• The Korea Journal of Herbology
• /
• v.30 no.6
• /
• pp.39-46
• /
• 2015

Objectives : The aim of this study was to evaluate the effect of Schizonepeta Spica water extract (SS) on the OVA-induced BLAB/c mice allergic rhinitis model.Methods : Thirty two BALB/c mice were equally assigned to 4 groups; the sham group, the control group, the cetirizine hydrochloride (Cet) treatment group, and the SS treatment group. Sham group was sensitized and challenged with saline, and the other groups were sensitized and challenged with OVA. The dosage of SS was 7.6 mg /kg·day, and Cet was 10 mg/kg·day. Nasal rubbing and sneezing were measured by the behavior observation. The concentrations of IL-1β, IL-10, TNF-α and MIP-2 in the sera of allergic rhinitis model were measured by mouse cytokine/chemokine magnetic bead panel kits. Total IgE and OVA-specific IgE were measured by ELISA method. Epithelial thickness and eosinophil infiltration of nasal septum was investigated by histological examination.Results : The clinical symptoms that increased in control group were significantly reduced in SS-treated group. Serum total IgE and OVA-specific IgE in the SS-treated group were significantly reduced compared to the control group. The concentration of IL-1β, IL-10, TNF-α and MIP-2 in SS-treated group showed a significant reduction compared to the control group. The infiltration of eosinophil into nasal tissues of SS-treated group decreased markedly compared to control group, and thickness of nasal septum in nasal mucosa showed a significant reduction compared to control group.Conclusions : According to the above result, it is suggested that SS may inhibit the early and late phase of allergic rhinitis reaction.

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.38-45
• /
• 2011

The complexation behavior of the $\alpha$-ketostabilized phosphorus ylides $Ph_3P$=CHC(O) $C_6H_4-X$ (X=Br, Ph) towards the transition metal ions mercury (II) and Silver (I) was investigated. The mercury(II) complex {$HgX_2$ [Y]} 2 ($Y_1$=4-bromo benzoyl methylene triphenyl phosphorane; X=Cl(1), Br(2), I(3), $Y_2$=4-phenyl benzoyl methylene triphenyl phosphorane; X=Cl(4), Br(5), I(6)) have been prepared from the reaction of $Y_1$ and $Y_2$ with $HgX_2$ (X=Cl, Br, I) respectively. Silver complexes [$Ag(Y_2)_2]$ X(X=$BF_4$(7), OTf(8)) of the $\alpha$-keto-stabilized phosphorus ylides ($Y_2$) were obtained by reacting this ylide with AgX (X=$BF_4$, OTf) in $Me_2CO$. The crystal structure of complexes (1) and (4) was discussed. These reactions led to binuclear complexes C-coordination of ylide and trans-like structure of complexes $[Y_1HgCl_2]_2$. $CHCl_3$ (1) and $[Y_2HgCl_2]_2$ (4) is demonstrated by single crystal X-ray analyses. Not only all of complexes have been studied by IR, $^1H$ and $^{31}P$ NMR spectroscopy, but also complexes 1-3 have been characterized by $^{13}$CNMR.

• Journal of the Korean Chemical Society
• /
• v.33 no.1
• /
• pp.37-45
• /
• 1989

Voltammetric behavior of alkylammonium ion was studied in the absence and in the presence of crown ether in propylene carbonate as solvent. The peak potentials and the peak currents, their dependency on the concentrations, the reversibility of the electrode reactions are described. In the presence of crown ether chemical reaction might be preceeded before the electron-transfer process, the peak potential for the reduction shifts at the negative direction as the concentration of crown ether to the electrolyte solution increases. The addition of crown ether(20mM 18CR6)to the electrolyte solution made it possible to determine voltammetrically the dialkylammonium ions($Me_2NH^{+}_{2};O.6{\sim}0.8mM$) in the presence of the monoalkylammonium ions ($EtNH^{+}_{3} ;1.6mM$) and the monoalkylammonium ions ($EtNH^{+}_{3} ; 0.5{\sim}2.5mM$) in the presence of the dialkylammonium ions($Me_2NH^{+}_{2};0.5mM$)

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.228-234
• /
• 1984

A partial hydrolysis of soybean protein isolate was carried out by using pepsin and trypsin. The degree of hydrolysis was evaluated by chemical analysis, viscometric measurements and gel electrophoresis. The functional properties of the hydrolyzates such as flow behavior, emulsion properties and foaming properties were evaluated. A selective hydrolysis of 11S protein fraction by pepsin was observed from the SDS-PAG electrophoresis. The changes in the molecular weight distribution by different conditions of enzyme hydrolysis were evaluated. The changes in the intrinsic viscosity of the protein hydrolylate by reaction time were highly correlated to the contents of TCA soluble protein and 0.03 M $CaCl_2$ soluble nitrogen. The degree of hydrolysis ($DH_{TCA}$, $DH_{Ca}$) were used to evaluate the effect of enzyme treatment on the functional properties of the hydrolyzate. The apparent viscosity and emulsion capacity and stability of the protein solution decreased as DH increased, while the foaming capacity increased linearly with the increasing DH.

• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.172-177
• /
• 2010

This study reports the high-temperature oxidation kinetics, ASR(area specific resistance), and interfacial microstructure of metallic interconnects coated with conductive oxides in oxidation atmosphere at $800^{\circ}C$, The conductive material LSC($La_{0.8}Sr_{0.2}CoO_3$, prepared by Solid State Reaction) was coated on the Crofer22APU. The contact behavior of coating layer/metal substrate was increased by sandblast. The electrical conductivity of the LSC coated Crpfer22APU was measured by a DC two probe four wire method for 4000hr, in air at $800^{\circ}C$. Microstructure and composition of the coated layer interface were investigated by SEM/EDS. These results show that a coated LSC layer prevents the formation and growth of oxide scale such as $Cr_2O_3$ and enhances the long-term stability and electrical performance of metallic interconnects for SOFCs.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.3
• /
• pp.247-260
• /
• 2010

The developement of a HLW disposal canister is under way in KAERI using Cold Spray Coating technique. To estimate corrosion behavior of a cold sprayed copper, a creivice corrosion test was conducted at Southwest Research Institute(SWRI) in the United State. For the measurement of repassivation potential needed for crevice corrosion, three methods such as (1) ASTM G61-86 : Cyclic Potentiodynamic Polarization Measurements, (2) Potentiodynamic Polarization plus intermediate Potentiostatic Hold method, and (3) ASTM G192-08 (THE method) : Potentiodynamic- Galvanostatic-Potentiostatic Method, were introduced in this report. In the crevice corrosion test, the occurrence of corrosion at crevice area was optically determined and the repassivation potentials were checked for three kind of copper specimens in a simulated KURT underground water, using a crevice former dictated in ASTM G61-86. The applied electrochemical test techniques were cyclic polarization, potentiostatic polarization, and electrochemical impedance spectroscopy. As a result of crevice corrosion tests, every copper specimens including cold sprayed one did not show any corrosion figure on crevice areas. And the open-cell voltage, at which corrosion reaction initiates, was influenced by the purity of copper, but not their manufacturing method in this experiment. Therefore, it was convinced that there is no crevice corrosion for the cold sprayed copper in KURT underground environment.

• Resources Recycling
• /
• v.18 no.1
• /
• pp.22-29
• /
• 2009

To design and construct a moving bed stoker incinerator for incineration treatment of the domestic oil fly ash, operating condition and moving bed area of incinerator were determined by performing incinerate experiment of the oil fly ash in the muffle furnace which simulates moving bed stoker incinerator in all conditions. Incineration process of the oil fly ash could be divided into 3 stages, every stage needs the appropriate operating condition for effective incineration. The optimum content of water in the heavy oil fly ash was found to be 20 wt% to prevent the ash from flying and reduce the volume. Science combustion rate of oil fly ash depends on the oxygen content, the incinerator must have a equipment to control the oxygen content in the combustion air. The optimum temperature was $750{\sim}800^{\circ}C$ in order to prevent adhesion to the stocker and evaporation of metal compounds of low melting point. Uniform combustion reaction and acceleration of combustion rate required agitation during the combustion of oil fly ash. The incineration rate was $12.53kg/m^2hr$ and the working area of moving bed incinerator was found to be $60m^2$ to incinerate 18 tons of oil fly ash per day.

• Journal of Korean Society of Steel Construction
• /
• v.23 no.4
• /
• pp.429-438
• /
• 2011

In this study, the explicit numerical algorithm was proposed to simulate the stress erection process and ultimate-load analysis of the strarch (stressed arch) system. The strarch system is a unique and innovative structural system and member prestress comprising prefabricated plane truss frames erected through a post-tensioning stress erection procedure. The flexible bottom chord, which has sleeve and gap details, is closed by the reaction force of the prestressing tendon. The prestress imposed on the tendon will enable the strarch system to be erected. This post-tensioning process is called "stress erection process." During this process, plastic rigid-body rotation occurs to the flexible top chord due to the excessive amount of plastic strain, and the structural characteristic is unstable. In this study, the dynamic relaxation method (DRM) was adopted to calculate the nonlinear equilibrium equation of the system, and a displacement-based finite-element-formulated filament beam element was used to simulate the nonlinear behavior of the top chord sections of the strarch system. The section of the filament beam element was composed by the amount of filaments, which can be modeled by various material models. The Ramberg-Osgood and bilinear kinematic elastic plastic material models were formulated for the nonlinear material behaviors of the filaments. The numerical results that were obtained in the present study were compared with the experiment results of the stress erection and with the results of the ultimate-load analysis of the strarch unit frame. The results of the present studies are in good agreement with the previous experiment results, and the explicit DRM enabled the analysis of the post-buckling behaviors of the strarch unit frame.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.39 no.1 s.119
• /
• pp.16-24
• /
• 2007

This study was performed to investigate the reaction between alkylketene dimer(AKD) and cellulose molecules in AKD-sized paper sheet. AKD was added to highly beaten($80{\pm}3^{\circ}SR$) SwBKP(ca. 0.8% on pulp) in order to have much AKD retention in the paper sheet. This AKD-sized paper sheet was aged at different temperatures, $60^{\circ}C,\;80^{\circ}C,\;105^{\circ}C\;and\;125^{\circ}C$. Changes in FT-IR spectra of AKD in paper sheet during the ageing were measured. In addition, sizing degrees of the AKD-sized paper sheet pretreated for 30 sec. at $105^{\circ}C$ were measured by HST size tester during the storage at different temperature. IR spectra of AKD-sized paper sheet preheated at $105^{\circ}C$ for 30 sec. showed unchanged spectra two absorption bands at $1849cm^{-1}\;and\;1722cm^{-1}$ which refer to the typical AKD IR bands. However, these typical AKD bands were gradually reduced with increasing ageing, completely disappeared after 6 hrs. and formed new absorption band at $1706cm^{-1}$, which refers to carbonyl stretching vibration of dialkylktone. Eventually the AKD molecule was hydrolyzed to diakylketone without formation of ${\beta}$-ketoester with cellulose in paper sheet. After 6 days ageing, a little amount of ${\beta}$-ketoester bands was identified in 6 or 7 days ageing, because of the absence of water due to long-term heating. The same tendency was observed at different ageing conditions. At the practical papermaking process, AKD reacts prevailing with water, and mostly seems to be hydrolyzed to dialkylketene. Concerned to the sizing development, AKD-sized paper sheet was shown no sizing development at the initial stage of ageing at $60^{\circ}C$ after heating treatment at $105^{\circ}C$ for 30 sec., and gradually increased the sizing degree with increasing ageing, such as Hercules Sizing Tester (HST) 130 see for 12 hr, HST 300 sec. for 3 days and HST 400 sec. for 5 days. It was concluded that hydrolyzed AKD could contributed to the sizing development of the paper sheet.

• Journal of fish pathology
• /
• v.13 no.2
• /
• pp.121-127
• /
• 2000

From August to October 1998, over 60% mortality of cultured striped beakperch Oplegnathus fasciatus was occurred in net cages along the southern coast of Korea. Moribund fish showed some clinical signs of lethargic behavior, dark coloration or decoloration, severe gill anemia and enlargement of spleen. Also enlarged basophilic cells showing Feulgen -positive reaction were observed in the tissue section of spleen, kidney, liver and heart of the diseased fish. GF cells inoculated with spleen homogenate of diseased fish produced cytopathic effect of enlarged and rounded cells, therefore the causative virus was isolated from diseased fish. Striped beakperch fingerlings intraperitoneally inoculated with the causative virus ($10^4TCID_{50}$/0.1 ml) revealed symptoms similar to those of naturally infected fish and died from 7 to 14 days post injection. Transmission electron microscopy revealed that the causative virus was enveloped icosahedral particle with 120~130 nm in diameter. PCR products of the expected size (500 bp) were amplified with a primer set based on the ATPase gene of RSIV(red sea bream iridovirus) using template DNAs which were extracted from the spleen of diseased fish and GF cells inoculated with the causative virus. According to the analysis of nucleotide sequence of these PCR products, the sequence from ATPase cDNA gene of the causative virus showed 95% homology with that of RSIV. These results indicate that the mass mortality in the cultured striped beakperch was caused by the infection of iridovirus similar to RSIV.