• 자원리싸이클링
• /
• 제31권4호
• /
• pp.34-39
• /
• 2022

본 연구에서는 약 3.5% 구리 함유 폐에칭액으로부터 구리를 회수하기 위한 철 샘플에 따른 시멘테이션 반응 시 초음파 에너지 인가에 의한 반응 속도와 구리 회수율에 미치는 영향을 조사하였다. 그 결과 단순 교반 공정에 비해 시멘테이션 반응이 효과적으로 일어나 같은 시간 대비 높은 구리 회수율을 나타냈다. 단순 교반과 초음파에너지를 가하였을 때를 비교해보면, 25분 반응에 따라 철 샘플 형태가 plate를 사용하였을 때, 약 9.5%가 56.6%로 향상되었으며, chip은 약 14.0%에서 46.1%, powder는 약 41.9%에서 77.2%로 증가하였다. 이는 시멘테이션 반응으로 생성되어 철 표면을 덮고 있던 구리가 탈착되며 연속반응이 유도되었고, 구리 회수율은 약 2배에서 6배까지 증가하였으며, 회수된 구리의 입자 크기 또한 감소하는 경향을 확인할 수 있었다.

• 한국미생물·생명공학회지
• /
• 제23권1호
• /
• pp.104-109
• /
• 1995

The gene responsible for dechlorination of 4-chlorobenzoate (4CBA) was cloned in E. coli XL1-Blue from Pseudomonas sp. DJ-12. The cloned cell of E. coli Cjl had the hybrid pBluescript SK(+) plasmid, into which about 9.5 kb genomic DNA fragment of PseudOmonas sp. DJ-12 was inserted. The subclone of pCJlOl was constructed by inserting the 3.4 kb EcoRI-HindIII fragment of pCJl into the vector. Those cloned cells could be simply selected by halo formation around the colonies which was the precipitate of AgCl produced by reaction of AgNO$_{3}$ and chloride ion liberated by bacterial dechlorination of 4CBA- Such a plate assay method was standardized by the procedure that the colonies grown for 2 days on the Cl$^{-}$-free plate medium containing 1 mM 4CBA were flooded with 0.1 M AgNO$_{3}$ solution.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 추계학술대회 논문집
• /
• pp.287-292
• /
• 2001

Static behaviors of railway plate girder bridges designed by the L-22, a standard load type of the railway specification in Korea, are evaluated by widely eight load cases. The load cases are three real loads, which contain three locomotive types of Saemaul PMC, diesel, and Korea Train Express(KTX), and three design loads, L-22, L-18, and HL-25 loads, in railway specification. Plate girders for analysis have the length of spans of six types：6m, 9m, 12m, 22m, 24m, and 30m. For analysis SAP2000n ,a commercial FEM tool, is used. Dominant axial load types are taken from these results that are maximum deflections, reaction forces, and absolute maximum bending moment in girders.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.201-204
• /
• 2006

A three-dimensional finite element (FEM) model has been developed to simulate the deformation due to bead on plate welding of curved plates with curvature in the weld direction. By using traditional method such as thermal-elastic-plastic FEM, the weld-induced deformation can be predicted accurately. However, this method is not practical approach to analyze the deformation of large and complex structures such as ship hull structures in view of time and cost. This study is classified from the aspect of equivalent load based on inherent strain near the weld line. Therefore, the residual deformation can be simply computed by elastic analysis. Further more, a practical solution is proposed to consider the contact between the plate and the positioning jig by judging the reaction forces of the jig at calculation step and the effect of the longitudinal curvature is closely considered.

• 한국수소및신에너지학회논문집
• /
• 제15권2호
• /
• pp.159-165
• /
• 2004

Fuel cell makes electricity through chemical reaction. Bipolar-plate distribute hydrogen, oxidation using channel geometry condensation of water vapor inside channels of bipolar-plates lowers efficiency of fuel cell. Usually high pressured gas supply is used to solve the water condensation problem with serpentine type channel geometry. In this study, a new channel geometry shows feasible to minimize lowering efficiency due to water condensation through numerical and experimental analysis.

• 한국대기환경학회지
• /
• 제20권6호
• /
• pp.793-801
• /
• 2004

A passive sampler has been developed for measuring formaldehyde in air using methyl yellow and methyl orange indicator. It is based on the color change of the TLC plate on reaction with formaldehyde. TLC plates impregnated with three kinds of solutions containing methyl orange, methyl yellow, mixing of methyl yellow and methyl orange were shown rectilinear response to formaldehyde concentration at constant exposure time. The color change of impregnated TLC plate with criteria air pollution, such as NO$_2$, SO$_2$, CO, $O_3$ was investigated. The color change of TLC plate with $O_3$ is larger than other gases.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• 제20권4호
• /
• pp.355-374
• /
• 2016

This work is devoted to investigate heat and mass transfer effects on MHD natural convection flow past an inclined plate with ramped temperature numerically. The dimensionless governing equations for this investigation are solved by using finite element method. The effects of angle inclination, buoyancy ratio parameter, permeability parameter, magnetic parameter, Prandtl number, heat generation, thermal radiation, Eckert number, Schmidt number, chemical reaction parameter and time on velocity, temperature and concentration fields are studied and presented with the aid of figures. The effects of the pertinent parameters on skin friction, rate of heat transfer and mass transfer coefficients are presented in tabular form. The numerical results are compared graphically with previously published result as special case of the present investigation and results found to be in good agreement.

• 세라미스트
• /
• 제20권4호
• /
• pp.55-73
• /
• 2017

As one of the most versatile semiconductors, zinc oxide (ZnO) with one-dimensional (1-D) nanostructures has been significantly developed for the application of ultraviolet (UV) lasers, photochemical sensors, photocatalysts, and so on. Such 1-D nanowires could be easily achieved due to the anisotropic growth rate along the [0001] direction. However, such typical growth habit leads to decrease the surface area of the (0001) plane, which plays a central role in not only UV lasing action but also photocatalytic reaction. This fact lead us to develop ZnO crystal with enhanced polar surface area through crystal growth control. The purpose of this review is to provide readers a simple route to plate-type ZnO crystal with highly enhanced polar surfaces and their applications for UV-laser, photocatalyst, and antibacterial agents. In addition, we will highlight the recent study on pilot-scale synthesis of plate-type ZnO crystal for industrial applications.

• 반도체디스플레이기술학회지
• /
• 제16권1호
• /
• pp.45-51
• /
• 2017

Poly(urethane acrylate) siloxane oligomers with Interpenetrating polymer netwoked nanoparticles were prepared to synthesize hard coating solution by reaction with diisocyanates. The diisocyanate combined siloxane hard coating solution showed more flexibility than the siloxane solution. In addition, diisocyanate resulted in improvement of curl property and surface hardness in the siloxane solution. Of the used diisocyanates, isophorone diisocyanate and acryloyloxy ethyl diisocyanate were good for UV hard coating solution. This effect will decrease brittleness in the siloxane solution using for plastic display plate.

• 대한수의학회지
• /
• 제29권2호
• /
• pp.11-18
• /
• 1989

This study was undertaken to obtain basic data of the sternal development in Korean native cattle from the earliest sternal formation to the ossification using histological and histochemical methods. Thrity three sterna were collected from a series of embryos and fetuses ranging from 11 to 225mm (estimated age 37~120days) in crown rump length. The bilateral sternal bars were observed in the 2nd group(CRL 21~3mm) of Korean cattle embryos. Those bars initiated to be fused in the 3rd group (CRL 31~4mm) and completed in the 7th group(CRL 71~80mm). The ossification centers were detected in the 8th group(CRL 81~90mm) also bilateral ossification centers were found in the same group. The typical epiphyseal plates, endochondral bone and calcium deposit were found in the 9th group(CRL 91~100mm). Osteocytes, osteoblasts, osteoclasts and myeloid cells appeared in ossification centers in the 10th group(more than CRL 101mm). The alcianophility responded markedly in the 9th group that was decreased and showed slightly positive reaction in territorial matrix of the 10th group. Marked positive reaction to PAS was observed in bony trabeculae in the 10th group. The positive reaction to calcium deposit by trichrome stain was observed initially in the hypertrophied zone of epiphyseal plate in the 9th group and was conspicuous in the calcified zone of epiphyseal plate in the 10th group. The 1st positive reaction to the von Kossa stain was observed in the 9th group.