• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.37.2-37.2
• /
• 2005

• 한국연소학회지
• /
• 제19권2호
• /
• pp.1-7
• /
• 2014

In this study, the variation of the flow field in Hydro-reactive engine combustor was numerically studied through 2-dimensional axisymmetric model with aluminum and heated water vapor. For calculating all velocity fields, compressible Navier-Stokes equation was used with Pre-conditioning. AUSM+up(p) method was used to exactly calculate mass flow in the control volume. As using SST model that is a turbulent model, the result had high accuracy for free stream and the flow near the wall. The effects of the temperature, variation of the flow field and distribution of chemical products on inject angle of heated water vapor were studied.

• 에너지공학
• /
• 제6권2호
• /
• pp.137-144
• /
• 1997

선회분류층형 석탄가스화기내의 비반응 난류선회 유동장을 수치해석 기법을 이용하여 해석하였다. 우선 2차원해석과 3차원 해석과의 비교를 통하여 2차원화 가정의 주요변수인 등가틈새(equivalent slit)의 개념이 적절하며, 동시에 2차원 해석결과의 타당성을 입증하였다. 선회분류층형 가스화기내에서 가장 중요한 무차원수인 선회수의 변화에 따른 유동장의 특성변화를 주로 고찰하였다. 또한 유동장의 이론적인 선회수 및 등가틈새너비를 입력으로 이용한 전산해석을 수행하여. 미분탄반응이 존재할 경우의 유동장의 특성을 예측하여 보았다. 버너출구단면적의 크기 및 위치를 적절히 조절함으로써, 가스화기 내부에 미분탄반응에 적절한 유동장을 형성시킬 수 있음을 발견하였다.

• Journal of Magnetics
• /
• 제15권3호
• /
• pp.132-137
• /
• 2010

Plasma etching of $SiO_2$ contact holes was statistically analyzed by a fractional factorial experimental design. The analysis revealed the dependence of the etch rate and DC self-bias voltage on the input factors of the magnetically enhanced reactive ion etching reactor, including gas pressure, magnetic field, and the gas flow rates of $CHF_3$, $CF_4$, and Ar. Empirical models of the DC self-bias voltage and etch rate were obtained. The DC self-bias voltage was found to be determined mainly by the operating pressure and the magnetic field, and the etch rate was related mainly to the pressure and the flow rates of Ar and $CHF_3$.

• Environmental Analysis Health and Toxicology
• /
• 제11권1_2호
• /
• pp.49-57
• /
• 1996

The production of reactive oxygen species on addition of hexavalent chromium (potassium dichromate, $K_2Cr_2O_7$ ) to lung cells in culture was studied using flow cytometer analysis. A Coulter Epics Profile flow cytometer was used to detect the formation of reactive oxygen species after $K_2Cr_2O_7$ was added to A549 cells grown to confluence. The cells were loaded with the dye, 2',7'-dichlorofluorescein diacetate, after which cellular esterases removed the acetate groups and the dye was trapped intracellularly. Reactive oxygen species oxidized the dye, with resultant fluorescence. Increased doses of Cr(VI) caused increasing fluorescence (10-fold higher than background at 200 gM). Addition of Cr(III) compounds, as the picolinate or chloride, caused no increased fluorescence. Electron paramagnetic resonance (EPR) spectroscopic studies indicated that three (as yet unidentified) spectral "signals" of the free radical type were formed on addition of 20, 50, 100 and 200 gM Cr(VI) to the A549 cells in suspension. Two other EPR 'signals" with the characteristics of Cr(V) entities were seen at field values lower than the standard free radical value. radical value.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권3호
• /
• pp.9-12
• /
• 2015

NbN thin films were deposited on thermally oxidized Si substrate at room temperature by using reactive magnetron sputtering in an $Ar-N_2$ gas mixture. Total sputtering gas pressure was fixed while varying $N_2$ flow rate from 1.4 sccm to 2.9 sccm. X-ray diffraction pattern analysis revealed dominant NbN(200) orientation in the low $N_2$ flow rate but emerging of (111) orientation with diminishing (200) orientation at higher flow rate. The dependences of the superconducting properties on the $N_2$ gas flow rate were investigated. All the NbN thin films showed a small negative temperature coefficient of resistance with resistivity ratio between 300 K and 20 K in the range from 0.98 to 0.89 as the $N_2$ flow rate is increased. Transition temperature showed non-monotonic dependence on $N_2$ flow rate reaching as high as 11.12 K determined by the mid-point temperature of the transition with transition width of 0.3 K. On the other hand, the upper critical field showed roughly linear increase with $N_2$ flow rate up to 2.7 sccm. The highest upper critical field extrapolated to 0 K was 17.4 T with corresponding coherence length of 4.3 nm. Our results are discussed with the granular nature of NbN thin films.

• 한국소음진동공학회논문집
• /
• 제20권11호
• /
• pp.1089-1096
• /
• 2010

The relation between the vibration induced from machinery and the radiated sound is complicated. Acoustic intensity method is widely used to obtain the accuracy of noise measurement and noise identification. In this study, as groundwork, the complex acoustic intensity method is performed to identify noise source and transmission path on different free space point source fields. As an industrial application, the complex acoustic intensity method is applied to HVAC to identify sound radiation characteristics in the near field. Experimental complex acoustic intensity method was applied to HVAC, it is possible to identify noise sources in complicated sound field characteristics which noise sources are related with each other, and certificate the validity of complex acoustic intensity. Especially, it can be seen that complex acoustic intensity method using both of active and reactive intensity is vital in devising a strategy for identification of noise. Also, the vector flow of acoustic intensity was investigated to identify sound intensity distributions and energy flow in the near field of HVAC.

• 한국항공운항학회지
• /
• 제15권4호
• /
• pp.17-23
• /
• 2007

This paper describes the flow and performance characteristics inside the post-chamber of the multi-port hybrid rocket motor. Using the computational fluid dynamics (CFD) technique, the non reactive compressible flow fields in the downstream of the fuel grain was numerically calculated. The motor performance obtained from computational results were in agreement with that conducted by the ground motor firing test. Besides, the flow field characteristics inside the post-chamber were discussed under different port numbers (1 port and 3 ports) of the fuel grain. The flow pattern showed that the performance of multi-port hybrid rocket motor having three grain ports is higher than that of the single-port one due mainly to the difference of incoming mass flow rate irrespective to the pressure field.

• 한국항공운항학회지
• /
• 제14권1호
• /
• pp.2-8
• /
• 2006

Numerical analysis of the flow field in the reactive medium of End-Burring combustor is studied in order to investigate the combustion characteristics of hybrid combustion. The main part of this study is focused on the port diameter effects of oxidizer injector on the temperature distribution within the reactive field. It is found that the case having the largest port diameter(25 mm) delivers the optimum conditions for the design of End-Burring combustor where the predicted temperature field showed the most acceptable distribution.

• 자원환경지질
• /
• 제42권6호
• /
• pp.561-574
• /
• 2009

본 연구에서는 농업지역에서의 양수, 관개, 탈질작용을 고려한 불포화대 및 포화대 지하수 흐름 및 용질이동 모델인 VSFRT2D(Variably Saturated Flow and Reactive Transport model)를 개발하였다. VSFRT2D는 Richards equation을 지하수 흐름 지배방정식으로 이용하며, Thornthwaite 방법을 이용하여 강수가 일어나지 않을 때 지표면 증발산량 계산 절차를 포함하는 새로운 모델을 개발함으로써 기존의 불포화대 모델을 개선하였다. 또한 Monod kinetics에 기반한 생분해 기작을 네 개의 비선형 오염물 거동식과 세 종류의 미생물 거동식을 이용함으로서 탈질작용을 이 모델에 반영하였다. 개발된 모델을 질산성질소로 오염된 홍성 지역의 현장 관측 자료에 적용하였다. 본 연구에서는 강수, 양수, 증발산, 관개, 비료 투여 및 다양한 생분해 과정들이 지하수 흐름 및 오염물 거동에 미치는 효과들을 확인하기 위하여 각각의 과정을 개별적으로 나누어서 수치 모의한 후 각각의 결과를 상호 비교하였다. 수치 모의 결과 이 지역에서의 질산성 질소 농도 변화는 생분해에 의한 영향은 매우 미미하게 나타났다. 반면에 관개에 의한 양수, 강수, 질소 비료 시비에 의해서는 크게 영향을 받았다.