• Journal of IKEEE
• /
• v.15 no.1
• /
• pp.104-112
• /
• 2011

During the ground operation of Korean army, the voice message is mainly used for exchanging informations related to the surveillance and reconnaissance, command and control, and precision strike. However, in order to the battlefield visualization among fighting powers participating in the ground force operation, automatic situational awareness and variable message format (VMF) for command and control are required. For securing core technologies necessary for the battlefield visualization, message standard and message handler are established through several applied researches. Besides, the VMF for equipping a weapon system is in development. In this paper, a study on the Korean variable message format (KVMF), where interoperability of integrated battle management system (BMS) is guaranteed due to performing joint, ground, and combined operations so that the situation awareness and strike system can be automated in almost real time, is presented. From the modeling and simulation (M&S) results of the message processor, delay time is varied in accordance with the number of nodes in unit platoon network, message length, and generation interval of routine messages. Therefore, it is shown that the system performance can be optimized by establishing proper network protocol for each situation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.4
• /
• pp.377-384
• /
• 2004

Nowadays, control systems consist of smart sensors, smart actuators, and controllers connected via fieldbus. Some devices such as motors in plant environments generate high degrees of EMI or noise. This noise may cause communication errors and make the successful transmission of data longer. Therefore, the noise condition has to be considered at the design of a reliable control system based on a network. This paper presents a scheduling method of task and message to guarantee the given end-to-end constraints under noise environments. A noise model with multi-sources of noise is used, and the analysis method of message's response time is presented when the noise model is applied to CAN (Controller Area Network). Two kinds of noise models are applied to an example system, and the effect to each control loop s end-to-end response time is analyzed. We believe that the proposed method help system designers design the control system guaranteeing its requirements under noise environment.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.1 no.1
• /
• pp.20-26
• /
• 2006

One of the computer application fields which started showing noticeable new growth trends in recent years is the real time communication distributed computing application field. Object -oriented(OO) real time(RT) distributed computing is a form of real-time distributed computing realized with a distributed computer system structured in the form of an object network. In this paper, we describes the application environment as the DHS (distributed high-precision simulation) with TMO structure. The TMO scheme is aimed for enabling a great reduction of the designer's effort in guaranteeing timely service capabilities of distributed computing application systems. It has been formulated from the beginning with the objective of enabling design-time guaranteeing of timely action. In the real time simulation techniques based on TMO object modeling, we have observed several advantages to the TMO structuring scheme. TMO object modeling has a strong traceability between requirement specification and design, cost-effective high-coverage validation, autonomous subsystems, easy maintenance and flexible framework for requirement specification.

• Journal of Communications and Networks
• /
• v.15 no.1
• /
• pp.87-101
• /
• 2013

In industrial applications, sensor networks have to satisfy specified time requirements of exchanged messages. IEEE 802.15.4 defines the communication protocol of the physical and medium access control layers for wireless sensor networks, which support real-time transmission through guaranteed time slots (GTSs). In order to improve the performance of IEEE 802.15.4 in industrial applications, this paper proposes a new traffic scheduling algorithm for GTS. This algorithm concentrates on time-critical industrial periodic messages and determines the values of network and node parameters for GTS. It guarantees real-time requirements of periodic messages for industrial automation systems up to the order of tens to hundreds of milliseconds depending on the traffic condition of the network system. A series of simulation results are obtained to examine the validity of the scheduling algorithm proposed in this study. The simulation results show that this scheduling algorithm not only guarantees real-time requirements for periodic message but also improves the scalability, bandwidth utilization, and energy efficiency of the network with a slight modification of the existing IEEE 802.15.4 protocol.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.3
• /
• pp.43-49
• /
• 2012

Personalized message syndication is an important process for maximizing the effect of mobile marketing. This paper proposes an algorithm for determining clients satisfying target conditions in real-time. The proxy server as an intermediate node stores client profiles (gender, age, location, etc) and their respective summaries into a database. When a company syndicates messages at run time, the proxy server maps target conditions expressed by boolean expressions to integer value and determines target clients by comparing target value with profile summary. Thus, this approach provides efficient personalized message syndication in very large systems with millions of clients because it can determine target clients in real-time and work with a traditional database easily.

• Journal of Information Technology Services
• /
• v.11 no.sup
• /
• pp.113-121
• /
• 2012

In this study, a real-time fall detection system based on a smartphone equipped with three-axis accelerometer and magnetometer was proposed and evaluated. The proposed system provides a service that detects falls in real time, triggers alarm sound, and sends emergency SMS(Short Message Service) if the alarm is not deactivated within a predefined time. When both of the acceleration magnitude and angle displacement of the smartphone attached to waist belt are greater than predefined thresholds, it is detected as a fall. The proposed system was evaluated against activities of daily living(walking, jogging, sitting down, standing up, ascending stairs, and descending stairs) and unintended falls induced by a proprietary pneumatic-powered mattress. With the thresholds of acceleration magnitude 1.7g and angle displacement $80^{\circ}$, it showed 96.5% accuracy to detect the falls while all the activities of daily living were not detected as fall.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.2
• /
• pp.19-27
• /
• 2012

Although message services in mobile environments provide real-time transfer of various contents such as text, multimedia and location, they can't provide dynamic message services based on analysis of message contents. This paper proposes "message as a service" concept and presents the design methodology for a message platform. The message in this paper is composed of the data part and template part which is in charge of view and functional logic of contents. In addition, two parts of a message are transferred separately. If a terminal device stores message templates, message platform can transfer data part only and thus network traffic can be reduced. Besides an efficient network utilization, we can dynamically update message view and its functional logic by modifying templates.

• Journal of Institute of Control, Robotics and Systems
• /
• v.16 no.10
• /
• pp.1018-1023
• /
• 2010

The CAN (Controller Area Network) system is the most dominant protocol for in-vehicle networking system because it provides bounded transmission delay among ECUs (Electronic Control Units) at data rates between 125Kbps and 1Mbps. And, many automotive companies have chosen the CAN protocol for their in-vehicle networking system such as chassis network system because of its excellent communication characteristics. However, the increasing number of ECUs and the need for more intelligent functions such as ADASs (Advanced Driver Assistance Systems) or IVISs (In-Vehicle Information Systems) require a network with more network capacity and the real-time QoS (Quality-of-Service). As one approach to enhancing the network capacity of a CAN system, this paper introduces a CAN system with dual communication channel. And, this paper presents a distributed message allocation method that allocates messages to the more appropriate channel using forecast traffic of each channel. Finally, an experimental testbed using commercial off-the-shelf microcontrollers with two CAN protocol controllers was used to demonstrate the feasibility of the CAN system with dual communication channel using the distributed message allocation method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.24 no.6
• /
• pp.43-53
• /
• 2019

In recent years, there have been many cases of damage to indoor air hazardous materials, and major damage due to the lack of quick action. In this regard, the system is intended to establish for sending push messages to the user's mobile when the concentration of hazardous substances is exceeded. This system extracts data with IoT system such as Arduino and Raspberry Pi and then constructs database through MongoDB and MySQL in cloud computing system. The database is imported through the application server using NodeJS and sent to the application for visualization. Also, when receiving signals about a dangerous situation in IoT system, push message is sent using Google FCM library. Mobile application is developed using Android Web view, and page to enter Web view is developed using HTML5 (HTML, Javascript CSS). The application of this system enables real-time monitoring of indoor air-dangerous substances. In addition, real-time information on indoor/outdoor detection location and concentration can be sent to the user's mobile in case of a risk situation, which can be expected to help the user respond quickly.

• Proceedings of the Korean Information Science Society Conference
• /
• 2008.06d
• /
• pp.291-296
• /
• 2008

Wireless network technologies are becoming more widely used in industrial environment. The industrial communication system requires a real-time delivery of messages. The sensors periodically senses the physical environment and wants to deliver the data in real-time to the sink. This paper proposes a real-time protocol for periodic messages on wireless sensor and actor networks to be used in industrial communications. The proposed protocol delivers the data message using the shortest path from the source and the nearest actor. The protocol considers the energy consumption by reducing the number of broadcast messages during flooding. We have evaluated the performance of the proposed protocol using QualNet simulator. The simulation results show that the data messages have been delivered in real-time and the number of broadcast messages is reduced from 90% to 35% compared the existing protocols.