• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 추계학술대회논문집 I
• /
• pp.247-251
• /
• 2001

Nowadays, base isolation systems such as lead-rubber bearing, elastomer bearing and sliding bearing have been installed to the various structures to prevent the disaster from seismic. The performance of base isolation system have been well proved by model-scale experiments and numerical analysis. However. the seismic response data measured at real large base-isolated structures is still insufficient. This paper presents a seismic monitoring system, acquiring real-time acceleration signals up to 32 channels, displaying time history and spectrum of the signals, storing the acquired data at a PC hard disk, and replaying the saved data. Moreover, the system can be operated without any limitation for monitoring period by automatic management of stored data file. The developed system has been installed at a real base-isolated building using lead-rubber bearings and we expect its seismic response data with ground motion signal can be well licquired in case of earthquake occurrence.

• 국제학술발표논문집
• /
• The 2th International Conference on Construction Engineering and Project Management
• /
• pp.50-60
• /
• 2007

The endeavor of this paper focuses on designing a monitoring system to provide a cost-effective solution on quality assurance for construction projects. The construction site monitoring system integrates a long-range wireless network, network cameras, and a web-based collaborative platform. The users of the system could obtain the most updated status of construction sites, such as behaviors of workers, project progress, and site events anywhere with Internet connectivity. It was carefully configured in order to maintain the reliability under the reactive conditions of the construction sites. This paper reports the architecture of the monitoring system and reviews the related technologies. The system has been implemented and tested on a construction site and promising results were obtained.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.948-950
• /
• 1999

In this paper, a monitoring system is desigend for a GPS/INS integration system. The function of the monitoring system is to acquire real-time data from system and displayed them. The monitoring system supervises the operation of navigation system. Visual C++ was used in the implementation. The performance of the monitoring system was verified through a real-time test for a GPS/INS Integration system which is composed of a GPS Receiver. IMU(Inertial Measurement Unit), NCU (Navigation Computer Unit)

• 전기학회논문지P
• /
• 제66권4호
• /
• pp.182-187
• /
• 2017

Synchronous generators have been significantly applied in large-scale power plants and its monitoring systems are additionally established to sequentially observe states and outputs. We develop a computer based monitoring device for three-phase synchronous power generators in this paper. First, a test-bed of such generator system is created and then a interface board is constructed to transfer electric signals including the output voltage and the current from generators into a computer system via a data acquisition device. Its RMS(root-mean-square) values are continuously shown on a screen of computer systems and its time-histories graphs are additionally illustrated under a graphic user interface(GUI) mode. Lastly, we carry out real-time experiments using the generator system with the monitoring device to demonstrate its reliability and superiority by comparing results of a generic power analyzer which is well-used in measuring various power systems practically.

• 한국전기전자재료학회논문지
• /
• 제21권5호
• /
• pp.397-401
• /
• 2008

Most of the topic in PCB industry was about increasing the volume of product for the development of electronics in numerous industrial application area. However, it has been emerged that yield improvement quality manufacturing via detecting any suspicious process in order to minimize the scrapped product and material waste. In addition, recently, restriction of hazardous substances (RoHS) claims that electronic manufacturing environment should reduce the harmful chemicals usage, thus the importance of monitoring copper etchant and detecting any mis-processing is crucial for electronics manufacturing. In this paper, we have developed real-time chemical monitoring system using RGB sensor, which is simpler but more accurate method than commercially utilized oxidation reduction potential (ORP) technique. The developed Cu etchant monitoring system can further be utilized for copper interconnect process in future nano-semiconductor process.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권8호
• /
• pp.803-807
• /
• 2008

유비쿼터스 미들웨어는 다양한 서비스들의 집합체로 구성되어 있다. 서비스들은 서로 다른 언어로 작성 될 수 있고, 다양한 서비스들의 추가 및 변경이 동적으로 발생하는 환경에서 서비스 협업이 이루어진다. 이러한 환경에서 서비스하는 유비쿼터스 시스템은 실시간 시스템에 적합한 응답성과 신뢰성이 요구된다. 본 논문에서는 실시간으로 추가되거나 제거되는 서비스들 사이에서 모니터링 시스템이 런-타임 환경에서 지속적인 모니터링을 하고, 어플리케이션과의 결합으로 발생하는 오버헤드를 최대한 줄여서 어플리케이션의 성능 및 신뢰성을 보장할 수 있는 모니터링 에이전트를 제안한다. 제안된 기법은 시나리오 상황에 맞는 데모를 보이고 실험을 통해 서비스 어플리케이션에 대한 모니터링 기능과 성능을 검증하였다.

• 한국통신학회논문지
• /
• 제30권10B호
• /
• pp.630-638
• /
• 2005

네트워크 및 종단 노드의 시스템에 걸친 제한된 자원을 활용하여 실현되는 영상/음성 전달 서비스를 위한 멀티미디어 응용 프로그램의 품질을 보장하기 위해서는 지연, 지터, 손실과 같은 전송 상태와 CPU, 메모리의 사용량과 같은 시스템의 상태를 동시에 관찰하는 것이 필요하다. 본 논문에서는 액세스그리드 (Access Grid) 경우와 같이 IP 멀티캐스트 상에 동작하는 RTP/RTCP에 기반한 실시간 미디어 응용 프로그램을 대상으로 동적/정적 모니터링 방식을 혼용하여 멀티캐스트 상태와 시스템 상태를 측정하는 혼성 모니터링 방식을 제안한다. 또한 종단간 전송 품질이 저하된 경우 제안한 모니터링 방식에서 측정된 결과를 비교/분석하여 품질 저하의 원인을 판단하고 원인에 적합한 대응방안을 연계하고i라 한다. 이 결과를 바탕으로 네트워크/시스템의 상태 변화에 적응적인 영상/음성 전송 서비스의 가능성을 타진하고 종단간 전송 품질 저하 방지를 위한 효과를 예상한다.

• 한국재난정보학회 논문집
• /
• 제12권2호
• /
• pp.122-129
• /
• 2016

본 연구에서는 돌발적 충격에 의한 파손사전 예방감시를 위한 이중구조 파이프, 측량 및 시공 속성정보 수집을 위한 스마트 폰 앱 프로그램 개발, 실시간 감시를 위한 서버프로그램 등을 개발하였다. 본 연구에서 개발한 시스템의 효과를 분석하기 위하여 파일럿규모의 시험을 야외시험장에 구축하였다. 파손 예방을 위한 데이터는 파이프에 부착된 센서를 통하여 감지된다. 누출은 압력센서를 일정한 간격으로 설치하여 시험하였다. VRS 측량장비와 스마트폰을 연계한 앱 프로그램과 서버프로그램을 통하여 실시간 자료 수집과 감시가 가능하도록 하였다.

• 센서학회지
• /
• 제28권5호
• /
• pp.294-298
• /
• 2019

Pulsed laser-based optical sensor monitoring systems for real time microplastic particle counting are proposed and developed in this study. To develop our real time monitoring system, we used a 450 nm pulsed laser and a photomultiplier with very high quantum efficiency. First, we demonstrated that the microplastic particle counting system could detect standard micro bead samples of 100, 250, and $500{\mu}m$ in river water. We then performed research concerning pulsed laser-based optical spectral sensor systems for real time microplastic monitoring. Additionally, we demonstrated that the real time microplastic remote monitoring system using LoRa communications could detect microplastic in the tap water resource protection area.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.223-223
• /
• 2000

Embedded system area has brought an innovation and has been spread rapidly by the growth of the Internet, wireless telephony and multimedia recently. Many embedded systems are required to be real-time systems in that it needs multi-tasking and priority based scheduling. This paper introduces a real-time system that was developed with web server ability for control and monitoring system employing a real-time operating system. It discusses the design model, structure, and applications of web server system. We used SNDS100 board which has a 32-bit RISC microcontroller of ARM7TDMI core as a hardware platform. MicroC/OS kernel was used as Real-time operating system that supports a preemptive and multitasking functions. We developed a hierarhchical control and monitoring system that not only reduced system and management costs, but also enhanced reusability and portability.