• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.10
• /
• pp.1353-1358
• /
• 2021

IoT (Internet of Things) emerges from various technologies such as communications, micro processors and embedded system and so on. The IoT has also been used to UAV (Unmanned Aerial Vehicle) system. In manned aircraft, a pilot and co-pilot should control FCS (Flight Control System) with FBW(Fly By Wire) system for flight operation. In contrast, the flight operation in UAV system is remotely and fully managed by GCS (Ground Control System) almost in real time. To make it possible the communication channel should be necessary between the UAV and the GCS. There are many protocols between two systems. Amongst them, MAVLink (Macro Air Vehicle Link) protocol is representatively used due to its open architecture. MAVLink does not define any securities itself, which results in high vulnerability from external attacks. This paper proposes the method to enhance data security in GCS network by applying cryptographic methods to the MAVLink messages in order to support safe UAV operations.

• Journal of KIISE:Computing Practices and Letters
• /
• v.5 no.6
• /
• pp.700-707
• /
• 1999

본 논문에서는 GIS 관련 연산을 실시간에 효율적으로 처리하기 위한 분산공유메모리 기반 병렬처리 시스템을 제안한다. 본 논문의 분산공유메모리 시스템은 메시지전달 방식의 분산메모리 MIMD 컴퓨터 상에 소프트웨어 기반 분산공유메모리 모듈을 탑재함으로써 구현되었다. 또한 GIS 연산의 기본이 되는 공간 객체를 공유의 기본 단위로 설정하고, GIS 데이타의 특성을 반영하여 읽기전용 공유데이타 타입을 추가하였으며, 네트워크 오버헤드를 줄이기 위하여 복수의 객체를 한번에 읽어오는 bulk access가 가능하도록 하였다. 본 시스템에서는 GIS 데이타의 효율적인 분배를 위하여 부하균등화 기법으로 guided self scheduling을 사용하였다. 실험결과 본 시스템은 네트워크 캐쉬의 효율적인 활용을 통하여 소프트웨어 기반 분산메모리 시스템의 오버헤드에도 불구하고 MPI 기반 메시지전달 방식에 비하여 향상된 성능을 얻을 수 있었다.Abstract In this paper, we propose a distributed shared memory(DSM) based parallel processing system to process GIS related computations efficiently in real time. The system is based on a software DSM module implemented on top of a distributed MIMD computer. In the DSM system, spatial object, which is a fundamental structure to represent GIS data, is used as a basic unit for sharing, and a read-only shared data type is added to reflect the characteristics of GIS data. In addition, a bulk access to multiple shared data is made possible to reduce the network overhead. A guided self scheduling method is devised for efficient load balancing in distributing GIS data to parallel processors. The experimental results show that the DSM system performs better than an MPI based message-passing system through the efficient utilization of network cache in spite of the system's software overhead.

• Proceedings of the Korea Association of Information Systems Conference
• /
• 1997.10a
• /
• pp.113-125
• /
• 1997

The objective of this research is to construct and build a software platform to enable collaboration among enterprise headquarters, product designers, software engineers, manufacturing plants, and suppliers which are located at different remote locations via internet. In specific, agent technology is adopted as a software vehicle to automate demand as a software vehicle to automate demand and supply process in the internet environment. Agents are programs that act an behalf of their human users to perform laborious tasks such as information locating, accessing, filtering, integrating, adapting and resolving inconsistencies. Global competition is forcing the present day industry to produce high quality product more fast and inexpensively. In Korea, most labor-intensive industries have moved to China and other Asian countries for cost reduction. The need for fast information exchange has increased among the remote locations for the cooperation and coordination. In this research, a virtual global manufacturing system will be constructed that distributes production schedule among remote places, acts as a bridge between the headquarters and manufacturing plants, distributes tasks and collates different solutions between demand and supply using agent. The external communication protocol takes HTML format, internal message handling requires SGML for document exchange, and KQML for agent implementation. The expected benefits will be : reduced cost of real-time information exchange, realization of global manufacturing environment, the maximum utilization of internet for the enterprise data exchange.

• The Journal of Information Systems
• /
• v.6 no.2
• /
• pp.85-105
• /
• 1997

The objective of this research is to construct and build a software platform to enable collaboration among enterprise headquarters, product designers, software engineers, manufacturing plants, and suppliers which are locate at different remote locations via internet. In specific, agent technology is adopted as a software vehicle to automate demand and supply process in the internet environment. Agents are programs that act on behalf of their human users to perform laborious tasks such as information locating, accessing, filtering, integrating, adapting and resolving inconsistencies. Global competion is forcing the present day industry to produce high quality product more fast and inexpensively. In Korea, most labor-intensive industries have moved to China and other Asian countries for cost reduction. The need for fast information exchange has increased among the remote locations for the cooperation and coordination. In this research, a virtual global purchasing and ordering system will be constructured that distributes production schedule among remote places, acts as a bridge between the headquarters and manufacturing plants, distributes tasks and collates different solutions between demand and supply using agent. The external communication protocol takes HTML format, internal message handling requires SGML for document exchange, and KQML for agent implementation. The expected benefits will be : reduced cost of real-time information exchange, realization of global manufacturing environment, the maximum utilization of internet for the enterprise data exchange.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.3
• /
• pp.576-599
• /
• 2013

Protocol reverse engineering is useful for many security applications, including intelligent fuzzing, intrusion detection and fingerprint generation. Since manual reverse engineering is a time-consuming and tedious process, a number of automatic techniques have been proposed. However, the accuracy of these techniques is limited due to the complexity of binary instructions, and the derived formats have missed constraints that are critical for security applications. In this paper, we propose a new approach for protocol format extraction. Our approach reasons about only the evaluation behavior of a program on the input message from concolic execution, and enables field identification and constraint inference with high accuracy. Moreover, it performs binary analysis with low complexity by reducing modern instruction sets to BIL, a small, well-specified and architecture-independent language. We have implemented our approach into a system called Icefex and evaluated it over real-world implementations of DNS, eDonkey, FTP, HTTP and McAfee ePO protocols. Experimental results show that our approach is more accurate and effective at extracting protocol formats than other approaches.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.43-50
• /
• 2010

In this thesis, Traffic information which is provided to the VMS used a FM frequency and provides real-time traffic information about the mobile production unit system which designed and produced and a quality evaluated. Result of the research, we will be able to confirm converted audio and text information from traffic information is linked with VMS information, FM broadcast traffic information to motorists passing through it were found to be and as a result of this study, which sees raises the effectiveness of VMS users and using VMS to build low-cos transport infrastructure will be an opportunity.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.78.2-78.2
• /
• 2019

The temperature control of a scientific device is essential because extreme temperature conditions can cause hazard issues for the operation. We developed a software which can interact with the temperature sensor using the GMT SDK(Giant Magellan Telescope Software Development Kit) version 1.6.0. The temperature sensor interacts with the EtherCAT(Ethernet for Control Automation Technology) slave via the hardware adapter, sending and receiving data by a packet. The PDO(Process Data Object) and SDO(Service Data Object), which are the packet interacts with each EtherCAT slave, are defined on the TwinCAT program that enables the real-time control of the devices. The user can receive data from the device via grs(GMT Runtime System) tools and log service. Besides, we programmed the software to print an alert message on the log when the temperature condition changes to certain conditions.

• Journal of Service Research and Studies
• /
• v.5 no.2
• /
• pp.93-101
• /
• 2015

Today, various access security technology appeared in this society as a result of the informatization and automation. Most building, floor, or door security certification system for the office units are installed, but there are many inconvenient matters. In order to minimises this, we used the face recognition function via the camera, and various sensors. In this paper, I designed the access security system through physical computing which Arduino offered, facial recognition program, and Twitter. Check that the personal information stored in the individual RFID tag is matched to the personal information stored on the existing server. Face recognition program input the face using a camera, and allow to confirm the identity. The system's abnormal or when the unauthenticated person is to penetrate, the system transmits the Twitter status message to the manager. It was designed continuously to monitor the status in real time in this way.

• KIPS Transactions on Computer and Communication Systems
• /
• v.3 no.11
• /
• pp.403-408
• /
• 2014

In the Internet of Things(IoT) era, many of the things or objects that enclose our environments are able to associate with those things on the Internet. To construct IoT systems, it needs to consider a component for acquiring and aggregating of sensory data via things with sensors and instruments, which is connected by diverse networks, in IoT environment. An IoT system is intrinsically distributed in a variety of ways. In addition, to manage an IoT system efficiently, interoperability is needed to meet requirements while the IoT system is designed to deliver data among its applications. In this paper, a reference architecture based on asynchronous messaging is defined and used for designing an IoT system. To apply the architecture, we discuss how to manage data streams with real-time characteristics and make a prototype based on pipe-and-filter to produce and consume them by a pub/sub messaging system NaradaBrokering.

• The Journal of the Korea Contents Association
• /
• v.5 no.2
• /
• pp.257-266
• /
• 2005

As developing of the internet and computer technology, more interests are gathered to the conference service which provides capability of multi-party real-time visual conference. In this paper, we have designed and implemented a SIP-based visual conference system which includes Presence service. The elements of this conference system are user system, which has conference UA(User Agent) capability, presence seuer and conference server. For the presence service, we have adapted publication method which uses SIP PUBLISH message, and with this service various status informations of users are easily acquired. Also invitations and involvements to the conference are easily made through this service. For the conference server which controls establishment and management of multi-party connections, we have included conference event package. This package provides dynamically changing conference informations and users informations through SIP subscription and notification functions.