• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.7
• /
• pp.2603-2609
• /
• 2010

Currently at port, various trials about the improvement of operating method for raising operation efficiency of transferring equipment are made, but if the delay is occurred to quay crane due to individual team method in YT operation, the problem which even arranged YT should stop the work. Therefore, this study installed wireless location determining device within yard and measured the location of YT with real-time. Also, in order to raise the location determination effect, we converted operating method into pooling operation method and arranged YT. Through this study, we can trace the movement of YT with real-time and the work control method which anlayzes and evaluates congestion of yard objectively is prepared.

• ETRI Journal
• /
• v.33 no.4
• /
• pp.528-536
• /
• 2011

In this paper, we analyze the location accuracy of real-time locating systems (RTLSs) in multipath environments in which the RTLSs comply with the ISO/IEC 24730-2 international standard. To analyze the location error of RTLS in multipath environments, we consider a direct path and indirect path, in which time and phase are delayed, and also white Gaussian noise is added. The location error depends strongly on both the noise level and phase difference under a low signal-to-noise ratio (SNR) regime, but only on the noise level under a high SNR regime. The phase difference effect can be minimized by matching it to the time delay difference at a ratio of 180 degrees per 1 chip time delay (Tc). At a relatively high SNR of 10 dB, a location error of less than 3 m is expected at any phase and time delay value of an indirect signal. At a low SNR regime, the location error range increases to 8.1 m at a 0.5 Tc, and to 7.3 m at a 1.5 Tc. However, if the correlation energy is accumulated for an 8-bit period, the location error can be reduced to 3.9 m and 2.5 m, respectively.

• Journal of Korea Multimedia Society
• /
• v.9 no.4
• /
• pp.388-400
• /
• 2006

There are wireless location acquisition technique, LBS platform technique, and LBS application technique in the important technical elements of the LBS. In this paper, we design a location data management system which is the core base technique of the important technical elements of the LBS. The proposed system consist of an application interface of LBS, a query processor of application. service, a location estimator of the moving objects, a location information manager, a real-time data receiver, and a database of location data. This system manages efficiently the location change information of the moving objects using the database technique, suggests some useful inform to the users of LBS, and supports operation and facility of location estimation to process continuous location data of the moving objects. On the basis of location data triggering, this system supplements the problem of the related location data management systems to complement the loss of location data in the environment of real-time.

• Journal of the Korea Computer Industry Society
• /
• v.4 no.12
• /
• pp.986-998
• /
• 2003

A moving object management system manages spatiotemporal data o( moving objects which change their location continuously over time such as people, animals, cars, cellular phones, and so on. This system can be applied to location based services such as vehicle tracking systems, digital battlefields, and animal habitat management. The existing systems neither suggest location estimation of the moving objects nor handle the loss data of the moving objects in real-time environment. Thus the existing systems have problems that they give the uncertain results of the query processing to the user query. In this paper, we design a new moving object management system. The proposed system processes the past and future location information of the moving objects by the location change function. Also we propose a location triggering method, which supplements loss of the location data of the mobile objects in real-time environment. Finally, we implement and apply the proposed system to a vehicle tracking system based on PDA. Thus we ascertain that the proposed system can be applied to the location based system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.5
• /
• pp.281-290
• /
• 2014

The real-time data dissemination schemes exploit the spatiotemporal commuication approach which forwards data at the delivery speed calculated with the desired time deadline and the end-to-end distance in wireless sensor networks (WSNs). In practical environments, however, the performance of the real-time data dissemination might be degraded by additional and inevitable delay due to some holes. Namely, the holes lengthen the data delivery path and the spatiotemporal approach could not estimate a distance of the data delivery path. To deal with this, we propose A Hole Self-Organization Real-time Routing Protocol for Irregular Wireless Sensor Networks. In proposed protocol, nodes around holes could detect them at deploying phase. A hole is represented as a circle with center point and radius. This hole information is processed and provided as a form of location service. When a source queries a destination location, location provider replies certain points for avoiding holes as well as destination location. Thus, the source could set desired speed toward the destination via the points. Performance evaluation shows that provides better real-time service in practical environments.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.49 no.12
• /
• pp.608-613
• /
• 2000

This paper describes a fault location technique using wavelets in underground transmission power cable system. Estimation of fault location is performed using data smapled at two ends underground system. In the case of 50% fault of total underground transmission line, fault location is calculated using sampled single-end data in underground transmission line. Traveling wave is utilized in capturing the travel time of the transients along the monitored lines between the relay and the fault point. This traveling time information is provided by the wavelet. Simulation was performed using EMTP, ATP Draw and MATLAB. The results of fault location shown in this paper will be evaluated as an effective suggestion for fault location in real underground transmission line.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.12
• /
• pp.87-98
• /
• 1999

This study is concentrated on the development of real-time estimation model and vision control method as well as the experimental test. The proposed method permits a kind of adaptability not otherwise available in that the relationship between the camera-space location of manipulable visual cues and the vector of manipulator joint coordinates is estimate in real time. This is done based on a estimation model ta\hat generalizes known manipulator kinematics to accommodate unknown relative camera position and orientation as well as uncertainty of manipulator. This vision control method is roboust and reliable, which overcomes the difficulties of the conventional research such as precise calibration of the vision sensor, exact kinematic modeling of the manipulator, and correct knowledge of position and orientation of CCD camera with respect to the manipulator base. Finally, evidence of the ability of real-time vision control method for manipulator's position control is provided by performing the thin-rod placement in space with 2 cues test model which is completed without a prior knowledge of camera or manipulator positions. This feature opens the door to a range of applications of manipulation, including a mobile manipulator with stationary cameras tracking and providing information for control of the manipulator event.

• 한국HCI학회:학술대회논문집
• /
• 2007.02b
• /
• pp.504-511
• /
• 2007

Webcasting which is the integration of broadcasting and communications, is a prominent service which has changed to involve bi-directional interactions between a user and a system from uni-directional communication. However almost webcasting are operating by uni-direction between living and recording currently so learners have to hear and watch a contents without their suggestion. Therefore learners can not get interaction and feedback that it may be obtain on face to face class, instructor can not ensure concentration and location of student in webcasting. This paper presents a design and development of the webcasting system based on real-time interaction which provides an environment of real-time communication between casting and learner, a fixing of students' location in order to raise a fidelity and a concentration.

• Journal of Distribution Science
• /
• v.17 no.6
• /
• pp.77-84
• /
• 2019

Purpose - Although an extensive body of research in psychology and marketing focuses on perceived waiting time, no research has examined the effect of the location of the waiting place on perceived waiting time. In particular, this study suggests that customers who are waiting in a restaurant may have different perceived waiting time depending on whether they are in close proximity to the service area (e.g., dining area) or farther from it. In particular, the author examines how and why the location of the waiting place affects the perceived waiting time of the consumer and reveals the mental simulation as its psychological mechanism. Research design, data, and methodology - This study conducted field surveys with customers waiting in real restaurants. Eighty-eight people participated under two conditions: a restaurant with a waiting place near the dining area and a restaurant with a waiting place far from the dining area. Participants responded to questions about perceived waiting time (the dependent variable), mental simulation (the mediator), and demographic variables. To verify the hypothesis, ANOVA and bootstrapping analysis were performed. Results - The major results from the field study are as follows. First, participants perceived wait time differently depending on the location of the restaurant's waiting place: participants in the restaurant with a waiting place close to the dining area perceived significantly shorter waiting times. Second, the effect of the location of the waiting place on the perceived waiting time was mediated by mental simulation: the closer the wait location is to the dining area, the more imagination the customer exercises about the meal, which in turn distracts attention from time flow and shortens the perceived wait time. Conclusion - This study has a theoretical implication in that it extends research on perceived waiting time as the first study of how and why the location of a waiting place affects a customer's perceived waiting time. It has a practical implication that can be used as a marketing tactics to improve the image of the service provider by changing the location of the waiting place.

• Spatial Information Research
• /
• v.10 no.4
• /
• pp.567-578
• /
• 2002

The success of gCRM depends on the availability of adequate, real-time data about customers' location and the provision of diverse value-added services utilizing it. In the existing gCRM systems, however, it seems that the positional precision of customers' location is very low, and further that the services based on real-time location data are not provided. In order to overcome these weaknesses and extend the limited scope of gCRM, we suggest a new design of gCRM system integrated with LBS. We also describe in some detail the system prototype for such an integration.