• 한국산업보건학회지
• /
• 제26권3호
• /
• pp.301-306
• /
• 2016

Objectives: Direct-reading instrument(Photoionization detectors, PID) and quantitative analysis using active type air sampling (Gas chromatography-flame ionization detector, GC-FID) were tested to evaluate their ability to detect volatile organic compounds(VOCs) in a semiconductor manufacturing plant. Methods: The organic compounds used were acetone and ethanol which are normally used as cleaning solutions in the semiconductor manufacturing. The evaluation was based on the preparation of test solutions of known acetone and ethanol concentration in a chamber($600{\times}600{\times}1150mm$). Samples were prepared that would be equivalent to 5~100 ppm for acetone and 10~ 200 ppm ethanol. GC-FID and PID were evaluated simultaneously. Quantitative analysis was performed after sampling and the direct-reading instrument was checked using real-time data logging. Results: Positive correlations between PID and GC-FID were found for acetone and ethanol at 0.04~2.4% for acetone(TLV: 500 ppm) and 0.1~8.3% for ethanol(TLV: 1000 ppm). When the sampling time was 15 min, concentration of test solution was the most similar between measurement methods. However, the longer the sampling time, the less similar the results. PID and GC-FID had similar exposure patterns. Conclusions: The results indicate that PID and GC-FID have similar exposure pattern and positive correlation for detection of acetone and ethanol. Therefore, PID can be used for exposure monitoring for VOCs in the semiconductor manufacturing industry. This study has significance in that it validates measuring occupational exposure using a portable device.

• Pediatric Gastroenterology, Hepatology & Nutrition
• /
• 제23권6호
• /
• pp.511-520
• /
• 2020

Purpose: Thickened infant formulas reduce regurgitation frequency and volume. Because the digestive tolerance of locust bean gum-containing formulas is controversial, the effectiveness and tolerance of a locust bean gum-thickened formula in infants presenting with regurgitation was evaluated. No other interventions were allowed during the 1 month follow-up period. Methods: We conducted an open, prospective, observational study of a locust bean gum-thickened formula administered to infants presenting with moderate to severe regurgitation according to parents during 1 month. Effectiveness and tolerance were assessed by evaluating gastrointestinal symptoms and quality of life indicators. Results: A total of 2,604 infants with an average age of 9.3±4.3 weeks were included in this 1 month trial. Regurgitation frequency and estimated volume decreased significantly (p<0.001) and the episodes were resolved completely in 48% of the infants. A significant decrease in duration of crying and episodes of gas (p<0.001), with improvement in quality of life parameters, was observed. Stool frequency increased and stool consistency softened (p<0.001) to levels within the physiologic range, consistent with the increased fiber load (0.42 g/100 mL). Conclusion: Locust bean gum-thickened formula decreased infant regurgitation, was well tolerated, and improved parental quality of life. Stool composition and frequency of the infants remained within the physiologic range.

• 비파괴검사학회지
• /
• 제26권2호
• /
• pp.108-114
• /
• 2006

3차원 디지털 스펙클 토모그래피를 개발하여 레이저 영상 신호로부터 비정상, 비대칭 부탄 유동의 밀도분포를 분석하였다. 이러한 유동 해석을 위해 3가지 각도에서 CCD 영상으로부터 스펙클의 이동 신호를 획득하여 유동이 없을 때와 있을 때의 스펙클 변화를 상호 상관법에 의해 계산하였다. 이 때 스펙클의 이동 신호는 유동의 밀도 구배에 따라 굴절각으로 변환될 수 있다. 그 굴절각을 적분하여 광선의 주름 변이를 얻고 이로부터 실시간 곱셈산술재건법(MART)을 이용하여 부탄의 3차원 밀도장 재건을 수행하였다.

• 한국산업보건학회지
• /
• 제29권4호
• /
• pp.452-463
• /
• 2019

Objectives: The purpose of this study is to evaluate airborne concentrations of volatile organic compounds(VOCs) during nail art practice by college students. Methods: Personal samples for students were measured using passive samplers(OVM 3500) during three kinds of practice, including polish nail, gel nail and acrylic French sculpture at two universities located in Gyeongsangbuk-do Province. We also monitored area concentrations using active samplers and real-time total VOC monitors(ppbRAE 3000). All samples were analyzed with a gas chromatography flame ionized detector. Statistical analysis for monitored data were conducted using a web-based Bayesian toolkit, EXPOSTATS(www.expostats.ca). Results: Twenty-four personal samples and ten area samples were collected and five chemicals(acetone, butyl acetate, ethyl acetate, ethyl methacrylate(EMA) and methyl methacrylate(MMA)) were detected. Acetone was detected in all personal samples and ranged from 2.58 ppm to 50.3 ppm. EMA was detected in all personal and area samples with a maximum concentration of 9.78 ppm during acrylic French sculpture. Personal exposure levels to acetone, butyl acetate and mixtures were significantly higher with high occupant density (p<0.05). Geometric mean (GM) concentrations of 3.61 ppm for EMA personal samples were significantly higher than that of area samples, 1.5 ppm (p<0.05). Since there was no local ventilation, total VOC concentration continued to increase as the practice progressed. Conclusions: In order to minimize VOCs exposure for trainees, it is necessary to introduce a local ventilation system and maintain adequate occupant density.

• 한국염색가공학회지
• /
• 제6권3호
• /
• pp.27-36
• /
• 1994

In order to produce a water repellent surface on polyester fabric, samples were treated in the atmosphere of $CF_4$ glow discharge plasma. The samples used in the study were ployester fabric and poyester film. The purpose of film treatment is for the comparison of hydrophobicity with fabric sample at same treatment condition. Radio frequency(13.56MHz) generator was used as electric source and its in put power is 100 Watt. Water repellency was evaluated by contact angle measurement. Result obtained are as follows. 1) Fiber interstice of original fabric was ana lysed as 0.43$\mu$m, and this value was sufficiently ideal for making water repellent fabric. 2) The most favorable setting position of substrate was the center area between two electrodes. 3) Fabric contact angle was higher than film contact angle at same treatment condition, and its difference was more than 50${\circ}$. And it was incapalbe of fabric contact angle measurement when the film contact angle was less than 90${\circ}$. because the fabric is susceptible to absorption of water by the capillary effect. 4) Fabric contact angle can not revealed the precise defferences of surface hydrophobicity, however, the film contact angle showed the real hydrophobic nature. 5) It was not sufficient method to evaluate the hydrophobicity of fabric surface by merely measure of the water contact angle. 6) It showed high water repellent nature at 0.06 torr of $CF_4$ plasma gas pressure and duration of 45 seconds treatment, and it can not be anticipated more improved nature if the pressure and duration of treatment time were increased.

• 한국정보통신학회논문지
• /
• 제16권11호
• /
• pp.2446-2452
• /
• 2012

국내외의 배출가스 규제 강화에 부합하기위하여, 사용자 의도에 따른 연료 분사시기와 분사량 조절이 가능한 커먼레일 ECU를 제어할 수 있는 알고리즘 개발의 필요에 따라서 본 논문에서는 커먼레일 엔진 전용 ECU에 적용할 수 있는 노킹 판별 및 엔진 밸런스 보정이 가능한 노킹 진단 알고리즘을 구현하여 시뮬레이터로 개발하였다. 또한 운전자가 직접 차량을 진단하는 운전자 중심의 진단 서비스를 제공하고자 시뮬레이터의 결과를 OBD-II 표준에 의거하는 차량 위주의 진단기로 개발하고자 한다. 이를 위해 자동차 고장진단 신호 및 센서 출력 신호를 송수신하는 유선 시스템과 무선 시스템인 블루투스 모듈을 이용하여 실시간 통신이 제공될 수 있는 OBD-II 진단기 S/W 설계방안을 제안함으로써 차량의 연비향상 및 유해가스 저감을 통한 엔진의 효율성 향상을 실현하도록 한다.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.92-99
• /
• 2011

To measure the traffic pollutants with high temporal and spatial resolution under real conditions, a mobile emission laboratory (MEL) was designed. The equipment of the mini-van provides gas phase measurements of CO, NOx, $CO_2$, THC (Total hydrocarbon) and number density & size distribution measurements of fine and ultra-fine particles by a fast mobility particle sizer (FMPS) and a condensation particle counter (CPC). The inlet sampling port above the bumper enables the chasing of different type of vehicles. This paper introduces the technical details of the MEL and presents data from the car chasing experiment of diesel bus equipped with aftertreatment system. The dilution ratio was calculated by the ratio of ambient NOx and tail-pipe NOx. Most particles from the diesel bus were counted under 300 nm and the peak concentration of the particles was located between 30 and 60 nm. The total PM number emission from diesel bus equipped with DPF was 10 orders of magnitude lower compared to those emitted from base diesel bus. And the total PM number emission from diesel bus equipped with SCR was comparable to the particle emission from base diesel bus.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권9호
• /
• pp.4103-4121
• /
• 2018

Quality of Service (QoS) awareness is recognized as a key point for the success of Internet of Things (IOT).Realizing the full potential of the Internet of Things requires, a real-time task scheduling algorithm must be designed to meet the QoS need. In order to schedule tasks with diverse QoS requirements in cloud environment efficiently, we propose a task scheduling strategy based on dynamic priority and load balancing (DPLB) in this paper. The dynamic priority consisted of task value density and the urgency of the task execution, the priority is increased over time to insure that each task can be implemented in time. The scheduling decision variable is composed of time attractiveness considered earliest completion time (ECT) and load brightness considered load status information which by obtain from each virtual machine by topic-based publish/subscribe mechanism. Then sorting tasks by priority and first schedule the task with highest priority to the virtual machine in feasible VMs group which satisfy the QoS requirements of task with maximal. Finally, after this patch tasks are scheduled over, the task migration manager will start work to reduce the load balancing degree.The experimental results show that, compared with the Min-Min, Max-Min, WRR, GAs, and HBB-LB algorithm, the DPLB is more effective, it reduces the Makespan, balances the load of VMs, augments the success completed ratio of tasks before deadline and raises the profit of cloud service per second.

• 천문학회지
• /
• 제37권4호
• /
• pp.151-157
• /
• 2004

It is investigated quantitative relations between the magnetic storm magnitude and the solar wind parameters such as the Interplanetary Magnetic Field (hereinafter, IMF) magnitude (B), the southward component of IMF (Bz), and the dynamic pressure during the main phase of the magnetic storm with focus on the role of the interplanetary shock (hereinafter, IPS) in order to build the space weather fore-casting model in the future capable to predict the occurrence of the magnetic storm and its magnitude quantitatively. Total 113 moderate and intense magnetic storms and 189 forward IPSs are selected for four years from 1998 to 2001. The results agree with the general consensus that solar wind parameter, especially, Bz component in the shocked gas region plays the most important role in generating storms (Tsurutani and Gonzales, 1997). However, we found that the correlations between the solar wind parameters and the magnetic storm magnitude are higher in case the storm happens after the IPS passing than in case the storm occurs without any IPS influence. The correlation coefficients of B and $BZ_(min)$ are specially over 0.8 while the magnetic storms are driven by IPSs. Even though recently a Dst prediction model based on the real time solar wind data (Temerin and Li, 2002) is made, our correlation test results would be supplementary in estimating the prediction error of such kind of model and in improving the model by using the different fitting parameters in cases associated with IPS or not associated with IPS rather than single fitting parameter in the current model.

• 중소기업융합학회논문지
• /
• 제1권1호
• /
• pp.39-44
• /
• 2011

인류가 석탄, 석유, 천연가스 화석 연료 등 연로들에 대한 무절제한 사용으로 하여 전 세계적으로 심각한 환경오염과 화석 연료의 자원 고갈문제에 직면하게 되었다. 따라서 이러한 환경오염 문제를 줄이고 또한 고갈돼가고 있는 화석 연료를 대체할 태양 에너지, 풍력, 수력, 바이오매스, 지열 등과 같은 신재생에너지 자원의 개발이 필요하게 되었다. 최근 센서 네트워크 기술의 발달로 인하여 신재생 에너지 데이터는 각종 센서들로부터 원격으로 수집이 된다. 그러나 이러한 데이터는 센서 네트워크로부터 실시간으로 연속적으로 무한히 수집되는 센서 스트림 데이터이기 때문에 주기적으로 갱신되는 데이터 수집 방법으로는 최신의 데이터를 유지하기 어려우며, 부정확한 분석 결과를 도출할 수 있다. 따라서 본 논문에서는 무선 센서 네트워크 내에서 데이터 스트림을 효율적으로 수집하고 센서의 전송 횟수를 감소하기 위한 칼만 필터링 기법에 기반 한 필터링 기법을 제안하였다.