• Journal of IKEEE
• /
• v.22 no.4
• /
• pp.953-958
• /
• 2018

In this study, a portable detection system was developed that can detect harmful gas and signals simultaneously in an enclosed space of industrial sites and underground facilities. The developed system is a sensor module for gas detection, a patch type 1 channel small ECG sensor, a module for three-axial acceleration detection sensor, and a system for statistics. In order to verify the performance of the system modules, the digital resolution, signal frequency, output voltage, and ultra-small modules were evaluated. As a result of the performance of the developed system, the digital resolution was 300 (rps) and the signal amplification gain was 500 dB or more, and the ECG module was manufactured with $50mm{\times}10mm{\times}10mm$ to increase patch utilization. It is believed that the product of this research will be valuable if it is used as an IoT-based management system for real-time monitoring of industrial workers.

• Proceedings of the KIEE Conference
• /
• 2003.11b
• /
• pp.91-94
• /
• 2003

In this paper, we achieve implementation of a Time-Frequency Domain Reflectometry(TFDR) system through comparatively low performance(100MS/s) PCI extensions for Instrumentation(PXI). The TFDR is the general methodology of Time Domain Reflectometry(TDR) and Frequency Domain Reflectometry(FDR). This methodology is robust in Gaussian noises, because the fixed frequency bandwidth is used. Moreover, the methodology can get more information of the fault by using the normalized time-frequency cross correlation function. The Arbitrary Waveform Generator(AWG) module generates the input signal, and the digital oscilloscope module acquires the input and reflected signals, while PXI controller module performs the control of the total PXI modules and execution of the main algorithm. The maximum range of measurement and the blind spot are calculated according ta variations of time duration and frequency bandwidth. On the basis of above calculations, the algorithm and the design of input signals used in the TFDR system are verified by real experiments. The correlation function is added to the TDR methodology for reduction of the blind spot in the TFDR system.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.146-148
• /
• 2007

CMDPS (COMS Meteorological Data Processing System) is the operational meteorological products extraction system for data observed from COMS (Communication, Ocean and Meteorological Satellite) meteorological imager. CMDPS baseline products consist of 16 parameters including cloud information, water vapor products, surface information, environmental products and atmospheric motion vector. Additionally, CMDPS includes the function of calibration monitoring, and validation mechanism of the baseline products. The main objective of CMDPS validation module development is near-real time monitoring for the accuracy and reliability of the whole CMDPS products. Also, its long time validation statistics are used for upgrade of CMDPS such as algorithm parameter tuning and retrieval algorithm modification. This paper introduces the preliminary design on CMDPS validation module.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.30 no.4
• /
• pp.133-140
• /
• 2007

This study aims to design and implement a learning evaluation system using .NET which is developed by Microsoft. .NET technology supports higher processing speed than ASP technology. The learning evaluation system is based on the web, consists of administrator module, questioner module and student module. The functions of the system, i.e., providing test questions, performing test, and evaluating result of test are achieving on the web in real time. Even when many users use this system, the system is stable and has a speed response time.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.19-31
• /
• 2013

It is well known that the accident of vehicles carrying hazardous materials incurs huge losses economically and socially. To detect and respond rapidly against the accident of a vehicle carrying hazardous materials, it is essential to estimate the relative navigation information between the forward tractor module and the backward trailer module of the vehicle reliably and accurately. In this paper, a precise relative positioning system based on GPS is designed, implemented, and evaluated as a prerequisite to design an effective relative navigation system for the vehicle carrying hazardous materials. An experiment using field-collected 10 Hz real GPS measurements showed that the designed relative positioning system achieves 22 cm accuracy within 15 epochs by float solutions. Also, it was found that cm-level integer solutions can be generated reliably after the quick convergence of float solutions.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.30B no.9
• /
• pp.9-17
• /
• 1993

There are multiple controllers (PLC. LOOP Controller ) which are operating in product line and fabrication line. In those lines, it is necessary to connect various multilple controllers with integrity and coordination. The ways to connect those devices are specified by ISO network standard. In this paper, real time network is designed and implemented for factory automation at lowest possible cost that meets the small and middle size MINI-MAP specifications. Network performance is evaluated by simulation method on data link layer implemented interfacing modules has efficiency in throughput by reducing processing time. The system designed in this paper can be also applied to the field of distributed systems for real time processing.

• Journal of the Korea Society of Computer and Information
• /
• v.21 no.6
• /
• pp.1-7
• /
• 2016

An uninterruptible power supply (UPS) allows small companies and domestic users to cope with power outages; but existing designs lack flexibility of control and require expensive battery maintenance, with a cost proportional to the outage compensation time. We combine a compact synchronous generator with a battery, with 10% of the capacity that would otherwise be required, to obtain a UPS with reduced maintenance costs for the same performance. Any UPS must respond immediately to a power loss, and our uninterruptible generator supply (UGS) is therefore built around real-time scheduling of its internal operations; this also makes it suitable for integration into the industrial gateway. The UGS is based on a real-time operating system, with an integrated wireless module providing connectivity to a web server, for monitoring and management, which can be performed remotely on a mobile device.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.947-950
• /
• 2001

This paper implements H.263 codec using SIMD(single instruction multiple data) method in real time based on PC. This system uses INS algorithm previously proposed by the authors as motion estimation module. SIMD method is used in DCT, IDCT, quantization, motion estimation, and display module. The developed algorithms are implemented using TMN5. Using the above algorithm, H.263 Codec can communicate more than 15 frames/sec in CIF resolution on a Pentium-IV 1.7GHz computer.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.383-386
• /
• 1986

In this paper, ultrasonic range finding module for the self-contained robot, INHAE-1, is presented. This system is processed, using Z-80 microprocessor, a much of information on the surrounding condition in real time and is realted a sensor for many side data acqusition with a stepping motor. Also this system can obtain the more correct edge of the obstacle using the standard deviation of the least-square method. In this experiment, it gives more correct information to mobile robot of the blind guidance and improves the orientation of the robot path.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.4
• /
• pp.424-434
• /
• 2015

Adaptive beamforming algorithms have been widely used to remove interference and jamming in the phased array radar system. Advances in the field programmable gate array(FPGA) technology now make possible the real time processing of adaptive beamforming (ABF) algorithm. In this paper, the FPGA based real-time implementation method of adaptive beamforming system(beamformer) in the pre-processor module for active electronically scanned array(AESA) radar is proposed. A compact FPGA-based adaptive beamformer is developed using commercial off the shelf(COTS) FPGA board with communication via OpenVPX(Virtual Path Cross-connect) backplane. This beamformer comprises a number of high speed complex processing including QR decomposition & back substitution for matrix inversion and complex vector/matrix calculations. The implemented result shows that the adaptive beamforming patterns through FPGA correspond with results of simulation through Matlab. And also confirms the possibility of application in AESA radar due to the real time processing of ABF algorithm through FPGA.