• Journal of Korean Society of Environmental Engineers
• /
• v.27 no.12
• /
• pp.1249-1256
• /
• 2005

This study was performed to investigate the efficiency of the corrosion prevention in the simulated distribution system using CCPP(Calcium Carbonate Precipitation Potential) as the anti-corrosive index by adjusting pH, total dissolved solids, alkalinity and calcium hardness in the water treatment pilot process. The materials of the simulated distribution system(SDS) were equiped with same materials of real field water distribution system. CCPP concentrations controlled by $Ca(OH)_2$, $CO_2$ gas and $Na_2CO_3$ in the simulated distribution system and uncontrolled by the chemicals in the general water distribution system were average 0.61 mg/L and -7.77 mg/L. The concentrations of heavy metals like Fe, Zn, Cu ions in effluent water of the simulated distribution system controlled with water quality were decreased rather than the general water distribution system uncontrolled with water quality. In simulated distribution system(SDS), corrosion prevention film formed by CCPP control was observed that scale was come into forming six months later and it was formed into density as time goes on. We were analyzed XRD(X-ray diffraction) for investigating component of crystal compounds and structure for galvanized steel pipe(15 mm). Finding on analysis, scale was compounded to $Zn_4CO_3(OH)_6{\cdot}H_2O$ (Zinc Carbonate Hydroxide Hydrate) after ten months late, and it was compounded on $CaCO_3$(Calcium Carbonate) and $ZnCO_3$(Smithsonite) after nineteen months later.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2010

A nuclear plant ESF ACS simulator was designed, built, and verified to perform experiment related to ESF ACS of nuclear power plants. The dimension of 3D CAD model was based on drawings of the main control room(MCR) of Yonggwang units 5 and 6. The CFD analysis was performed based on the measurement of the actual flow rate of ESF ACS. The air flowing in ACS was assumed to have $30^{\circ}C$ and uniform flow. The flow rate across the HEPA filter was estimated to be 1.83 m/s based on the MCR ACS flow rate of 12,986 CFM and HEPA filter area of 9 filters having effective area of $610{\times}610mm^2$ each. When MCR ACS was modeled, air flow blocking filter frames were considered for better simulation of the real ACS. In CFD analysis, the air flow rate in the lower part of the active carbon adsorber was simulated separately at higher than 7 m/s to reflect the measured value of 8 m/s. Through the CFD analyses of the ACSes of fuel building emergency ventilation system, emergency core cooling system equipment room ventilation cleanup system, it was confirmed that all three EFS ACSes can be simulated by controlling the flow rate of the simulator. After the CFD analysis, the simulator was built in nuclear grade and its reliability was verified through air flow distribution tests before it was used in main tests. The verification result showed that distribution of the internal flow was uniform except near the filter frames when medium filter was installed. The simulator was used in the tests to confirm the revised contents in Reg. Guide 1.52 (Rev. 3).

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.33 no.1
• /
• pp.65-75
• /
• 2015

The findings of basic study on the awareness of falls in terms of Gwanpokdo(Paintings of Viewing Falls) were drawn as follows. First, there is a difference in an esthetic sense that water brings depending on the ratio of falls, and Gwanpokdo(Fall Landscape) in which falls take up more than 20% of the canvas focuses more on falls so that it brings about the awareness of landscape through direct communication with nature. Second, the diagonal composition of the canvas has symmetry between falls and a person viewing the falls, which makes view point even clear. In addition, margins of the canvas were missing due to the effect of True-View Landscape Painting during the late Joseon Dynasty, and overall composition of using the entire canvas became popular. This overall composition is stable and disposed with lopsided composition, so this heightens sense of balance and the meaning of falls. Third, Gwanpokdo(Paintings of Viewing Falls) of Josoen Dynasty showed various types of viewing falls in distant view, but as the distance between falls and persons got closer in the latter part of Joseon Dynasty, falls were no longer utopia but it expressed a sense of beauty and aesthetic contemplation through direct communication with real nature. Fourth, Gwanpokdo(Paintings of Viewing Falls) of Joseon Dynast had many drawings of a person viewing falls and viewing behaviors such as Supyeong gyeong(level landscape), Amgang gyeong(lower landscape), Bugam Gyeong(higher landscape), and glimpse viewing. Fifth, rocks out of landscape elements make falls vivid and are so expressed as yin and yang that falls and rocks are well contrasted with each other, maximizing beautiful scenery of falls. Sixth, woody plant of Gwanpokdo(Paintings of Viewing Falls) was mostly pine trees which symbolized the literati's fidelity and integrity at that time and emphasized the firm meaning of transcending the nature, matching with symbolization of falls.

• Korean Journal of Soil Science and Fertilizer
• /
• v.34 no.5
• /
• pp.316-325
• /
• 2001

To develope a technique for efficiently managing fertilizer for cucumber, a quick test method to quantify nitrate content in soil solution and leaf petiole juice using a simple instrument was investigated. Among the nitrate analyzing instruments such as compact ion meter, nitrate ion meter, and test strip with reflectometer, the paper test-strip used in conjunction with a hand-held reflectometer was most closely correlated with ion chromatography method in nitrate content, and then it would be suggested with a tool that a farmer can use rapidly, conveniently and accurately for nitrate analysis in a field. Nitrate content in soil solution collected by porous cup was very variable on the lapsed time after drip irrigation and the sampling positions such as soil depth and the distance from dripper. As a result, a significant correlation between nitrate contents of soil solutions and 2M KCl soil extract was not found. However, nitrate content in soil solution extracted with a volume basis (soil:water=1:2) showed the highly significant correlation with that in 2M KCl extract. Nitrate contents of cucumber leaf petiole juices was greatly different between upper and lower leaves. Eleven to sixteen positioned-leaf would be a proper sampling position to determine nitrate content in leaf petiole for evaluating nutrient state by plant tissue analysis. From the secondary regression equations between nitrate contents of soil and petiole juice and the yield of cucumber, nitrate levels for real time diagnosis were estimated as $400mg\;l^{-1}$ soil solution by porous cup. $300mg\;l^{-1}$ in a soil volume extraction, and $1400mg\;l^{-1}$ in petiole juice from spring to summer season. In addition, the maximum yield of cucumber fruit in pot test was obtained in nitrate $1500mg\;l^{-1}$ level of petiole juice, which was similar to nitrate $1400mg\;l^{-1}$ in greenhouse trial.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.38 no.1
• /
• pp.103-114
• /
• 2020

This study was conducted on Yuanming New Garden in China, which re-lighted the previously lost or damaged original space through representation from the perspective of creating traditional landscape. We looked at the composition of this place, the comparison of relevant literature and actual representation, and the characteristics of representation techniques. The results are as follows. First, TYuanming New Garden is a representation space with the motif of Yunamingyuan in Beijing. An advisory group of some 400 related experts discussed the prototype. The historicity of the real space was considered in the representation process. Second, New Yuanmingyuan garden was recreated based on the 'The Forty Scenic Views of Yuanmingyuan', and 31 of the scenic spots were created. The buildings in each precinct had a 1:1 scale response with structures that were previously constructed in Yuanmingyuan, Beijing. New Yuanmingyuan garden's way in which the main landscape is laid out around the Fuhai Lake(福海), which the landscape is drawn appeared was the same as Yuanmingyuan in Beijing. However, some of the facilities were reproduced on the basis of the 'The Forty Scenic Views of Yuanmingyuan', so they turned out to be different from what Yuanminyuan in Beijing looks like today. New Changchunyuan garden was represented around water landscape of the Western Mansins(Xiyang Lou, 西洋樓) area and the Haeakgaegum(海岳開襟), and the buildings and the facilities were reconstructed based on the 'Copper Print of Western Mansins'. Third, Yuanming New Garden made a prototype of the 'The Forty Scenic Views of Yuanmingyuan' and 'Copper Print of Western Mansins' during the process of synchronic changes in the garden. In addition, the original space and the ambiguous original space or exhibition space were clearly identified through the plant. On the other hand, due to the reenactment of buildings, the spatial composition and placeability of the original spaces of Yuanmingyuan garden and Changchunyuan garden in Beijing were not inherited, and the introduction of elements that did not match traditional landscaping spaces, and the introduction of garden elements that were not prototype and other variations for the use of tourism were found to be drawback.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.10 no.7
• /
• pp.1654-1660
• /
• 2009

Two different cutting-oils from H and B companies which are sold as an eco-friendly cutting-oils were selected and the biodegradability of these commercially available cutting-oils was evaluated by the sequencing batch reactor (SBR) processes. The cutting-oil wastes ($H_1$) pre-treated by coagulation/flocculation was used as an influent to SBR. When the F/M ratio was operated 0.04 to 0.08kgCOD/kgMLSS d, removals of $BOD_5$and $COD_{Cr}$were above 97% and 91%, respectively. T-N and T-P removals were above 76% and 81%, respectively. If the diluted cutting-oil wastes ($B_1$) was used as an influent of the SBR, $COD_{Cr}$removals were above 77% at the F/M ratio of 0.01-0.02kgCOD/kgMLSS d. After the cutting-oil wastes was treated by coagulation/ flocculation ($B_2$), $COD_{Cr}$removals was above 85%. If the pre-treated cutting-oil wastes were mixed with a synthetic wastewater ($B_3$) and fed into the SBR in order to mimic the real wastewater treatment plant situation, $BOD_5$and $COD_{Cr}$removals were above 97%, 91%, respectively. T-N and T-P removals were above 79% and 76%. The ratio between $BOD_5$and $COD_{Cr}$, ($COD_{Cr}$-$BOD_5$)/$COD_{Cr}$, indicating the biodegradability of effluent of the SBR, was calculated to 85% and 61%. This means that significant amounts of non-readily-biodegradable organic compounds in the effluent of $H_1$, $B_3$are still present.

• Journal of the Korean Society of Urban Environment
• /
• v.18 no.4
• /
• pp.485-494
• /
• 2018

This study aims to identify the characteristics of oxidation and chemical composition of PM in winter season, 2017 at Incheon area. The mean concentration of air pollutants were $46{\pm}22{\mu}g/m^3-PM_{10}$, $29{\pm}18{\mu}g/m^3/-PM_{2.5}$, $5{\pm}3ppb-SO_2$, $0.56{\pm}0.24ppm-CO$, $21{\pm}13ppb-O_3$ and $28{\pm}17ppb-NO_2$, respectively. The dominant ion of the $PM_{1.0}$ chemical component were organic with $3.2{\mu}g/m^3$ and nitrate with $1.9{\mu}g/m^3$. The day and night variation of the $PM_{1.0}$ chemical components was higher in nighttime than those of daytime. The averaged nitrate oxidation rate (SOR) was 0.06 and sulfate oxidation rate was 0.11 during the field campaign. In the high mass loading period, nitrate oxidation rate (NOR) was up to 0.6 and also the nitrate in $PM_{1.0}$ was increased. The averaged ratio of $NO_x/SO_2$ was 8.7 and nitrate/sulfate was 3.1, respectively. In this results, the nitrate component in $PM_{1.0}$ was influenced by NOx from the stationary source as power plant and the mobile source around the measurement site.

• Clean Technology
• /
• v.28 no.1
• /
• pp.79-93
• /
• 2022

In this study, an electronics industrial wastewater activated sludge model (e-ASM) to be used as a Water Digital Twin was calibrated based on real high-tech electronics industrial wastewater treatment measurements from lab-scale and pilot-scale reactors, and examined for its treatment performance, effluent quality prediction, and optimal process selection. For specialized modeling of a high-tech electronics industrial wastewater treatment system, the kinetic parameters of the e-ASM were identified by a sensitivity analysis and calibrated by the multiple response surface method (MRS). The calibrated e-ASM showed a high compatibility of more than 90% with the experimental data from the lab-scale and pilot-scale processes. Four electronics industrial wastewater treatment processes-MLE, A2/O, 4-stage MLE-MBR, and Bardenpo-MBR-were implemented with the proposed Water Digital Twin to compare their removal efficiencies according to various electronics industrial wastewater characteristics. Bardenpo-MBR stably removed more than 90% of the chemical oxygen demand (COD) and showed the highest nitrogen removal efficiency. Furthermore, a high concentration of 1,800 mg L^-1 T MAH influent could be 98% removed when the HRT of the Bardenpho-MBR process was more than 3 days. Hence, it is expected that the e-ASM in this study can be used as a Water Digital Twin platform with high compatibility in a variety of situations, including plant optimization, Water AI, and the selection of best available technology (BAT) for a sustainable high-tech electronics industry.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.30 no.3
• /
• pp.259-270
• /
• 1985

Meteorological year variations for rice crop from 1973 to 1984 were compared by using air temperature and sunshine hour for nursery period, cooling index for reproductive stage and meteorological yield productivity index for ripening period. The most optimum transplanting date and heading date for crop yield based on real transplanting date-grain yield relationship or heading date-grain yield relationship, meteorological yield productivity index and actual results showed good agreement each other. Around May 26 for transplanting and August 10 for heading were the most optimum date in Indica/Japonica hybrid cultivars while these were about June 8 and August 23 for Japonica cultivars, respectively. On the other hand, theoretical late limiting heading date for safe ripening were August 20 for Indica/Japonica hybrid cultivars and August 30 for Japonica cultivars, respectively, for both methods, cumulative temperature method during ripening with 80% believable frequency and meteorological yield productive index method having 1000(kg/10a) yielding potential. Based on the yield forecast trial, the highest values of photosynthetic efficiency, 2.5%, and crop growth rate, 23g/㎡/day, were recorded during 30 days before rice heading. Considering the photosynthetic efficiency and solar radiation, the potential crop growth rate was more or less 30g/㎡/day and the biological grain yielding potential in a existing cultural practices was approximately 900-1000(kg/10a) in Milyang weather condition. To increase further yielding potential, either photosynthetic efficiency or harvest index or both should be improved by manipulating appropriate canopy architecture, plant spacing, fertilizer, chemical, etc.

• Journal of the Economic Geographical Society of Korea
• /
• v.27 no.3
• /
• pp.155-173
• /
• 2024

Using Regional Employment Survey, this article analyzes the widening employment gap between Capital and Non-Capital regions since the 2008 global financial crisis through describing the spatial distribution of employment by industry and occupation, calculating the regional downward employment rate of university graduates, and estimating the regional distribution of employment growth in terms of wage distribution, and then statistically analyzes the effect of the declining manufacturing employment in the Non-Capital region since the mid-2010s on total employment change. The results from these analyses are as follows. First, since the mid-2000s, the share of producer services and white-collar jobs has increased in the Capital region. Second, the Non-Capital region has a higher share of non-regular workers relative to wage workers than the Capital region. Third, while the downward employment rate has increased in the Non-Capital region since the mid-2010s, it has risen very modestly or stagnated in the Capital region. Fourth, in terms of wage distribution, the pattern of employment growth since the mid-2010s has been U-shaped, a typical polarized pattern of simultaneous growth in low- and high-wage jobs and decline in middle-wage jobs in the Non-Capital region, while in the Capital region it has been L-shaped with the sides reversed, driven by growth in high-wage jobs. Fifth, this employment polarization in the Non-Capital region since the mid-2010s is associated with employment changes in manufacturing, which accounts for a large share of middle wage jobs. Finally, according to the analysis of the effect of regional manufacturing employment changes on total employment changes since the mid-2010s, declines in manufacturing employment reduce the region's regular employment rate and have a larger negative employment effect in the Non-Capital region. Based on these findings, some policy issues are discussed including the branch plant economy regime based on spatial separation of conception and execution, the mix of geographic and skill mobility, the need to improve employability and jobs through human capital accumulation, and short- and long-term responses to employment fluctuations.