• International Journal of Control, Automation, and Systems
• /
• v.6 no.4
• /
• pp.534-543
• /
• 2008

To use the Global Positioning System (GPS) carrier phase measurement for precise positioning, the integer ambiguities at the early stage of most algorithms must be determined. Furthermore, if a precise positioning is to be applied to real time navigation, fast determination and validation methods for integer ambiguity are essential. In this paper, the Wald test that simultaneously determines and validates integer ambiguities is used with assistance of the Inertial Navigation System (INS) to improve its performance. As the Wald test proceeds, it assigns a higher probability to the candidate that is considered to be true at each time step. The INS information is added during the Wald test process. Large performance improvements were achieved in convergence time as well as in requiring fewer observable GPS satellites. To test the performance improvement of the Wald test with the INS information, experimental tests were conducted using a ground vehicle. The vehicle moved in a prescribed trajectory and observed seven GPS satellites. To verify the effect of the INS information on the Wald test, the convergence times were compared with cases that considered the INS information and cases that did not consider the INS information. The results show that the benefits of using the INS were emphasized as fewer GPS satellites were observable. The performance improvement obtained by the proposed algorithm was shown through the fast convergence to the true hypothesis when using the INS measurements.

• Korean Journal of Geomatics
• /
• v.2 no.1
• /
• pp.57-64
• /
• 2002

Measuring the depth of water is very important in ensuring the protection and safety of seaside. There are many difficulties in making the contour bathymetric map, and contour line due to the limitation of continuous measurement of water depth and collimation with the conventional measuring and positioning methods. But the real-time kinematic GPS (RTK GPS) positioning using a carrier phase enables us to decide a precise position without breaking a signal even under the condition of a moving environment. It is also possible to obtain an accurate depth of water in real time with a fathometer through the measuring of time delay between sending and receiving epochs. This research aims at investigation of accuracy potential of RTK GPS in combination with Echo Sounder(E/S) for the coastal mapping. Apart from this purpose, the accuracy of ambiguity resolution with the OTF(On the Fly) method was tested with respect to the initialization time. The result shows that the accuracy is better than 1cm with 5-minute initialization in the distance of 10km baseline. The seaside topography was measured by the RTK GPS only, on the other hand the seafloor topography was surveyed in combination of RTK GPS and E/S. Comparing to the volume of seaside measured by RTK GPS and digital topographical map, the difference of only 2 % was achieved. This indicates that the coastal mapping with RTK GPS is successfully conducted. In addition it is also demonstrated that the 3-dimensional perspective model resulted from the undersea topography measured by RTK GPS and E/S is very close to that from the digital map. Through this study, it was verified that RTK GPS is to be very useful method in the analysis of coastal morphology owing to its capability of getting the precise DTM for the using of harbor reclamation, dredging, and the estimation of soil movement in a river.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.65-69
• /
• 2004

기존 라디오파를 이용한 RTCM 방식에서는 전파의 직진성으로 인한 수신 장애가 많이 발생하였다. 이런 문제를 극복하기 위해 라디오 모뎀을 사용하지 않고 휴대폰에 내장된 CDMA 방식을 이용하여 이동전화국 기지국을 통한 오차 보정량을 전송하여 RTK-GPS의 문제점을 해결하고자 하였다. 연구 결과 기존 RTCM 방식과 같은 건물 차폐에 따른 신호 차단의 영향은 없었으며, 제적 작업 시에도 라디오 모뎀의 송수신의 장애로 인한 데이터 손실을 막을 수가 있었다. 마지막으로 10km이상의 거리에서도 작업을 수행하였다. 그 결과 이동전화국 기지국을 이용하였기 때문에 신호의 송수신에는 문제가 없었지만, 공간적 상관성의 문제로 인해 그 값을 쓸 수가 없었다. 따라서, 최근 증가하고 있는 GPS 측량 기법 중에서 현장에서 손쉽게 성과 값을 구하는 실시간 이동측량(RTK GPS Real Time Kinematic GPS)의 문제점을 보완하고 그 효율성을 제고하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.12
• /
• pp.1845-1855
• /
• 2004

This paper presents the forward kinematics of the Casing Oscillator that is a construction machine. The Structure of the Casing Oscillator is similar to those of 4 degree-of-freedom mechanisms with a redundancy. With analytical (geometrical) methods, the solutions of the forward position kinematics problem are significantly found by both solving an 8$^{th}$ -order polynomial equation in one unknown variable and using one over-constraint geometrical equation which can be derived under the condition of a redundancy. The proposed forward kinematics has closed-form solutions and allows Auto-Balancing control of the moving platform in real time. Numerical examples are presented and the results are verified by an inverse kinematics analysis.

• Journal of the Korean Society of Industry Convergence
• /
• v.21 no.1
• /
• pp.37-44
• /
• 2018

In this work, a 4-DOF industrial robot system with three translational and one rotational motions which is widely used in palletizing applications is developed. In order for small robot manufacturing companies to develop their own robot systems for CNC machining and/or general automations, the analysis and design methods of a 4-DOF robot manipulator are presented and the development of a PC-based robot controller with EtherCAT are introduced. It is noted that the robot controller is developed by using Simulink Real-Time, which can provide an integrated environment of easier control algorithm development and data logging. Through position control and accuracy/repeatability measurement results, the developed robot prototype has comparable performances with commercial counterparts. In the future works, the advanced functions of industrial robots such as kinematic calibration, vibration suppression control, computed torque control, etc. will be investigated.

• Proceedings of the Korean Society for Rock Mechanics Conference
• /
• 2008.10a
• /
• pp.101-114
• /
• 2008

An efficient mine management system demand constant attention of mine managers on the key performance indicators like production targets, equipment status, condition of haul roads, safety etc.. There is a wealth of information generated during day to day working of the mine. The success of a mining enterprise is a function of reliability of accumulated information and decision making on the basis of such information. In the present paper a computerized mine operations management system developed for a large opencast mine making use of the potential benefits of geographical information systems, real time kinematic global positioning systems and a communication network to improve the overall efficiency of the mine is presented.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.6 no.2
• /
• pp.10-18
• /
• 1997

This paper presents the development of real-time estimation and control details for a computer vision-based robot control method. This is accomplished using a sequential estimation scheme that permits placement of these points in each of the two-dimensional image planes of monitoring cameras. Estimation model is developed based on a model that generalizes know 4-axis Scorbot manipulator kinematics to accommodate unknown relative camera position and orientation, etc. This model uses six uncertainty-of-view parameters estimated by the iteration method. The method is tested experimentally in two ways : First the validity of estimation model is tested by using the self-built test model. Second, the practicality of the presented control method is verified in performing 4-axis manipulator's assembly task. These results show that control scheme used is precise and robust. This feature can open the door to a range of application of multi-axis robot such as deburring and welding.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2003.05b
• /
• pp.791-794
• /
• 2003

자동화 컨테이너터미널은 ATC(Automated Transfer Crane)와 AGV(Automated Guided Vehicle)와 같은 자동화 운송 장비를 사용하는 컨테이너터미널이다. 이러한 자동화 컨테이너터미널의 핵심은 생산성을 향상시키기 위한 효율적인 장비 운영이 결정적인 역할을 한다. 본 논문에서는 AGV의 이동 위치 결정을 위한 RTK-GPS(Real Time Kinematic-Global Positioning System) 위치 정보 전송 및 운용 방법에 대해서 연구하였다. 이를 위해서 기존의 무선모뎀을 이용한 RTK-GPS 전송 방법을 무선 LAN(Local Area Network) 환경에서 RTK-GPS 위치 정보 전송 방법에 대해서 제안하고, AGV 이동 위치 결정 및 계산을 실험하였다.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.352-353
• /
• 2008

국제표준화기구(ISO)에서는 장비에 대한 표준화작업을 ISO/TC172에서 관리하고 있으며 산하의 전문위원회인 SC6에 속해있는 ISO17123 $1{\sim}8$은 주로 측량장비의 정밀도를 참조할 때 인용되는 표준으로 그중에서 ISO17123-8: GNSS field measurement systems in real-time kinematic(RTK)은 GNSS의 RTK 정확도평가방법으로서 약식시험절차와 엄밀시험절차를 규정하고 있다. 본 연구에서는 ISO17123-8의 규격을 분석하고 이 규격에 따라 GPS RTK Test-bed를 시험구축하고 정확도 평가방법에 따라 관측값 Testing하는데 목적이 있다.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1513-1518
• /
• 1996

A force reflecting hand controller can be used to provide more realistic information to the operator of a teleoperation system such as kinesthetic feedback from a slave robot. In this paper, a new design concept of a force reflecting 6-DOF hand controller utilizing the kinematic structure of a Stewart Platform is presented. Based on the optimal design technique of a Stewart Platform, a force reflecting hand controller has been designed and constructed to verify the technical feasibility of proposed design concept. In order to provide an operator with kinesthetic feedback information, a force mapping algorithm based on a reciprocal product of screws has been introduced. Finally, the technical feasibility of the design concept has been demonstrated through some of experimental results of the device under virtual environment on a real-time graphic system.