• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.730-731
• /
• 2015

This paper presents the analysis of the analysis of thrust characteristics of linear induction motors(LIMs) according to secondary reaction plate. LIMs are well known as high speed transport systems, which can obtain thrust directly without gears and links, or auxiliary mechanisms. A simple structure, easy maintenance, and less environmental pollution are advantages of LIMs. In transport systems using LIMs, the secondary reaction plate is an important design factor, because it has considerable impact on the cost of the railway as well as the performance of the LIMs.

• Preventive Nutrition and Food Science
• /
• 제2권3호
• /
• pp.232-235
• /
• 1997

This study was investigated to determine antimutagenic effects of enzymatic browning reaction products (PEBRPs) obtained by reaction of polyphenol compouns with oxidase extracted from potato. Catechol (Ca) PEBRPs showed the strongeest inhibitor effects with 90% inhibition on benzo-($\alpha$)-pyrene(B($\alpha$)P) induced mutagenesis in Salmonella typhimurium TA98, but he least with40% inhibition on the 2-aminofluorene (2-AF) induced mutagenesis in TA98. The strong antimutagenic activities with 80% inhibition were observed in the presence of 100$\mu\textrm{g}$/plate of hydroquinone(HQ)-PEBRP on the B($\alpha$)P or 3-amino-1,4-dimethyl-5H-pyrido[4,3-b]indole(Trp-P-1) induced mutagenesis in TA98, whereas HQ-PEBRP showed the least antimutagenic effect on 2-AF-induced mutagenesis. The addition of 100$\mu\textrm{g}$ hydroxyhydroquinone(HHQ)-PEBRP to the plate led to approximately 82% inhibitory effects on 2-AF or Trp-P-1 induced mutagenesis in TA98, whereas the least antimutagenicity was obsrved in the4-nitroquinoline-1-oxide(4-NQO) induced mutagenesis in the presence of 100$\mu\textrm{g}$/plate of HHQ-PEBRP. More than 80% inhibiton were observed in the presence of 200$\mu\textrm{g}$/plate of Pyrogalol(Py)-PEBRP on the B($\alpha$)P or Trp-P-1 induced mutagenesis in TA98, but the least with 38% inhibition on 4-NQO induced mutagenesis in TA98. The results indicate that enzymatic browing reaction products of potato have a strong modulatory effect on mutagen induced mutagenesis in TA98.

• 대한기계학회논문집
• /
• 제17권7호
• /
• pp.1864-1873
• /
• 1993

A biomechanical approach was carried out to analyze foot-floor reaction forces acting on five male subjects performing a walking task. The task analyzed was walking over an obstacle with the right bare foot. The foot-floor reaction data were measured from a force plate, and then processed using a software developed. The source program was coded in the C language for easier on-line data acquisition and graphic displays. High repeatability was found in the reaction data acquired from three trials by each subject. For obstacle height from 0 to 25 cm, the maximum in reaction force reached up to 1.048 BW in the vertical, 0.174 BW in the anterior-posterior, and 0.054 BW in the medio-lateral components, respectively. A quantity was defined by the difference between two vertical reaction values, and this quantity was found to be proportional to the obstacle height. It was also shown that the whole body motion could be predicted the measured foot-floor reaction data.

• Steel and Composite Structures
• /
• 제29권6호
• /
• pp.771-783
• /
• 2018

In this paper, topology optimization (TO) is applied to find a new configuration for the perforated steel plate shear wall (PSPSW) based on the maximization of reaction forces as the objective function. An infill steel plate is introduced based on an experimental model for TO. The TO is conducted using the sensitivity analysis, the method of moving asymptotes and SIMP method. TO is done using a nonlinear analysis (geometry and material) considering the buckling. The final area of the optimized plate is equal to 50% of the infill plate. Three plate thicknesses and three length-to-height ratios are defined and their effects are investigated in the TO. It indicates the plate thickness has no significant impact on the optimization results. The nonlinear behavior of optimized plates under cyclic loading is studied and the strength, energy and fracture tendency of them are investigated. Also, four steel plates including infill plate, a plate with a central circle and two types of the multi-circle plate are introduced with equal plate volume for comparing with the results of the optimized plate.

• 대한수의학회지
• /
• 제18권2호
• /
• pp.61-67
• /
• 1978

The detection of Bordetella bronchiseptica which is supposed to be an agent of the infectious atrophic rhinitis of swine, is likely to receive more attention in the future as the pork industry comes to realize that eradication of this infection from breeding herds is a practical possibility. Experiments described here were carried out to establish the rapid plate agglutination test for the detection of the infectious atrophic rhinitis of swine in the field using the criteria of antigen preparation, effects on the antigenecity after storing of the antigen and reaction appearing time. Also, the agglutinabilities between the plate and tube method were compared and the degree of pathological lesions were recorded in relation to tube agglutination titers. Obtained results were as follows: 1. No differences were noted in the agglutinabilities on the plate agglutination test between the treatments in antigen preparation-formolized, merthiolate-killed and living organism. 2. The agglutinability of the antigens did not show any significant changes until 10 weeks of storage at 4 C; however, after 10 weeks of storage, non-specific reaction was observed with the HPCD control sera. 3. The results of the plate and tube agglutination tests were not comparable but the effective use of the plate method in Bordetella bronchiseptica eradication programs in pigs especially in the sow is stressed as a screening test.

• 한국정보전자통신기술학회논문지
• /
• 제7권1호
• /
• pp.36-39
• /
• 2014

폐수 속에 들어있는 미생물을 이용해서 전기를 얻을 수 있도록 고안된 것이 미생물 연료전지이다. 본 논문에서는 미생물 연료전지의 전극 재료와 구조에 따른 전기적 특성을 조사했다. 구리판을 캐소드 전극으로 사용한 연료전지는 구리판의 산화 반응에 따른 전압역전현상이 관찰되어 백금판을 전극으로 사용한 연료전지보다 낮은 출력 전압을 나타내었다. 구리판을 전극으로 사용한 경우 전극판의 간격이 작을수록 높은 전압특성을 나타내었고 면적이 넓을수록 최고출력전압이 나타나는 시간이 지연되는 특성을 보였다.

• Structural Engineering and Mechanics
• /
• 제26권1호
• /
• pp.69-86
• /
• 2007

A four-noded plate bending quadrilateral (PBQ4) and an eight-noded plate bending quadrilateral (PBQ8) element based on Mindlin plate theory have been adopted for modeling the thick plates on elastic foundations using Winkler model. Transverse shear deformations have been included, and the stiffness matrices of the plate elements and the Winkler foundation stiffness matrices are developed using Finite Element Method based on thick plate theory. A computer program is coded for this purpose. Various loading and boundary conditions are considered, and examples from the literature are solved for comparison. Shear locking problem in the PBQ4 element is observed for small value of subgrade reaction and plate thickness. It is noted that prevention of shear locking problem in the analysis of the thin plate is generally possible by using element PBQ8. It can be concluded that, the element PBQ8 is more effective and reliable than element PBQ4 for solving problems of thin and thick plates on elastic foundations.

• 전기화학회지
• /
• 제12권1호
• /
• pp.68-74
• /
• 2009

본 연구에서는 탄소성형 분리판의 물리화학적, 전기화학적 특성을 분석하여 수소 및 개미산연료 전지의 성능에 미치는 영향을 알아보았다. 기존 기계가공 탄소분리판과 탄소복합소재 탄소성형 분리판의 접촉저항, 부식특성, 소수성을 비교 평가하였다. 특히, 현재 연구개발 중인 탄소복합소재 성형분리판의 경우 계면접촉저항이 기계가공 분리판보다 1.5배 높게 나타났으며, 내식성 실험에서는 산에 취약하여 분리판 표면이 거칠어지고 결정성이 감소하였다. 연료전지의 성능은 분리판의 계면접촉저항에 크게 영향을 받았으며, 계면저항이 적은 기계가공 분리판이 수소 및 개미산 연료 전지에서 높은 성능을 나타냈다.

• Structural Engineering and Mechanics
• /
• 제9권2호
• /
• pp.127-139
• /
• 2000

The isoparametric element method is used for a plate on non-homogenous foundation. The surface displacement due to a point force acting on the non-homogeneous foundation is the fundamental solution. Based on this analysis, the interaction between the foundation and plate can be determined and the reaction of the foundation can be treated as the external force to the plate. Therefore, only the plate needs to be divided into some elements. The method presented in this paper can be used in cases such as thin or thick plate, different plate shapes, various loading, homogenous and non-homogenous foundations. The examples in this paper show that this method is versatile, efficient and highly accurate.

• Environmental Engineering Research
• /
• 제24권2호
• /
• pp.318-323
• /
• 2019

Paper focuses on comparison between two different orifice plate configurations (plate number 1 and plate number 2) used as cavitating device in the hydrodynamic cavitation reactor for improving pollutant removal efficiencies. Effect of four different parameters such as hydraulic characteristics (in terms of range of flow rates, orifice velocities, cavitation number at different inlet pressures); cavitation number (in range of 5.76-0.35 for plate number 1 and 1.20-0.35 for plate number 2); inlet pressure (2-8 bars) and reaction time (0 to 60 min) in terms of chemical oxygen demand (COD) removal and chlorpyrifos degradation has been studied and compared. Optimum inlet pressure of 5 bars exists for degradation of pollutants for both the plates. It is found that geometry of orifice plate plays important role in removal efficiencies of pollutant. Results obtained confirmed that orifice plate 1 with configuration of 1.5 mm 17 holes; cavitational number of 1.54 performed better with around 60% COD and 98% chlorpyrifos removal as compared to orifice plate 2 having configuration of 2 mm single hole; cavitational number of 0.53 with 40% COD and 96% chlorpyrifos in 2 h duration time.