which LOS(Line-Of-Sight) is guaranteed. However, if the result of the received RSSI values are each substituted to the formula, it can produce a larger margin of error and less accurate measurement since it is based upon the premise that this free space is not affected by reflected waves or obstacles caused by the ground and electronic jamming engendered by the environment. Therefore, the purpose of this study is to reduce the margin of errors between the distances and to measure the proximity values with the ideal type of graph by suggesting the way to revise the received RSSI values in the light of these reflected waves or obstacles and the electronic jamming. In conclusion, this study proves that errors are reduced by comparing the proposed deviation correction method to the revised RSSI value.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.11
• /
• pp.2281-2285
• /
• 2009

Powerline communication is the data signal which is modulated by carrier frequency through the installed powerline at in-home or office is transmitted and received signals are separated into data signal with using band-pass filter which cent-frequency is carrier frequency. The home gateway, an equipment which works as an gateway for ubiquitous home network, relays all functions of a home network. The home gateway must always be connected in order to provide seamless services. However it gives unfavorable power consumption. Therefore the needs for working in maximum power saving mode while there is no data traffic and for invoking to the normal function when it is necessary. So, in this paper we survey the development of low power PLC modem monitoring of power consumption and breaking abnormal power in the home Network.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.288-298
• /
• 2016

Proactive relay selection in cognitive radio networks has recently received considerable attention. However, its outage probability analysis is limited to partially-identical fading distributions, uncorrelation among received signal-to-noise ratios (SNRs), and no direct channel. This paper completes this literature deficiency by generalizing the existing analysis for non-identical fading distributions, correlation among received SNRs, and with direct channel. Numerous results demonstrate that relay selection with a direct channel achieves a higher diversity order and superior performance than that without a direct channel at virtually no cost of power and bandwidth. Further, proactive relay selection suffers an error floor at either a large maximum transmit power or large maximum interference power; however, the error floor level can be significantly remedied with an increase in the number of relays.

• Journal of Positioning, Navigation, and Timing
• /
• v.8 no.4
• /
• pp.183-192
• /
• 2019

In fingerprint-based wireless positioning, it is necessary to establish a DB of the unmeasured area. To this end, a method of estimating the position of a base station based on a signal propagation model, and a method of estimating the information of the received signal in the unmeasured area based on the estimated position of the base station have been investigating. The purpose of this paper is to estimate the position of the base station using the measured information and to analyze the performance of the positioning. Vehicles equipped with a GPS receiver and signal measuring equipment travel the service area and acquire location-based Reference Signal Received Power (RSRP) measurements. We propose a method of estimating the position of the base station using the measured information. And the performance of the proposed method is analyzed on a simulation basis. The simulation results confirm that the accuracy of the positioning is affected by the measured area and the Dilution of Precision (DOP), the accuracy of the position information obtained by the GPS receiver, and the errors of the signal included in the RSRP. Based on the results of this paper, we can expect that the position of the base station can be estimated and the DB of the unmeasured area can be constructed based on the estimated position of the base stations and the signal propagation model.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.119-125
• /
• 2008

In this paper, we proposed the modeling of UHF frequency environment in a random mountainous area with line of sight. A transmitting station is defined as wanted transmitter(Wr) and a receiving station is defined as victim receiver(Vr). These set up victim link. A interference transmitter(It) and wanted receiver(Wr) set up interference link. We compared measured data at random mountainous area with data of the result using spectrum engineering advanced monte calo analysis tool(SEAMCAT), interference simulation based on the monte-carlo method. The desired received signal strength(dRSS) of SEAMCAT had the calculated error of 70% from the measured received signal strength because there was a topographical effect. Therefore, the effect of diffraction interference was included to lessen the power of transmitter in the proposed simulation. The cause of received power error are cable loss and errors of a measuring instrument. The proposed simulation modeling in UHF frequency environment expect that is the useful study on interference analysis and reassignment of broadcasting frequency.

• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.8
• /
• pp.890-894
• /
• 2014

In this paper, we derive the CRLB (Cramer-Rao Lower Bound) of effective carrier-to-noise power ratio ($C/N_0$) estimation for a GPS (Global Positioning System) L1 C/A (Coarse/Acquisition) signal under band-limited white noise jamming environments. The quality of a received GPS signal is commonly described in terms of its $C/N_0$, implying that the noise is white and thus can be described by scalar noise density. However, if some intentional interference is received to a victim GPS receiver, then the $C/N_0$ is no longer the efficacious performance indicator. The correct and straightforward measurement to analyze the receiving situation is the effective $C/N_0$. In this paper, we consider a band-limited white noise jamming whose bandwidth is 2MHz and is the same as one of the first null-to-null bandwidth of the GPS L1 C/A signal.

• Journal of Digital Contents Society
• /
• v.17 no.2
• /
• pp.89-96
• /
• 2016

SVC(Scalable Video Coding), which is one form among video encoding technologies, makes video streaming with the various frame rate, resolution, and video quality by combining three different scalability dimensions: temporal, spatial, and video quality scalability. As the above SVC-encoded video streaming consists of one base layer and several enhancement layers, and a wireless AP(Access Point) chooses and sends a suitable layer according to the received power from the receiving terminals in the changeable wireless network environment, the receiving terminals supporting SVC are able to receive video streaming with the appropriate resolution and quality according to their received powers. In this paper, after the performance analysis for the received power, packet loss rate, PSNR(Required Peak Signal to Noise Ratio), video quality level and amount of received video data based on the number of SVC layers was performed, an efficient method for selecting the number of SVC layer satisfying the RSNR and minimizing the amount of received video data is proposed.

• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.11-17
• /
• 2010

Recent technological advances allow us to envision a future where large numbers of low-power, inexpensive sensor devices are densely embedded in the physical environment, operating together in a wireless network. This paper considers localization for mobile sensors; localization must be invoked periodically to enable the sensors to track their location. Localizing more frequently allows the sensors to more accurately track their location in the presence of mobility. In this paper, we test and analyze the accuracy of a moving node localization by Received Signal Strength (RSS).