• Journal of the military operations research society of Korea
• /
• v.16 no.1
• /
• pp.113-129
• /
• 1990

This paper presents the simulation model to decide the mean size of cannibalization aircraft (MSCA) under steady state when an airbase makes use of cannibalization to support the spare parts of an airfleet. In this model, the essential factors such as mission requirements, mission time, failure time, repair time, repair capability, inventory policy, cannivalization rule are considered. The model is constructed with above factors and actual airbase operating rules for a basis. Because of the tangled interdependencies among the each factors, it is inevitable to construct the model by the simulation technique. The mission and support system of the airbase is considered as a closed queueing network with a finite number of unit The troubled aircrafts are repaired in accordance with the priorities that are determined by their repair times. The illustrative example of the model, using the actual data of xx-airbase, is presented. The model would be a useful tool not only to determine the MSCA and the size of scheduled maintenance aircraft but to evaluate the NORS (not operationally ready supply) rate and the availability of an airfleet.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4A
• /
• pp.411-417
• /
• 2008

This paper proposes BSFP (Bluetooth Scatternet Formation Protocol), which establishes a multi-hop bluetooth scatternet. BSFP independently operates on each bluetooth device, does not require any information on neighbor devices at the very beginning, and can establish a scatternet even though all the devices are spreaded beyond the bluetooth transmission range. BSFP is composed of the following three stages; 1) Init stage to investigate neighbor nodes, 2) Ready stage to establish a scatternet using gathered local information at each node, and 3) Complete stage to use the determined scatternet links. In BSFP, the scatternet formation time does not significantly affected by the number of bluetooth devices and a robust mobile ad hoc network is formed because BSFP formulates a scatternet with many adjacent links to neighbor devices.

• The Journal of the Convergence on Culture Technology
• /
• v.5 no.4
• /
• pp.87-92
• /
• 2019

The purpose of this study is to investigate the preparation time of fire-fighting water for public fire hydrants and ground, underground fire hydrants. The equipment preparation time for stage 1 was 20.50 seconds for ground type and 24.67 seconds for underground type. The reason for this difference in preparation time is that an underground fire hydrant requires additional standpipes to connect to the main conduit of Paru and the underground hydrant, which open the manhole cover. Water tank Maintenance joint with water hose male coupling of the second stage was similar to that of the ground type of 48.50 seconds and underground water tipe of 49.00 seconds. This is because the operation of connecting the fire hose to the maintenance tank of the water tank car is the same. In the third stage, the water pipe connection was 43 seconds for ground type and 174.33 seconds for underground type. The reason why the time for connecting the water pipe to the fire hydrant is large difference is that the underground fire hydrant is opened by opening the manhole cover, After connecting the stand pipe to the fire hydrant, the additional process of connecting the water pipe to the stand pipe is required, which is considered to have greatly increased the time required. The opening of Water Control Valve and spindle Valve in the fourth stage was 66.50 seconds for the ground type and 78.83 seconds for the underground type. This difference is due to the fact that the spindle of the ground fire hydrant is located on the main body and can be easily opened, but the underground type is located next to the main body under the manhole and requires additional time to connect the opening equipment.

• Journal of Korean Academy of Nursing
• /
• v.16 no.1
• /
• pp.67-80
• /
• 1986

The use of intravenous solutions for fluid replacement has become an integral part of patient care, This widespread use of intravenous solutions has increased the risk of contamination that can lead to septicemia and phlebitis. The literature regarding contamination of in use intravenous solutions recommends a standard 24-hour time limit on the use of these fluids. But the desings of these studies did not incorporate a time variable related to contamination. In other studies, however, time was a manipulated variable: but data regarding the onset of contamination were conflicting. Because published reports conflict with regard to a time standard related to the use of intravenous therapy, additional empirical data are needed upon which to base the standards of care regulating use of intravenous therapy. This study investigated rate of contamination in simulated in-use intravenous solutions to obtain data from which to recomend a standard time period for the administration of intravenous solutions. In this study samples were drawn from 60 bottles of 5% D/W solution at predetermined time intervals over 48 hours and samples were inoculated to Thio-glychollate Broth. After 10 days' culturing in that Broth, samples were cultured on blood agar plates for 18∼48 hours to determine the rate of contamination. was found at all time Period, regardless of the presence or absence of nurse's gloving in the preparation of fluids, the location in which the experimentations were performed, the contamination level of surrounding air, or the length of time during which solutions were opened. Data from this study support the use of a 48-hour time period on which to base the standard involved in ready-to-use simple intravenous solutions without additives. In emergency departments and critical care areas where intravenous solutions are prepared in advance, the suggested time standard supported by the data generated from this study is 48 hours, not 24 hour. Data from this study support a 24-hour time standard for changing in-use intravenous solutions when the contamination results from the manipulation of intravenous infusion system by hospital personnel, or from some other exogenous sources during administration. Because contamination that does occur within 48 hours in intravenous solutions must be introduced from some exogenous sources, further empirical studies based on the identification of sources of contamination and factors that affect the rate of contamination, are needed to investigate the currently employed standard of intravenous therapy and to provide the patient with more efficient and safer intravenous thereapy.

• Food Science and Preservation
• /
• v.30 no.2
• /
• pp.262-271
• /
• 2023

The objective of this study is to compare and assess the effectiveness of real-time polymerase chain reaction (RT-PCR), loop-mediated isothermal amplification (LAMP), and the selective agar plate method for the detection of Salmonella spp. and Listeria monocytogenes in ready-to-eat (RTE) foods. In RTE foods, the detection performance of the three methods (RT-PCR [SureTect^TM kit and PowerChek^TM kit], LAMP [3M MDS], selective agar) were similar at 0-10, 10-50, 50-100, and 100- CFU/mL of Salmonella spp. and L. monocytogenes. We found that with RT-PCR, the Ct value of salad was significantly higher (p<0.05) than other RTE foods, indicating that fiber plays a critical role as an obstacle to the rapid detection of Salmonella spp. However, the Ct value displayed a mixed pattern according to the inoculation level of L. monocytogenes. The use of rapid detection kits and machines mostly depends on the user's choice, with accuracy, ease of use, and economy being the primary considerations. As an RT-PCR kit, SureTect^TM and PowerChek^TM showed high accuracy in detecting Salmonella spp. and L. monocytogenes in RTE foods, showing that they can replace the existing RT-PCR kits available. Additionally, LAMP also showed excellent detection performance, suggesting that it has the potential to be used as a food safety management tool.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1995.10a
• /
• pp.235-240
• /
• 1995

A 36 stories high multi-use building was designed with the specified concrete strength range of 300~400kg/$\textrm{cm}^2$ On the ground of the concept of compressive strength, adequate mix designing for the concrete, which has the target strength range of 390-520kg/$\textrm{cm}^2$, was carried out to provide enough strength margin. And with due regard to the workability and transportation time, the slump and slump flow ranged 16~21cm and 30~45cm respectively, maintaining these properties up to 2-hours from the beginning of the mix. The high-range water reducer is incorporated into the mix as a admixture. The building construction is controlled satisfactorily, so far. The actual average 28-day compressive strength is 370kg/$\textrm{cm}^2$, the standard deviation is 28kg/$\textrm{cm}^2$ and the coefficient of variation is 7.6% for concrete of 300kg/$\textrm{cm}^2$ specified strength.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.32 no.3
• /
• pp.537-542
• /
• 2005

Dentofacial trauma can result in tooth fracture, avulsion, facial bone fracture. The Unites states and Japan mandated the use of mouthguards for contact sports. But, Korean didn't. Mouthguards divided into ready-made type and custom-made type. Mouthguards protect the lips, intraoral soft tissues, teeth and provide the mandible with resilient support to prevent jaw fracture and dislocations. Sports-related accidents have been reported to be one of the most common causes of dentofacial trauma. Sports trauma of involving teeth with incomplete root formation cause long chair time, multiple visit, economic considerations, additional dental services. So, mouthguards can offer considerable protection against sports-related trauma.

• Journal of Technologic Dentistry
• /
• v.7 no.1
• /
• pp.27-31
• /
• 1985

From time to time, it is necessary to reconstruct the crown for the abutment tooth of the partial denture. It has been difficult and lack of accuracy in it's construction. I studied and discovered a new method of reconstructing the crown, that is rather easier and more accurate than being used, in the following points. 1) It is good in function and use of the partial denture ready made. 2) It is good to protect the periodental tissue and avoid the uneasy feeling. 3) It is so easy and accurate in the procedure of reconstruction. 4) And patient's charge would be less, because of not reconstructing the partial denture.

• Journal of the Korea Concrete Institute
• /
• v.17 no.1 s.85
• /
• pp.105-112
• /
• 2005

Stabilizing and rousing sludge water generated from washing truck mixer and batcher plant can resolve inconsistency in quality and improve strength, therefore it is essential to review how to utilize it. This research conducted experiments and studied on solids of sludge water to find out the types of stabilizing agents available in conditions of producing ready mixed concretes in Korea. The result showed that oxy carboxylic acid retarder dedicated for stabilizing sludge water was most effective in decreasing solid. However, the setting time of cement paste was retarded due to surplus reactants, but it did not impede application of ready mixed concretes. When we left the sludge water mixed with stabilizing agent, it has been noted that initial retard effect recovered to the level using just service water in 7${\~}$8 days and that it is effective to use stabilized sludge water in 2${\~}$3 days. On the other hand, saccharic type super retarding agent was also outstanding in applicability by showing similar effect. The sludge water stabilizing agents currently marketed depend on imports, therefore it is necessary to locally manufacture usable stabilizing agents and to review its usability with multi-dimensional view.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.2
• /
• pp.29.4-30
• /
• 2018

Welcome to Gemini! In this overview, I'll describe the governance, operations, and capabilities of the Gemini telescopes. I'll also describe Gemini's vision and plans for the future. Gemini is very adaptable and has multiple ways to apply for time, multiple ways to collect your data, and multiple instrument capabilities ready for your observations. Gemini also runs a wide-reaching program to develop and improve our instrumentation capabilities. We run an upgrade program for our existing instruments that includes an annual public call for proposals, a visitor instrument program that brings instruments like IGRINS to our telescopes for short to semi-permanent runs, and a facility program that provides entirely new instruments like GHOST and SCORPIO to Gemini for full public use. Through these programs, you can interact with Gemini in a number of ways to support your scientific needs in the most efficient way possible.