• 한국인터넷방송통신학회논문지
• /
• 제12권5호
• /
• pp.107-114
• /
• 2012

본 논문은 기존 블라인드 등화기의 성능인 수렴 특성과 잔류 부호간 간섭의 영향을 경감시키기 위해 축소 신호점을 사용하고 비용 함수를 실수부와 허수부로 분리하여 처리하는 한 이중 구조 CR-CMA(Constellation Reduction CMA)에 관한 것이다. 기존의 CMA는 진폭만을 보상하고 위상은 보상을 하지 못하며, 이를 해결하기 위해 MCMA(Modified CMA)는 비용 함수만을 실수부와 허수부를 따로 처리하여 진폭과 위상을 보상하지만 진폭의 보상 능력과 초기 수렴 속도에서는 CMA보다 성능이 열악해지는 문제점이 있다. 제안하는 이중 구조 CR-CMA는 CMA와 MCMA(Modified CMA) 알고리즘 장점만을 살릴 수 있도록 비용 함수와 오차 함수를 실수부와 허수부로 나누어 처리하고 축소 신호점을 적용할 수 있도록 개량하여 진폭과 위상의 보상, 빠른 수렴 속도 및 잔류 ISI와 MD(Maximum Distortion) 량의 감소 그리고 MSE(Mean Square Error)와 양호한 심볼 오류율 (SER : symbol error ratio) 특성을 얻을 수 있음을 컴퓨터 시뮬레이션으로 확인하였다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권12호
• /
• pp.637-644
• /
• 2004

This paper proposes an expert system with the knowledge learning capability which can enhance the safety and effectiveness of substation operation in the automated substation as well as existing substation by inferring multiple events such as main transformer fault, busbar fault and main transformer work schedule under multiple inference mode and multiple objective mode and by considering totally the switch status and the main transformer operating constraints. Especially inference mode includes the local minimum tree search method and pattern recognition method to enhance the performance of real-time bus reconfiguration strategy. The inference engine of the expert system consists of intuitive inferencing part and logical inferencing part. The intuitive inferencing part offers the control strategy corresponding to the event which is most similar to the real event by searching based on a minimum distance classification method of pattern recognition methods. On the other hand, logical inferencing part makes real-time control strategy using real-time mode(best-first search method) when the intuitive inferencing is failed. Also, it builds up a knowledge base or appends a new knowledge to the knowledge base using pattern learning function. The expert system has main transformer fault, main transformer maintenance work and bus fault processing function. It is implemented as computer language, Visual C++ which has a dynamic programming function for implementing of inference engine and a MFC function for implementing of MMI. Finally, it's accuracy and effectiveness is proved by several event simulation works for a typical substation.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2009년도 학술대회
• /
• pp.411-417
• /
• 2009

본 논문은 지능형 환경에 적합하도록 사용자의 자유를 제한하지 않는 실시간 신체 부위 추적 시스템의 구현에 관해 다룬다. 본 시스템은 기존의 신체 부위 추적 시스템과 달리 소매의 길이에 제약 없이 긴 소매, 반 소매 모두 인식할 수 있도록 함으로써 시스템의 generality를 높였다. 정확한 인식을 위하여, 한 대의 카메라에서 얻어진 이미지에서 손, 머리, 발의 신체 부위를 따로 검출하고 각 신체 부위를 검출할 때 해당 부위에 적합한 특징점을 따로 선택하여 검출하였다. 검출된 2차원의 신체 부위들을 calibrate된 카메라를 이용하여 3차원 자세로 변환하였다. 본 시스템은 실험을 통해 실시간(50fps) 성능으로 향상된 손 추적 성능을 보여주었다.

• 한국공작기계학회논문집
• /
• 제16권4호
• /
• pp.101-107
• /
• 2007

The objective of this research work is to investigate into effects of an auto tracking of the focal distance on the quality of the cut part in the cutting of a low carbon sheet using a high-power CW Nd:YAG laser. An auto-tracking system with a capacitance based distance control loop has been employed to perform a real control of the focal distance. In order to examine the influence of the auto-tracking of a focal distance on the optimum focal distance, the kerfwidth, surface roughness and the formation of the cut section, several linear cutting tests have been carried out using the auto-tracking system. The results of experiments have been shown that the optimum focal distance is 0.9mm. In addition, it has been shown that the variation of kerfwidth and the surface roughness of the cut part with control of the focal distance are reduced 40-80% and 30-55% in comparison with those of the cut part without tracking of the focal distance. From the results of the experiments, it has been found that the real time tracking of the focal distance can improve the part quality.

• 전기전자학회논문지
• /
• 제17권3호
• /
• pp.301-308
• /
• 2013

본 논문에서는 다중센서 기반의 하이브리드 조명제어 시스템을 제안한다. 제안된 하이브리드 조명제어 시스템은 가로등의 관리 및 제어를 위한 데이터 표시부와 데이터 변환 및 처리부, 게이트웨이의 통신부로 구성하여 설계한다. 데이터는 실시간으로 저장이 가능하도록 DB를 설계하고, 실시간으로 무선 원격제어 및 스케줄을 설정하여 모니터링 할 수 있도록 구현한다. 제안된 하이브리드 조명제어 시스템의 효율성 검증결과, 스마트 기기 및 포터블 PC 등과 연동하여 실시간 모니터링 및 원격 조명제어가 가능하였고, 결과적으로 에너지 절감 및 전기료 감소, 통신비용 감소 효과를 얻을 수 있었다.

• 한국정보처리학회논문지
• /
• 제7권6호
• /
• pp.1753-1765
• /
• 2000

As the areas of computer application are expanded, real-time application environments that must process as many transactions as possible within their deadlines, such as a stock transaction systems, ATM switching systems etc, have been increased recently. The reason why the conventional database systems can't process soft real-time applications is the lack of prediction and poor performance on processing transaction's deadline. If transactions want to access data stored at the secondary storage, they can not satisfy requirements of real-time applications because of the disk delay time. This paper designs a main-memory database prototype systems to be suitable to real-time applications and then this system can produce rapid results without disk i/o as all of the information are loaded in main memory database. In thesis proposed the improved techniques with respect to logging, checkpointing, and recovering in our environment. In order to improve the performance of the system, a) the frequency of log analysis and redo processing is reduced by the proposed redo technique at system failure, b) database consistency is maintained by improved fuzzy checkpointing. The performance model is proposed which consists of two parts. The first part evaluates log processing time for recovery and compares with other research activities. The second part examines checkpointing behavior.

• 한국자동차공학회논문집
• /
• 제17권1호
• /
• pp.169-175
• /
• 2009

Real-time multibody vehicle dynamics software has been developed for virtual handling tests. The software can be utilized for HILS(Hardware In the Loop Simulations) and consists of three modules such as a graphical vehicle modeling preprocessor, a real time dynamics solver, and a virtual reality graphic postprocessor for virtual handling tests. In the graphical vehicle modeling preprocessor, vehicle hard point data for a suspension model are automatically converted into multibody vehicle model. In the real time dynamics solver, the efficient subsystem synthesis method is used to create multibody equations of motion for a subsystem by a subsystem. In the virtual reality graphic postprocessor, an animator has been also developed by using Matlab Virtual Reality Toolbox for virtual handling tests.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1299-1302
• /
• 2004

A real object duplication system (RODS), including three dimensional (3D) scanner and solid freeform fabrication system (SFFS), is a device to make three-dimensional objects directly from the drawing or photo data. A Selective Multi-Laser Sintering (SMLS) process designed in this paper is by which computer images received using 3D scanner are built up from polymer powder on building room of large size using dual laser at industrial type SFF system. Using the process can rapidly produce real object duplication components of industrial type such as cylinder, engine block, chassis of automobile, etc. In this paper, the industrial type SFF system using SMLS process is manufactured and the system is satisfied with high precision and high speed processing technique. To research characteristics of each part for theindustrial type SFF system, a structure and thermal analysis and test of each part is carried out. Also, to achievement of high performance for industrial type SFF system, design and fabrication for the structure, heater, nitrogen supply, laser and control part are carried out.

• 전기전자학회논문지
• /
• 제17권4호
• /
• pp.550-558
• /
• 2013

본 논문에서는 다중 프로토콜 기반의 효율적인 하이브리드 조명관리 시스템 구현을 제안한다. 제안된 하이브리드 조명관리 시스템은 조명기기의 관리 및 제어를 위한 데이터 표시부와 데이터 변환 및 처리부, 게이트웨이의 통신부로 구성하여 설계하였다. 데이터는 실시간으로 저장이 가능하도록 DB를 설계하였고, 실시간 무선 원격제어 및 스케줄을 설정하여 관리하도록 구현하였다. 본 논문에서 제안된 효율적인 하이브리드 조명관리 시스템의 효율성 검증결과, 스마트 기기 및 포터블 PC 등과 연동하여 실시간 모니터링 및 원격 조명제어가 가능하였고, 결과적으로 에너지 절감 및 전기료 감소, 통신비용 감소 효과를 얻을 수 있었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권7호
• /
• pp.265-272
• /
• 2006

This paper describes a method of parameter estimation of time series data using discrete Fourier transform(DFT). DFT have been mainly used to precisely and rapidly obtain the frequency of a signal. In a dynamic system, a real part of a mode used to learn damping characteristics is a more important factor than the frequency of the mode. The parameter estimation method of this paper can directly estimate modes and parameters, indicating the characteristics of a dynamic system, on the basis of the Fourier transform of the time series data. Real part of a mode estimates by subtracting a frequency of the Fourier spectrum corresponding to 0.707 of a magnitude of the peak spectrum from a peak frequency, or subtracting a frequency of the power spectrum corresponding to 0.5 of the peak power spectrum from a peak frequency, or comparing the Fourier(power) spectrum ratio. Also, the residue and phase of time signal calculate by simple equation with the real part of the mode and the power spectrum that have been calculated. Accordingly, the proposed algorithm is advantageous in that it can estimate parameters of the system through a single DFT without repeatedly calculating a DFT, thus shortening the time required to estimate the parameters.