• Title/Summary/Keyword: Real Time Traffic Signal Control

Search Result 81, Processing Time 0.03 seconds

A Study on the Fault Signal Process of Hierarchical Distributed Structure for Highway Maintenance systems using neural Network (신경회로망을 이용한 분산계층 구조용 도로 유지관리설비의 고장정보처리에 관한 연구)

  • 류승기;문학룡;홍규장;최도혁;한태환;유정웅
    • Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
    • /
    • v.13 no.1
    • /
    • pp.69-76
    • /
    • 1999
  • This paper proposed a design of intelligent supervisory control systems for maintenance of highway traffic information equiprrent and processing algorithm of equiprrent fault data. The fault data of highway traffic equipment are transmitted from rerrnte supervisory controller to central supervisory system by real time, the transmitted fault data are anaIyzed the characteristic using evaluation algorithm of fault data in central supervisory system. The evaluation algorithm includes a neural network and fault knowlOOge-base for processing the multi-generated fault data. For validating the evaluation algorithm of intelligent supervisory control systems, the rrethod of analysis used to the five pattern of binary signal by transmitted real time and the opTclting user-interface constructed in central supervisory system.

  • PDF

A Traffic congestion judgement Algorithm development for signal control using taxi gps data (택시 GPS데이터를 활용한 신호제어용 혼잡상황 판단 알고리즘 개발)

  • Lee, Choul Ki;Lee, Sang Deok;Lee, Yong Ju;Lee, Seung Jun
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.3
    • /
    • pp.52-59
    • /
    • 2016
  • COSMOS system which was developed in Seoul for real-time signal control was designed to judge traffic condition for practicing signal operation. However, it occurs efficiency problem that stop line detection and queue length detection could not judge overflow saturation of street. For that reason, following research process GPS data of Seoul city's corporationowned taxi to calculate travel speed that excluded existing system of stop line detection and queue length detection. Also, "Research of calculating queue length by GPS data" which was progressed with following research expressed queue length. It is based on establishing algorithm of judging congestion situation. The algorithm was applied to a few areas where appeared congestion situation consistently to confirm real time traffic condition with established network. [Entrance of the National Sport Institute ${\rightarrow}$ Gangnam station Intersection, Yuksam station intersection ${\rightarrow}$ National Sport Institute.

Optimal Traffic Signal Control Using an Efficient Dynamic Programming (효율적인 동적계획법을 이용한 최적 교통 신호제어)

  • Park, Yun-Sun;Kim, Chang-Ouk
    • Journal of Korean Institute of Industrial Engineers
    • /
    • v.26 no.4
    • /
    • pp.315-324
    • /
    • 2000
  • This paper presents an efficient dynamic programming(DP) method, so called EDPAS (Efficient Dynamic Programming Algorithm for Signal), for optimally controlling traffic signal in real-time mode at a single intersection. The objective of EDPAS is to minimize total vehicle delay. It applies reaching method to solve forward DP functional equation, which does not need any priori knowledge on the states of DP network. Two acceleration techniques within reaching method are the main feature of EDPAS. They are devised to eliminate inferior DP states by comparing between states and maintaining incumbent value, resulting in a great amount of computational efficiency. An example is shown to verify the advantage of EDPAS.

  • PDF

A Fusion Priority Signal Control Algorithm for Emergency Vehicles (긴급차량 융합형 우선신호 제어 알고리즘 개발)

  • Lee, Soong-bong;Lee, Jin-soo;Jang, Jae-min;Lee, Young-Ihn
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.17 no.2
    • /
    • pp.113-127
    • /
    • 2018
  • This study develops a fusion priority signal control algorithm to pass without delay in emergency events. Fusion priority signal control is method combined center control with local control. The center control method applies signal times for each signalized intersection on the emergency vehicle's route when an emergency call is received. As signals are controlled before the emergency vehicle leaves for its destination, it is possible to clear the queues at each intersection more effectively. However, since the traffic information (speed, position) of the real-time emergency vehicle is not used, the intersection arrival time predicted by center control and actual arrival time of the emergency vehicle may be different from each other. In the case, it is possible to experience a delay caused by the signal. Local control method operate priority signal use the real-time information of EV, but there is a limitation that queue elimination time can not be reflected. In this study, fusion(center+local) control algorithm is proposed to compensate the disadvantages of center and local control also maximizing its advantages. Proposed algorithm is expected to decrease delay time of EV in emergency situation.

Establishment and Effectiveness Analysis of Emergency Vehicle Priority Signal Control System in Smart City and Directions for ISMS-P Technical Control Item Improvement (스마트시티 내 긴급차량 우선신호 제어시스템 구축과 효과성 분석 및 ISMS-P 기술적 통제항목 개선 방향성 연구)

  • Yoon, TaeSeok;Park, Yongsuk
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.25 no.9
    • /
    • pp.1166-1175
    • /
    • 2021
  • We investigate the current situation and development trend of domestic smart city and emergency vehicle priority signal control system analyzing the existing effectiveness of 1) emergency vehicle priority signal control system and 2) control emergency vehicle priority signal, based on domestic and foreign prior research for signal control system security. The effectiveness of time reduction was analyzed through actual application and test operation to emergency vehicles after establishing the system. In addition, for security management and stable service of real-time signal system control we propose improvement for the technical control items of the ISMS-P certification system to secure golden time to protect citizens' precious lives and property in case of emergency by classifying and mapping the existing ISMS-P certification system and the Korea Internet & Security Agency's cyber security guide according to the items of security threats.

A Microscopic Traffic Simulation Model for Urban Network Performance Evaluation (도시 가로망시설 운영효율평가를 위한 모의실험 모형개발)

  • 하동익;오영태;정준하
    • Journal of Korean Society of Transportation
    • /
    • v.13 no.1
    • /
    • pp.185-203
    • /
    • 1995
  • The purpose of this paper is to develop a microscopic traffic simulation model which is able to both analyze and the evaluate signlaized urban network and to verify its usefulness in comparison with the other model which has alfeady been released. This simulation model adopts the General Motor's 5th model for car-following and introduces an unique lanechanging rule using acceptable gap. It analyzes single and dual-ring signal phases and generates detector information . So it could be applied to dynamic route guidance systems as wel as real time signal control systems. The results derived from Netsim and the observed data from the real network have been used to test the validit of the proposed model. The result of the test has shown that there are no significant differences between the NETSIM model and the proposed model in estimating travel speed and stopped delay. In optimum offset estimatin , it has shown the same results with NETSIM. the measure of effectiveness , however, derived from this model is slightly better than that of the real network situation. This may be due to the fact that the proposed model does not take into account side frictions from interferences and obstacles.

  • PDF

퍼지이론을 이용한 유고감지 알고리즘

  • 이시복
    • Proceedings of the KOR-KST Conference
    • /
    • 1995.12a
    • /
    • pp.77-107
    • /
    • 1995
  • This paper documents the development of a fuzzy logic based incident detection model for urban diamond interchanges. Research in incident detection for intersections and arterials is at a very initial stage. Existing algorithms are still far from being robust in dealing with the difficulties related with data availability and the multi-dimensional nature of the incident detection problem. The purpose of this study is to develop a new real-time incident detection model for urban diamond interchanges. The development of the algorithm is based on fuzzy logic. The incident detection model developed through this research is capable of detecting lane¬blocking incidents when their effects are manifested by certain patterns of deterioration in traffic conditions and, thereby, adjustments in signal control strategies are required. The model overcomes the boundary condition problem inherent in conventional threshold-based concepts. The model captures system-wide incident effects utilizing multiple measures for more accurate and reliable detection, and serves as a component module of a real-time traffic adaptive diamond interchange control system. The model is designed to be readily scalable and expandable for larger systems of arterial streets. The prototype incident detection model was applied to an actual diamond interchange to investigate its performance. A simulation study was performed to evaluate the model's performance in terms of detection rate, false alarm rate, and mean time to detect. The model's performance was encouraging, and the fuzzy logic based approach to incident detection is promising.

  • PDF

Study on Queue Length Estimation using GPS Trajectory Data (GPS 데이터를 이용한 대기행렬길이 산출에 관한 연구)

  • Lee, Yong-Ju;Hwang, Jae-Seong;Lee, Choul-Ki
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.15 no.3
    • /
    • pp.45-51
    • /
    • 2016
  • Existing real-time signal control system was brought up typical problems which are supersaturated condition, point detection system and loop detection system. For that reason, the next generation signal control system of advanced form is required. Following thesis aimed at calculating queue length for the next generation signal control system to utilize basic parameter of signal control in crossing queue instead of the volume of real-time through traffic. Overflow saturated condition which was appeared as limit of existing system was focused to set-up range. Real-time location information of individual vehicle which is collected by GPS data. It converted into the coordinate to apply shock wave model with an linear equation that is extracted by regression model applied by a least square. Through the calculated queue length and link length by contrast, If queue length exceed the link, queue of downstream intersection is included as queue length that upstream queue vehicle is judeged as affecting downstream intersection. In result of operating correlation analysis among link travel time to judge confidence of extracted queue length, Both of links were shown over 0.9 values. It is appeared that both of links are highly correlated. Following research is significant using real-time data to calculate queue length and contributing to signal control system.

LOS Analysis Frame for COSMOS at Isolated Intersections (실시간신호제어 독립교차로 서비스수준 분석 방법론)

  • Kim, Jin-Tae;Kim, Kang-Huy;Lee, Don-Ju
    • Journal of Korean Society of Transportation
    • /
    • v.26 no.4
    • /
    • pp.161-172
    • /
    • 2008
  • The level of service (LOS) evaluation method of the Highway Capacity Manual (HCM) is limited to intersections with pre-timed signal operation, while advanced real-time traffic control systems have been expending in the field. This paper proposes a preliminary framework for LOS analysis at isolated intersections controlled by COSMOS, the real-time traffic control systems robustly utilizing the degree of saturation as basic inputs. The proposed LOS evaluation framework was devised with a pilot model developed to estimate the average cycle length and green times of COSMOS. The validation test showed that the proposed framework was able to accurately project the LOS, which was separately evaluated based upon field data.

A study of signal control with COSMOS on National Highway (신신호시스템(COSMOS)의 일반국도 적용에 대한 연구)

  • Baek Hyon-Su;Kim Young-Chan;Moon Hak-Yong;Kim Jong-Sik
    • The Journal of The Korea Institute of Intelligent Transport Systems
    • /
    • v.3 no.2 s.5
    • /
    • pp.29-40
    • /
    • 2004
  • The performance of the National Highway is raised, but the capacity of the signalized intersection on the National Highway is low. It's operated by TOD(Time Of Day) mode. To evaluate of the performance of COSMOS(Cycle, Offset, Split Model for Seoul), a real time traffic adaptive signal control system, on the National Highway, studied volume, travel time and queuing length at TOD control and TRC(Traffic responsive Control). Consequently, the average travel speed at TRC is high $2.9\~16.7$km/h then the average travel speed at TOD control. And te queuing length at TRC is low $15\~196m$ then the queuing length at TOD control.

  • PDF