• Journal of Biosystems Engineering
• /
• 제35권1호
• /
• pp.21-30
• /
• 2010

This study was performed to develop an active tire pressure control system that can adjust tire pressure to the optimum level according to traveling and working condition of agricultural tractor. For the development of active tire pressure control system, pneumatic supplier, solenoid valve block including pneumatic supply line, infinite rotation type pneumatic supplier with rotary joint unit, tire pressure transceiver module and control algorithm were developed. Also, tire simulator was developed. Using this tire simulator, the feasibility of each part constructing actual system was tested by checking the performance. The average communication success ratio was 98.3% between tire pressure transmitter and receiver module according to the various tire rotational speed and data receipt position of receiver module. The communication performance of the developed transmitter and receiver module was very stable in any condition. The tire pressure control system was accomplished by using the proportional control algorithm in this study. Also tire pressure control performance of developed control system was analyzed by using the tire simulator. As a result of control performance analysis to the developed system, the developed control system took 307 seconds to inflate agricultural tractor's tire from 50 kPa to 180 kPa. In opposite case, it took 210 seconds. Also it was able to control the tire pressure accurately under ${\pm}0.9%$ (FS) in any condition.

• 핵의학기술
• /
• 제13권3호
• /
• pp.193-195
• /
• 2009

Purpose: The work flow of international hospital's laboratory consists of rapid test and result report at the present day. However, the frequent inquiry of sample, which cause affairs to delay and efficiency to Lower, affects medical examination. In order to promote work's efficiency, we should improve the problem and make work smooth between a laboratory, outs and ward. Materials and Methods: This study runs as follows. First, Investigating test result, test schedule, test receipt, quick result, etc through the activity required from September to November 2007 about the inquiry of sample. After analysis of the problem in December, remaking the test schedule for improvement solution and reporting it to outs and ward. When the result is retest and dilution, we directly fill in a result space with the result situation of the patient to let them know beforehand. We also, prevent the omission of the result through checking the sample list and discriminate in vivo from in vitro by changing the laboratory's telephone number. We have improved the problem about the inquiry of sample through valuation and analysis since the improvement activity from January to March 2008. Result: The case about the frequent inquiry of sample has reduced by 57.8%. this improvement activity indicated that p-value<0.05 was statistically significant through paired t-test. This activity make study smooth and we rapidly report the result. Conclusion: By reducing the case regarding the inquiry of sample, work discontinuation, and concentration reduction, the work efficiency was increased.

• 정보학연구
• /
• 제6권3호
• /
• pp.169-188
• /
• 2003

전세계적인 무역환경변화에 따른 인터넷을 이용한 수출입을 지칭하는 이른바 '사이버무역'의 시대가 진행되고 있다. 이는 인터넷을 통하여 전세계에 흩어져 있는 해외 바이어와 각종 상품정보를 주고받으며, 수출입계약을 체결하는 등 무역업무 전반에 인터넷을 이용하는 것이다. 특히 해외 영업망이 없는 중소기업들은 내수 침체의 어려움을 헤쳐 나가는데 있어 사이버무역을 적극 활용하고 있다. 인터넷을 통해 주문에서 대금결제까지 할 수 있는 사이버무역은 계약 및 수출절차 소요시간의 단축과 수출에 따른 부대비용 절감 등 여러 가지 이점이 있어 기업들로부터 각광을 받고 있다. 따라서 본 연구는 기존적인 이론을 중심으로 사이버무역의 성공사례, 그리고 다수의 수출입 기업 등을 대상으로 한 실태분석자료를 토대로 우리나라 기업들이 인터넷을 이용하여 사이버무역을 수행할 때 성공할 수 있는 무역거래 ROADMAP을 제시한 것이다.

• 지능정보연구
• /
• 제7권1호
• /
• pp.1-15
• /
• 2001

최근 인터넷의 급속한 확산에 따른 전자상거래의 활성화는 조직과 규모 면에서 열세인 중소기업들의 판로 확장 및 홍보를 위한 새로운 대안으로 인식되고 있다. 그러나, 전자상거래 환경은 비약적으로 성장하고 있지만, 여전히 국내 중소기업들은 인력 및 자금의 상대적인 열세로 이러한 환경변화에 효과적으로 대응치 못하고 있다. 본 논문은 이러한 문제를 해결하기 위한 노력의 일환으로, 인터넷 상의 판매 에이전트를 지원할 수 있는 가상생산 에이전트(Virtual Manufacturing Agent)의 개발에 관한 내용을 담고 있다. 제품의 흥보, 주문의 선택 및 수락 여부에 대한 결정은 생산라인의 상태와 매우 밀접한 관계에 있다. 주문의 수락과 주문 조건에 대한 협상을 위해서는 제조가능성 여부, 생산 부하 및 생산일정 등에 대한 정보가 필요하다. 본 논문에서는 중소제조업체의 판매활동을 인터넷상에서 가능하게 하는 판매에이전트가 요구하는 생산정보를 적시에 제공할 수 있는 가상생산 에이전트를 설계, 구현하였고, 이를 통하여 구현된 시스템을 사출금형제조업체의 생산과정과 주문처리과정을 통하여 검증하였다.

• 한국산학기술학회논문지
• /
• 제13권9호
• /
• pp.4082-4089
• /
• 2012

본 연구는 병원을 이용하는 외래환자들의 불만족요인과 만족요인들을 조사하여 보다 높은 고객만족경영을 위한 기초자료를 제시하고자 하였다. 연구대상은 대전에 소재하는 일개의 종합병원 외래환자를 대상으로 2011년 10월 24일 1일간 설문조사를 실시하였다. 자료 수집은 총 160부의 설문지를 배포하여 144부를 통계분석자료로 이용하였다. 연구결과 행정지원부문의 특성 중 전반적 만족도와 타인추천 의향에 대하여 가장 많은 영향을 미치는 요인은 접수 수납 절차의 신속 간편성인 편리성으로 나타났으며 검사실 외래 진료대기실의 쾌적성도 공통으로 영향을 주는 것으로 나타났다. 이상과 같은 결과 고객을 만족시킬 수 있는 고객지향적 병원경영시스템을 구축 운영한다면 병원의 경쟁력은 향상되고 병원의 지속가능성은 높아질 것이며 고객만족경영이라는 경영목표도 달성될 수 있을 것이라 사료된다.

• 정보과학회 논문지
• /
• 제42권6호
• /
• pp.791-800
• /
• 2015

본 논문은 다중 홉 무선 네트워크 환경에서 브로드캐스트 전송 효율성 뿐 아니라 신뢰도도 우수한 기여도 기반 기회적 플러딩 기법을 제안한다. 브로드캐스트 트리를 전송 결과와 관련 없이 미리 결정하면, 무선 네트워크의 내재적 불안정성으로 지정된 릴레이 노드가 패킷을 수신하지 못할 수 있다. 본 논문에서 제안하는 기여도 기반 기회적 플러딩 기법은 릴레이 노드를 전송 결과를 기반으로 선택하는 기회적 전송의 개념을 사용하여 신뢰도를 제고하였다. 또한 전체 네트워크에 대한 단말 기여도에 따라 릴레이 우선 순위를 조정하여 불필요한 릴레이를 제거하고 전송 효율을 높였다. NS-3 시뮬레이터를 활용하여 제안 기법을 블라인드 플러딩, 그리고 도미넌트 프루닝과 비교하였다. 성능 분석 결과 제안 프로토콜은 블라인드 플러딩에 비해 릴레이 횟수에 기초한 효율 관점에서 35%, 도미넌트 프루닝에 비해 수신 노드 수에 기초한 신뢰도 관점에서 20~70% 수준의 성능 향상을 얻었다.

• 무역상무연구
• /
• 제43권
• /
• pp.117-142
• /
• 2009

The purpose of this paper is to examine the basic principles for the examination of documents in terms of the basic duty to examine the documents, the time allowed to the banks to examine the documents, linkage among the documents, the originality of documents and their issuers, and the rejection formula of documents. Further this author would look at the changes of particular transport document including bill of lading, charter-party bill of lading and so on. From the seller's perspective, the changes of the principles and individual documents under UCP600 are the most important in the sense that they affect the criteria against which the payment is made. The major changes include the omission of the phrase "with reasonable care", in terms of the basic examination principles, substitute the phrase "five banking days following the day of presentation" for the phrase "reasonable time, not to exceed seven banking days following the days of receipt of documents", introduce the new wording about the linkage between the documents tendered, and make clear the meaning of the originality of documents as well as the rejection formula. For transport documents, even though dealing with bill of lading, charter-party bill of lading, transport document covering at least two different modes of transport, freight-forwarder bill of lading and freight collect transport documents, this paper focuses on the "transhipment" of bill of lading and the definition of charter-party bill of lading. Thus, UCP has been changed several times to reflect the new banking customs and practice. It, however, would not answer every questions which users and banks will raise. These questions may be best answered in the particular underlying contract. The UCP are necessary but not a sufficient instrument for the smooth operation of an international trade transaction. The rules are now out: it remains to be seen what the players do with it.

• 한국의료질향상학회지
• /
• 제21권2호
• /
• pp.40-56
• /
• 2015

Objectives: To outline overall duties of quality improvement (QI) performers within a health care organization, thus describing their key tasks, including task element-related frequency, importance and difficulty in enough detail. Methods: A DACUM (Developing A CurriculUM) workshop took place to outline overall job activities of QI performers. To examine the scope of their duty and task, we performed a questionnaire survey of 338 QI performers from 111 hospitals. Results: The results of our survey showed that for the task assigned to each QI performer, there were 10 duties, 31 tasks and 119 task elements. Respondents cited a project planning as the most frequent/important duty, and a research was the highest level of difficulty in their duty. They also said that the most frequent task was index management, the most important task was a business plan, and the highest level of difficulty was a practical application of QI research. QI performers added that the most frequent task element was receipt of patient safety reporting in patient safety system, the most important task element was an analysis for patient safety and its improvement, and the highest level of difficulty was a regional influence analysis related to the patient safety and its improvement. Conclusion: To ensure that QI performers play a pivotal role as a manager to better improve patient safety and the quality of health care services, proper training program for them should be developed by reflecting the results of our study.

• 무역상무연구
• /
• 제58권
• /
• pp.59-98
• /
• 2013

Risk of loss is a term used in the law of contracts to determine which party should bear the burden of risk for damage occurring to goods after the sale has been completed, but before delivery has occurred. Under the Uniform Commercial Code (UCC), there are four risk of loss rules, in order of application. First, it is agreement that is the agreement of the parties controls. Second, the breaching party is liable for any uninsured loss even though breach is unrelated to the problem. Hence, if the breach is the time of delivery, and the goods show up broken, then the breaching rule applies risk of loss on the seller. Third, the delivery by common carrier other than by seller is necessary: Risk of loss shifts from seller to buyer at the time that seller completes its delivery obligations; If it is a destination contract, then risk of loss is on the seller; If it is a delivery contract, then the risk of loss is on the buyer. Fourth, if the seller is a merchant, then the risk of loss shifts to the buyer upon buyer's receipt of the goods. If the buyer never takes possession, then the seller still has the risk of loss. This paper discusses problems of risk of loss under the American law. Specifically, this paper focuses on the interpretation of UCC sections and analysis of various cases. By comparing, also, UCC and Korean law, the paper proposes some implications of risk of loss issues for Korean law.

• Nutrition Research and Practice
• /
• 제14권5호
• /
• pp.532-539
• /
• 2020

BACKGROUND/OBJECTIVES: The aim of this study was to assess the effect of nutrition education received by fourth- and fifth-grade teachers in state schools in Famagusta, Northern Cyprus, on their students. SUBJECTS/METHODS: The aim of this study is to assess the effect of nutrition education received by fourth- and fifth-grade teachers (n = 27) in state schools in Famagusta on their students. Participants (n = 718) were selected through a regional pilot scheme. The teachers were instructed on nutrition by the researcher and provided with a researcher-prepared nutrition education book "I Am Learning about Healthy Nutrition". Before receiving their nutrition education, the teachers were pretested to assess their baseline nutrition knowledge. Following receipt of their nutrition education, a posttest, which included the same questions as those in the pretest, was administered to the teachers to assess the effectiveness of the training session. Similarly, students were asked pretest researcher-prepared questions to evaluate their baseline nutrition knowledge level. The teachers were then given a period of three to four weeks to instruct the students in nutrition education. Following this instructional period, a posttest that included the same questions as those in the pretest was administered to the students. RESULTS: The results showed that there were significant differences between the pre- and posttest scores of both teachers and students; in both groups, the nutrition knowledge level increased (P < 0.05). CONCLUSIONS: These results show that the provision of nutrition education training to teachers positively affected the nutrition knowledge level of both teachers and students.