• Journal of Korea Water Resources Association
• /
• v.36 no.6
• /
• pp.893-899
• /
• 2003

In this study, a realtime bridge scour monitoring system was installed and operated to measure the real scour depths in relatively hard and rocky bottom. And riverbed change at before and after flood was investigated by GPR(Ground Penetrating Radar) to check the rationality of measured values. As the result of this study, it was revealed the inaccuracy of equilibrium scour depth estimation through the bridge scout equations because most of the equations do not reflect the differences of geological characteristics, evaluated the real scour depths considering both bed and flow conditions.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.4A
• /
• pp.393-401
• /
• 2006

Energy consumption is an important design parameter for battery-operated embedded systems. Dynamic power management is one of the most well-known low-power design techniques. This paper proposes an online realtime scheduling algorithm, which we call energy-aware realtime scheduling using slack stealing (EARSS). The proposed algorithm gives the highest priority to the task with the largest degree of device overlap when the slack time exists. Scheduling result enables an efficient power management by reducing the number of state transitions. Experimental results show that the proposed algorithm can save the energy by 23% on average compared to the DPM-enabled system scheduled by the EDF algorithm.

• Korean Journal of Computational Design and Engineering
• /
• v.8 no.2
• /
• pp.65-74
• /
• 2003

For virtual reality, virtual manufacturing system, or simulation based design, we need to visualize very large and complex 3D models which are comprising of very large number of polygons. To overcome the limited hardware performance and to attain smooth realtime visualization, there have been many researches about algorithms which reduce the number of polygons to be processed by graphics hardware. One of these algorithms, occlusion culling is a method of rejecting the objects which are not visible because they are occluded by other objects, and then passing only the visible objects to graphics hardware. Existing occlusion culling algorithms have some shortcomings such as the required long preprocessing time, the limitation of occluder shape, or the need for special hardware implementation. In this study, an efficient occlusion culling algorithm is proposed. The proposed algorithm reads and analyzes Z-buffer of graphics hardware using Microsoft DirectX, and then determines each object's visibility. This proposed algorithm can speed up visualization by reading Z-buffer using DirectX which can access hardware directly compared to OpenGL, by reading only the region to which each object is projected instead of reading the whole Z-Buffer, and the proposed algorithm can perform more exact visibility test by using simplified model instead of using bounding box. For evaluation, the proposed algorithm was applied to very large polygonal models. And smooth realtime visualization was attained.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2B
• /
• pp.98-106
• /
• 2006

In order to provide a realtime transmission over a wireless LAM, we here present a new jamming based retransmission mechanism. In a legacy wireless LAN system, all stations use the binary exponential backoff algorithm to avoid collisions among frames. It is well known that the backoff algorithm causes more collisions as the numbers of active stations increases. This makes transmission of real time traffic hard. In the proposed scheme, when each station senses collisions, it promptly allows to send a jamming signal during a unique jamming window period which is determined by its own channel access count database(CACDB). This jamming windows is chosen not to be overlapped each other by using of CACDB, and thus channel access of another station is prevented. Hereafter the station gets the ownership of the medium when the wireless medium becomes idle after sending the jamming signal and sensing carrier, and then sends frame in medium. In our proposal, repeating collisions is never happened. We here assume that real time traffic use a frame of fixed length in order to make the time for receiving its ACK frame same. Comparing the proposed jamming-based retransmission scheme with the the 802.11 and 802.11e MAC by simulation. one can find that the proposed scheme have advantages in terms of delay, average backoff time, and average number of collisions per frame. One can find that the proposed scheme might be practically applicable to several applications of realtime traffic transmission in wireless LAN systems.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.46-55
• /
• 2012

This study proposes an estimate method of willingness to pay(WTP) for real-time route guidance systems using contingent valuation method(CVM) under double bounded dichotomous choice question(DBDCQ) and analysis for impact factors of WTP estimation. This study assumed that provided real-time traffic information service is optimal route concepts dealing with traffic conditions on origin-destination. Analysis targets were classified into two groups as short distance path and middle distance path for estimating WTP for realtime route guidance system in a year using the survival analysis method and the regression model with personal information, actual condition and satisfaction of information usage and users' awareness and usage of facilities. As a result, mean WTP of realtime route guidance system is 4,034won/year in short distance path, and 4,884won/year in middle distance path. Therefore real-time route guidance system for longer distance path is recognized as more valuable than shorter distance path. Moreover, the necessity of information was required on a higher income group and higher WTP was estimated on owners of vehicle group and lower awareness of a route group.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.197-208
• /
• 1996

A neural network-based PSRI(position, scale, and rotation invariant) feature extraction and ATR (automatic target recognition) system are proposed and an efficient parallel implementatio of the proposed system using multicomputer is also presented. In the proposed system, the scale and rotationinvariant features are extracted from the contour projection of the number of edge pixels on each of the concentric circles, which is input t the cooperative network. We proposed how to decide the optimum depth and the width of the parallel pipeline system for real time applications by modeling the proposed system into a parallel pipeline implementation method using transputers is also proposed. The implementation results show that we can extract PSRI features less sensitive to input variations, and the speedup of the proposed ATR system is about 7.55 for the various rotated and scaled targets using 8-node transputer system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.310-313
• /
• 2012

Recently, Land reclamation created agricultural land which is farming. Agricultural land which is farming have accident with frequency it is damage to crop of from brine. So, desalinization is the first priority prerequisite task in using the in reclaimed farm land. Vibrant research and technical development is working for reclaimed of desaliaization. But, Current technology is impossible desalinization of reclaimed land. As fast almost of people don't worry about concentration of salt in using the land reclamation of agricultural land irrigation water and river mouth of fountainhead of efforting from freshwater lake also ebb and flow of the tide land reclamation of agricultural land influnce from an increase of salt concentration by weather conditions and a malfunction of sea dike sluice In this paper, current is increased salt concentration in real time graphs were implemented to utilize external servers in using the WCDMA module. Inaddition it have to operate alarm in increase of salt concentration. besides, this program have implemented realtime concentration of salt monitoring system which save date in realtime the user can check again.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.5
• /
• pp.193-199
• /
• 2015

Recently the artificial intelligence green house system, which collects automatically the informations of plants cultivation circumstances and controls the growing circumstances, is studied using temperature, humidity and illuminance sensors. In this paper, the inference for plants cultivation of optimum circumstance conditions is simulated on the internet bases by predicting the temperature, humidity and illuminance. On the IOT circumstances, the plant cultivation conditions of temperature, humidity and illuminance, using Arduino sensor, are transmitted to the manager on realtime and if the optimum condition of temperature and humidity for plant cultivation is not equal to the values, the system transmits automatically the SMS warning messages on realtime. Although the sudden climite conditions(snow, rain, hot weather) are occurred, the optimum condition of plant cultivation can be controlled. In this paper, using Fuzzy rules and WEKA TOOL, although the same flora temperature zone is used, the simulation is produced for the optimum value of temperature, humidity and illuminance for the zone.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.1
• /
• pp.38-48
• /
• 1996

We implemented and evaluated the preformance of a task level pipelined multicomputer "RV860-PIPE(Realtime Vision i860 system using PIPEline)" for computer vision applications. RV860-PIPE is a message-passing MIMD computer having ring interconnection network which is appropriate for vision processing. We designed the node computer of RV860-PIPE using a 64-bit microprocessor to have generality and high processing power for various vision algorithms. Furthermore, to reduce the communication overhead between node computers and between node computer and a frame grabber, we designed dedicated high speed communication channels between them. We showed the practical applicability of the implemented system by evaluting performances of various computer vision applications like edge detection, real-time moving object tracking, and real-time face recognition.

• Journal of the Korea Society of Computer and Information
• /
• v.15 no.2
• /
• pp.91-98
• /
• 2010

In order to control moving facilities on a remote place effectively, it are required to acquire a environment informations such as images where the moving facilities are placed. However, since there is no tools to acquire such informations to the central control system based on the non-networked sensor environments, it is difficult to control the moving facilities remotely. Therefore, we design and implement the Zigbee based image transmission system and communication protocol to control the moving target remotely. The wireless control utilizing the Zigbee protocol is that electrically consumption is more small than the Bluetooth and reliability of data transmission is better. The implemented Zigbee based control systems and communication protocol have the normal and replay function for a realtime control of the moving target under the server PC and the mobile FDA with the WiFi protocol. The functional operability and performance are analyzed by a designed prototype under the wireless home network environment.