• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.448-456
• /
• 2016

Severe accident scenarios in nuclear reactors, such as nuclear meltdown, reveal that an extremely hot molten core may fall into the nuclear reactor cavity and seriously affect the safety of the nuclear containment vessel due to the chain reaction caused by the reaction between the molten core and concrete. This paper reports on research focused on the type and amount of vapor produced during the reaction between a high-temperature molten core and concrete, as well as on the erosion rate of concrete and the heat transfer characteristics at its vicinity. This study identifies themass fraction and melting temperature as the most influential properties of concrete necessary for a safety analysis conducted in relation to the thermal interaction between the molten core and the basemat concrete. The types of concrete that are actually used in nuclear reactor cavities were investigated. The $H_2O$ content in concrete required for the computation of the relative amount of gases generated by the chemical reaction of the vapor, the quantity of $CO_2$ necessary for computing the cooling speed of the molten core, and the melting temperature of concrete are evaluated experimentally for the molten core-concrete interaction analysis.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2012년도 추계 학술논문 발표대회
• /
• pp.193-194
• /
• 2012

Construction work is affected by the weather; e.g. snowfall, rainfall and low-high ambient temperature, especially at a site in a severe climate. The influence of the weather is one of the possible reasons for delays in a construction schedule and quality deterioration. To protect the worksite from severe weather conditions, the temporary roof and wall could be installed on the outside of main structures designed in advance and the temporary structures could be took down after a period use. The greater coverage all-weather construction method is applied, the larger the effect. so, it is important and needs that the temporary roof and wall can be widely applied, designed to effectively about structure and layout.

• Nuclear Engineering and Technology
• /
• 제56권3호
• /
• pp.949-958
• /
• 2024

In contrast to all-time flooded small modular reactor (SMR) systems, an in-kind flooding safety system (FSS) has been proposed as a passive safety system applicable to small modular reactors (SMRs) that adopt a metal containment vessel (MCV). Under transient conditions, the FSS can provide emergency cooling to dry reactor cavities and sustain long-term coolability using re-acquired evaporated steam in the reactor building on demand. When designing an FSS, the effect of the flooding flow area is vital as it affects the overall accident sequence and safety. Therefore, in this study, a MELCOR model of a reference SMR is developed and numerical analysis is performed under postulated accident scenarios. Without flooding, the MCV pressure of the reactor module exceeds the design pressure before core damage. To prevent core damage, an emergency flooding strategy is devised using various flow path parameters and requirements to ensure an adequate emergency coolant supply before the core damage is investigated. The results indicate that a flow area exceeding 0.02 m2 is required in the FSS to prevent MCV overpressure and core damage. This study is the first to report a strategic analysis for appropriately sizing an FSS flooding valve applicable to innovative SMRs.

• 한국지진공학회논문집
• /
• 제23권3호
• /
• pp.149-157
• /
• 2019

The purpose of this study is to investigate the effects of the significant duration of ground motions on responses of base-isolated nuclear power plants (NPPs). Two sets of ground motion records with short duration (SD) and long duration (LD) motions, scaled to match the target response spectrum, are used to perform time-history analyses. The reactor containment building in the Advanced Power Reactor 1400 (APR1400) NPP is numerically modeled using lumped-mass stick elements in SAP2000. Seismic responses of the base-isolated NPP are monitored in forms of lateral displacements, shear forces, floor response spectra of the containment building, and hysteretic energy of the lead rubber bearing (LRB). Fragility curves for different limit states, which are defined based on the shear deformation of the base isolator, are developed. The numerical results reveal that the average seismic responses of base-isolated NPP under SD and LD motion sets were shown to be mostly identical. For PGA larger than 0.4g, the mean deformation of LRB for LD motions was bigger than that for SD ones due to a higher hysteretic energy of LRB produced in LD shakings. Under LD motions, median parameters of fragility functions for three limit states were reduced by 12% to 15% compared to that due to SD motions. This clearly indicates that it is important to select ground motions with both SD and LD proportionally in the seismic evaluation of NPP structures.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.535-542
• /
• 2015

원자로 격납건물은 냉각재상실사고와 같이 내부의 과도한 압력이 유발되는 사고에 있어서도 방사성 물질이 외부로 누출되지 않도록 막는 최종의 방벽이다. 이러한 격납건물의 기능적 중요성에 기인하여, 건설 초기 구조건전성시험(SIT)을 수행한다. 이러한 SIT거동을 가장 실제와 가깝게 예측하기 위한 해석 연구를 수행하였다. 해당 연구의 결과는 2편의 논문으로 정리되었는데, 본 논문은 그 중 II편으로 I편의 해석모델 구성 시의 주요 고려사항의 분석 및 예비해석 결과를 반영한 상세 해석 모델의 구성 과정 및 해석 결과를 제시하고 있다. 특히 비부착식 텐던으로 시공된 구조물에서 덕트관에 의한 강성 저감효과 및 덕트관을 사이에 둔 텐던과 콘크리트간의 밀착 여부에 따른 영향을 해석 시 최대한 고려하고자 하였다. 이러한 과정을 통해 구축된 해석 모델에 따른 변위과 신고리 3호기 SIT 측정변위를 비교한 결과, ASME CC-6000 기준을 충분히 만족시키는 결과가 나타남을 확인하였다.

• 에너지공학
• /
• 제24권3호
• /
• pp.96-108
• /
• 2015

피동원자로건물냉각계통(Passive Containment Cooling System; PCCS)은 전원 공급 없이도 원자로건물 내부의 열을 제거하여 그 건전성을 유지시키기 위한 안전설비이다. 본 연구에서는 현재 연구중인 PCCS를 1400 MWe 가압경수형 원전(APR1400)에 설치하는 경우 PCCS 성능을 분석하였다. 분석도구로 계통열수력분석코드 MARS-KS1.3을 사용하였다. PCCS의 성능분석을 위해 APR 1400 표준안전성분석 보고서를 참고하여 원자로건물 내부의 최대압력을 유발하는 사고 시나리오인 저온관 양단 파단사고를 모의하였다. 이 계산에서는 PCCS, 원자로냉각계통 및 원자로건물의 열수력을 동시에 모의하였다. 계산결과를 통해 기존의 원자로건물 살수계통을 대체하여 PCCS가 원자로건물의 건전성을 유지시킬 수 있음을 확인하였다. 또한 PCCS의 성능에 영향을 줄 수 있는 여러 인자를 변경해가며 민감도 분석을 수행하였고 PCCS의 문제점도 확인하였다.

• 한국전산구조공학회논문집
• /
• 제28권5호
• /
• pp.523-533
• /
• 2015

원자로 격납건물은 냉각재상실사고와 같이 내부의 과도한 압력이 유발되는 사고에 있어서도 방사성 물질이 외부로 누출되지 않도록 막는 최종의 방벽이다. 이러한 격납건물의 기능적 중요성에 기인하여, 건설 초기 구조건전성시험(SIT)을 수행한다. 신고리 3호기 SIT 시험 당시 계측된 변위를 예측하기 위한 초기 해석 모델은 일부 위치에서 실제 변위를 과소 평가하는 경향을 보임에 따라 이를 개선하고자 하는 연구가 수행되었다. 해당 연구의 결과를 I 편과 II 편의 논문으로 정리하였으며, 본 I 편에서는 초기 해석모델을 개선해가는 과정에서의 해석모델 구성 시의 주요 고려사항의 분석 및 예비해석 결과를 제시하고 있다. 우선적으로 콘크리트 자체의 해석요소(mesh) 구성과 라이너, 철근, 텐던 등의 요소간의 연결 설정이 중요함을 확인하였다. 또한, 다양한 예비해석의 결과를 통해 비부착식 텐던으로 시공된 구조물에서 덕트관에 의한 강성 저감 효과 및 덕트관을 사이에 둔 텐던과 콘크리트간의 밀착 여부에 따른 강성 영향을 적절히 고려하는 것이 중요함을 확인하였다.

• Nuclear Engineering and Technology
• /
• 제54권6호
• /
• pp.2077-2083
• /
• 2022

In the unlikely event of core disruptive accident in sodium cooled fast reactors, the reactor containment building would be bottled up with sodium and fission product aerosols. The behavior of these aerosols is crucial to estimate the in-containment source term as a part of nuclear reactor safety analysis. In this work, the evolution of sodium aerosol characteristics (mass concentration and size) is simulated using HAARM-S code. The code is based on the method of moments to solve the integro-differential equation. The code is updated to FORTRAN-77 and run in Microsoft FORTRAN PowerStation 4.0 (on Desktop). The sodium aerosol characteristics simulated by HAARM-S code are compared with the measured values at Aerosol Test Facility. The maximum deviation between measured and simulated mass concentrations is 30% at initial period (up to 60 min) and around 50% in the later period. In addition, the influence of humidity on aerosol size growth for two different aerosol mass concentrations is studied. The measured and simulated growth factors of aerosol size (ratio of saturated size to initial size) are found to be matched at reasonable extent. Since sodium is highly reactive with atmospheric constituents, the aerosol growth factor depends on the hygroscopic growth, chemical transformation and density variations besides coagulation. Further, there is a scope for the improvement of the code to estimate the aerosol dynamics in confined environment.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.132-140
• /
• 2024

In the event of a severe accident in Sodium Cooled Fast Reactors (SFR), the sodium combustion aerosols along with fission product aerosols would migrate to the environment through leak paths of the Reactor Containment Building (RCB) concrete wall under positive pressure. Understanding the characteristics of sodium aerosol transport through concrete leak paths is important as it governs the environmental source term. In this context, experiments are conducted to study the influence of various parameters like pressure, initial mass concentration, leak path diameter, humidity etc., on the transport and deposition of sodium aerosols in straight leak paths of concrete. The leak paths in concrete specimens are prepared by casting and the diameter of the leak path is measured using thermography technique. Aerosol transport experiments are conducted to measure the transported and plugged aerosol mass in the leak paths and corresponding plugging times. The values of differential pressure, aerosol concentration and relative humidity taken for the study are in the ranges 10-15 kPa, 0.65-3.04 g/m³ and 30-90% respectively. These observations are numerically simulated using 1-Dimensional transport equation. The simulated values are compared with the experimental results and reasonable agreement among them is observed. From the safety assessment view of reactor, the approach presented here is conservative as it is with straight leak paths.

• Nuclear Engineering and Technology
• /
• 제48권1호
• /
• pp.246-258
• /
• 2016

The shield building of AP1000 was designed to protect the steel containment vessel of the nuclear reactor. Therefore, the safety and integrity must be ensured during the plant life in any conditions such as an earthquake. The aim of this paper is to study the effect of water in the water tank on the response of the AP1000 shield building when subjected to three-dimensional seismic ground acceleration. The smoothed particle hydrodynamics method (SPH) and finite element method (FEM) coupling method is used to numerically simulate the fluid and structure interaction (FSI) between water in the water tank and the AP1000 shield building. Then the grid convergence of FEM and SPH for the AP1000 shield building is analyzed. Next the modal analysis of the AP1000 shield building with various water levels (WLs) in the water tank is taken. Meanwhile, the pressure due to sloshing and oscillation of the water in the gravity drain water tank is studied. The influences of the height of water in the water tank on the time history of acceleration of the AP1000 shield building are discussed, as well as the distributions of amplification, acceleration, displacement, and stresses of the AP1000 shield building. Research on the relationship between the WLs in the water tank and the response spectrums of the structure are also taken. The results show that the high WL in the water tank can limit the vibration of the AP1000 shield building and can more efficiently dissipate the kinetic energy of the AP1000 shield building by fluid-structure interaction.