• Korean journal of applied entomology
• /
• v.14 no.4 s.25
• /
• pp.193-198
• /
• 1975

This experiment was performed to clarify the concentration of rice stripe virus in the rice Plant leaves by serological test, and was attempted to inspect the virus carrier among small brown planthopper by antibody-sensitized hemagglutination test. The antiserum was prepared by injecting intervenously into the external marginal vein of the ear of a rabbit. The precipitin titer of it was 1 : 16. The rough virus fluid prepared from diseased leaves was centrifuged at 10.000 rpm, and then the supernatant solution was treated at $55^{\circ}C$ for 5 minutes and the solution clarified by removing the agglutinate was used as the antigen solution. Antibody-sensitized erythrocyte solution was prepared from sheep erythrocytes sensitized by rice stripe virus with tannic acid, and its agglutination titer was 1 : 512. The virus concentrations in flag leaves or first leaves just below them showing different symptoms was high with progressing the severity of symptoms. And the concentrations of the virus in leaves of varieties of the rice plant showing same degree symptom were lower in suscetible varieties, Sadominori, Palgoeng, Mangyong and Nihonbare, than in the resistant one, Tongil, but in Yooshin which was known as the resistant, lower rather than in Tongil. The reacton of antibody-sensitized hemagglutination test to inspect the virus carrier, was so highly sensitive that this reaction was recognized as a method which is able to Identify the carrier accurately in short time.

• Korean Business Review
• /
• v.19 no.2
• /
• pp.207-230
• /
• 2006

The study which it sees probably is the tourist' from the tourist resort, a emotional response and the change of stay hour and the follows in crowding perceived degree and it examines it does. In order to achieve the purpose of this study, carried out literature study of a related field and set up a study model. We used one method. The first method was directly distributing questionnaires to tourist' by use of one researcher who has been trained in tourist site, in order to confirm hypothesis established according to a theoretical background. And as the site of study, chose Mureung Valley which are located in the East Sea region which is one of the largest domestic vacation destinations. Through these methods, we were able to obtain participation of 450 people from across the country. Using 408 responses(42 responses removed). we derived statistics by means of Win SPSS Version 10.0 statistics program package. The analysis results ara as follows: First, Perceived Crowding affects tourists' Emotional Response and the Stay hour change. Specially, perceived Crowding is from in the Emotional Response factor it is joyful with there is relationship of excitation relationship effect. Second, There is relationship of effect even to sentimental reaction and stay hour change. This also is from in the Emotional Response factor it is joyful with there is relationship of excitation relationship effect. Finally, we discuss the results of analysis and suggest research limitation and future and future study.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.8 no.3
• /
• pp.317-324
• /
• 2020

Plastic wastes generated from domestic waste are separated by mixed discharge with foreign substances, and the cost of the separation and screening process increases, so recycling is relatively low. In this study, as a fundamental study for recycling mixed plastic wastes generated from domestic waste into concrete aggregates, changes in concrete properties according to the plastic waste types and the substitution rate were evaluated experimentally. The mixed plastic waste aggregate(MPWA) was found to have a lower density and a higher absorption rate compared to the coarse aggregate with good particle size distribution. On the other hand, the single plastic waste aggregate(SPWA) was composed of particles of uniform size, and both the density and the absorption rate were lower than that of the fin e aggregate. It was found that the MPWA substitution concrete did not cause a material separation phenomenon due to a relatively good particle size distribution even with the largest amount of plastic waste substitution, and the amount of air flow increased little. The compressive strength and flexural strength of the PWA substitution concrete decreased as the amount of substitution of the PWA increased due to the low strength of the PWA, the suppression of the cement hydration reaction due to hydrophobicity, and the low adhesion between the PWA and the cement paste. It was found that the degree of deterioration in compressive strength and flexural strength of concrete substituted with MPWA having good particle size distribution was relatively small.

• Journal of Periodontal and Implant Science
• /
• v.48 no.1
• /
• pp.34-46
• /
• 2018

Purpose: The purpose of this study was to evaluate the effects of 1,25-dihydroxyvitamin $D_3$ on the proliferation, differentiation, and matrix mineralization of MC3T3-E1 osteoblast-like cells in vitro. Methods: MC3T3-E1 osteoblastic cells and 1,25-dihydroxyvitamin $D_3$ were prepared. Cytotoxic effects and osteogenic differentiation were evaluated using the 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, alkaline phosphatase (ALP) activity assay, ALP staining, alizarin red S staining, and reverse transcription-polymerase chain reaction (RT-PCR) for osteogenic differentiation markers such as ALP, collagen type I (Col-I), osteocalcin (OCN), vitamin D receptor (VDR), and glyceraldehyde 3-phosphate dehydrogenase. Results: The MTT assay showed that 1,25-dihydroxyvitamin $D_3$ did not inhibit cell growth and that the rate of cell proliferation was higher than in the positive control group at all concentrations. ALP activity was also higher than in the positive control group at low concentrations of 1,25-dihydroxyvitamin $D_3$ ($10^{-10}$, $10^{-12}$, and $10^{-14}M$). RT-PCR showed that the gene expression levels of ALP, Col-I, OCN, and vitamin D receptor (VDR) were higher at a low concentration of 1,25-dihydroxyvitamin $D_3$ ($10^{-12}M$). Alizarin red S staining after treatment with 1,25-dihydroxyvitamin $D_3$ ($10^{-12}M$) showed no significant differences in the overall degree of calcification. In contrast to the positive control group, formation of bone nodules was induced in the early stages of cell differentiation. Conclusions: We suggest that 1,25-dihydroxyvitamin $D_3$ positively affects cell differentiation and matrix mineralization. Therefore, it may function as a stimulating factor in osteoblastic bone formation and can be used as an additive in bone regeneration treatment.

• Tuberculosis and Respiratory Diseases
• /
• v.57 no.1
• /
• pp.25-31
• /
• 2004

Background : IFN-${\gamma}$ is the main effector mediator of the host immune response against Mycobacterium tuberculosis. Evaluating the IFN-${\gamma}$ gene expression in response to M. tuberculosis antigens may help in elucidating the host defense mechanism against M. tuberculosis and in the development of a vaccine. Methods : The IFN-${\gamma}$ mRNA expression in the lymphocytes obtained from pleural effusions from tuberculous pleurisy patients (TB-PLC) after in vitro stimulation with whole cell M. tuberculosis(H37Rv), purified protein derivatives(PPD), man-lipoarabinamman (man-LAM), ara-LAM and Antigen 85B(Ag85B) were evaluated. The degree of IFN-${\gamma}$ mRNA expression was determined by a semiquantitative reverse transcriptase-polymerase chain reaction (RT-PCR) method. Results : M. tuberculosis induced the expression of IFN-${\gamma}$ mRNA in the TB-PLC in time and dose dependent manners. The PPD and Ag85B induced high levels of IFN-${\gamma}$ mRNA expression in the TB-PLC. However, man-LAM inhibited IFN-${\gamma}$ mRNA expression in the TB-PLC, while ara-LAM did not. Conclusion : IFN-${\gamma}$ mRNA expression in TB-PLC is stimulated by PPD and Ag85B, but inhibited by man-LAM.

• Korean Chemical Engineering Research
• /
• v.53 no.3
• /
• pp.372-381
• /
• 2015

The effect of preparation method on the catalytic activities of the $Ni/Al_2O_3$ catalysts on steam reforming of ethylene glycol was investigated. The catalysts were prepared with various preparation methods such as an incipient wetness impregnation, wet impregnation, and coprecipitation method. In the case of coprecipitation method, various precipitants such as KOH, $K_2CO_3$, and $NH_4OH$ were compared. The prepared catalysts were characterized by using $N_2$ physisorption, inductively coupled plasma-atomic emission spectroscopy, X-ray diffraction, temperatureprogrammed reduction, pulsed $H_2$ chemisorption, temperature-programmed oxidation, scanning electron microscopy, and thermogravimetric analysis. Among the catalysts reduced at 773 K, the $Ni/Al_2O_3$ catalyst prepared by a coprecipitation with KOH or $K_2CO_3$ as precipitants showed the best catalytic performance. The preparation method affected the particle size of Ni, reducibility of nickel oxides, catalytic performance (activity and stability), and types of coke formed during the reaction. The $Ni/Al_2O_3$ catalyst prepared by a coprecipitation with KOH showed the increasing catalytic activity with an increase in the reduction temperature from 773 to 1173 K because of an increase in the reduction degree of Ni oxide species even though the particle size of Ni increased with increasing reduction temperature.

• Korean Chemical Engineering Research
• /
• v.50 no.2
• /
• pp.371-378
• /
• 2012

Hydrophilic silica nanoparticles (SNPs) were treated by using 3-glycidoxypropyltrimethoxy silane (GPTMS) and then they were blended with polyurethane-urea (PUU) emulsions to obtain SNPs/PUU nanocomposite films. Thermo-mechanical properties of the nanocomposite films were investigated by varying the grafted amount of GPTMS onto SNPs and the contents of SNPs in the PUU matrix. The thermo-mechanical properties of the nanocomposite films were also compared in terms of the dispersibility of SNPs in the PUU matrix and thermal curing of the GPTMS-grafted SNPs. The maximum amount of grafted GPTMS was $1.99{\times}10^{-6}\;mol/m^2$, and which covered ca. 53% of the total SNP surface area. $^{29}Si$ CP/MAS NMR analyses with the deconvolution of peaks revealed the details of polycondensation degree and patterns of GPTMS in the surface modification of SNPs. The surface modification did not significantly affect colloidal stability of the SNPs in aqueous medium; however, the hydrophobic modification of SNPs offered a favorable effect on the dispersibility of SNPs in the PUU matrix as well as better thermal stability. XRD patterns revealed that GPTMS-grafted SNPs broadened the reduced the characteristic peak of polyol in PUU matrix. The composite films became rigid and less flexible as the SNP content increased from 5 wt.% to 20 wt.%. Particularly, Young's modulus and tensile modulus significantly increased after the thermal curing reaction of the epoxy groups in the SNPs.

• Journal of Digital Convergence
• /
• v.12 no.10
• /
• pp.577-585
• /
• 2014

The cosmetic and stimulating effects of lemon oil have been widely proven in the fields of beauty therapy and psychology therapy. But the lemon oil's proper effects on the anti asthma and the anti inflammation have not rarely been verified. This study was conducted to find out the lemon oil's effects on the anti asthma and anti inflammation in the OVA-induced allergic asthma mice model. OVA-induced allergic asthma mice were divided into 4 groups consisting of normal group, control group, positive control group and experimental group. 0.3% of lemon oil was nebulized to experimental group for 3 weeks on a basis of 3 times per week and 30 min each time. After 6 weeks from the initial experiment, the degree of hyper activeness of respiratory system, the hematological change, the amount of the cytokein in serum, the change of airway organization were evaluated. The results showed that lemon oil controled effectively the hyper activeness of respiratory system and restricted the multiplication of cells in acidophil in terms of statistical significance. It also turned out that lemon oil restricted effectively the infection of airway reaction and the hyper sensitiveness of respiratory system by controlling the creation of histamine(cytokein) and IgE.

• Elastomers and Composites
• /
• v.37 no.1
• /
• pp.21-30
• /
• 2002

Core-shell polymers of methyl methacrylate/styrene pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl benzene sulfonate(SDBS) as an emulsifier using ammonium persulfate(APS) as an initiator. The characteristics of these core-shell polymers were evaluated. Core-shell composite latex has the both properties of core and shell components in a particle, where as polymer blonds or copolymers show a combined properties from the physical properties or two homopolymers. This unique behavior of core-shell composite latex can be used in many industrial fields. However, in preparation of core-shell composite latex, several unexpected phenomina are observed, such as, particle coagulation, low degree of polymerization, and formation of new particles during shell polymerization. To solve the disadvantages, we studied the effects of surfactant concentrations, initiator concentrations, and reaction temperature on the tore-shell structure or PMMA/PSt and PSt/PMMA. Particle size and particle size distribution were measured by using particle size analyzer, and the morphology of the core-shell composite latex was observed by using transmission electron microscope. Glass transition temperature($T_g$) was also measured by using differential scanning calorimeter. To identify the core-shell structure, pH of the composite latex solutions were measured.

• The Journal of Korean Academy of Prosthodontics
• /
• v.44 no.1
• /
• pp.1-9
• /
• 2006

Purpose: The purpose of this study was to evaluate the efficacy and substitute possibility of a newly developed flowable composite resins as a luting cement for translucent fiber post. Material & Method: Two kinds of 12 mm translucent fiber Post (D.T. Light-Post (Bisco, USA) and FRC Postec (Ivoclar vivadent, Liechtenstein) was inserted into the teflon mold (7 mm diameter, 9 mm long) and Filtek-Flow (3M ESPE. USA), a light activated flowable composite resin, was polymerized for 60 seconds through the post. Also, the post was cut from the tip to 9 mm, 6 mm, 3 mm, and Filtek-Flow was light cured according to each length. For comparison, 60 seconds light-cured and 24 hours self-cured two dual cured resin cement (Duo-cement (Bisco, USA) and 2 Panavia-F (Kuraray, Japan)) samples were prepared as control group. Also cavities (1 mm in width, 1 mm in depth and 12 mm in length) were prepared using acrylic plate and aluminum bar, and flowable composite resin was flied and light cured by the diffused light from the fiber post's side wall. The degree of polymerization was measured according to the distance from curing light using Vickers' hardness test. Result: Within the limitation of this study, the following conclusions were drawn: 1. Vickers' hardness of light cured dual cured resin cement and flowable composite resin decreased from Panavia-F, Filtek-Flow and Duo-cement accordingly (p<0.05). In the dual curing resin cement, light curing performed group showed higher surface hardness value than self cured only group (p<0.05). 2. Surface hardness ratio (light cured through fiber post /directly light cured) of D.T. Light-Post using Filtek-Flow showed about 70% in the 6 mm deep and about 50% in the 12 mm deep FRC Postec showed only 40% of surface hardness ratio. 3. Surface hardness ratio by diffused light from the post's side wall showed about 50% at 6 mm and 9 mm deep, and about 40% at 12 mm deep in D.T. Light-Post. However, FRC Postec showed about 40% at 6 mm deep, and almost no polymerization in 9 mm and 12 mm deep.