• 대한의생명과학회지
• /
• 제11권1호
• /
• pp.63-69
• /
• 2005

We investigated the changes of fibrinolytic and antioxidative activities of wild or cultivated Codonopsis lanceolata, which were packed in woven polypropylene (WP) film or low density polyethylene (LDPE) film and stored for 0, 15, and 30 days at refrigerated $(2\~4^{\circ}C)$ or room $(l8\~20^{\circ}C)$ temperature (So we have 16 samples, and wrote them as the abbreviated words such as W-WP-RE-15, W-WP-RO-15, W-LDPE-RE-15, W-LDPE-RO-15, W-WP-RE-30, W-WP-RO-30, W-LDPE-RE-30, W-LDPE-RO-30, C-WP-RE-15, C-WP-RO-15, C-LDPE-RE-15, C-LDPE-RO-15, C-WP-RE-30, C-WP-RO-30, C-LDPE-RE-30, C-LDPE-RO-30). Fibrinolytic activity of fresh Codonopsis lanceolata cultivated in the mountain or field were 0.8 unit (plasmin unit/ml) or 7.3 units, respectively. In descending order, the activities of wild Codonopsis lanceolata stored for 15 days were as followed; LDPE-RE (0.70 unit), WP-RO (0.52 unit), WP-RE (0.45 unit), and LDPE-RO (0.30 unit). After 30 days, fibrinolytic activities of them decreased to 0.47 unit (LDPE-RE), 0.28 unit (WP-RO), 0.21 unit (WP-RE), and 0.30 unit (LDPE-RO). Considering from the point of fibrinolytic activity, the optimal storage condition of wild Codonopsis lanceolata was packing with LDPE film and storing at $4^{\circ}C$. The change of fibrinolytic activities of Codonopsis lanceolata cultivated in the field revealed the similar trend as wild samples, but the fibrinolytic activities of 30 days-stored samples were maintained better than the wild Codonopsis lanceolata. Fibinolytic activity of wild Codonopsis lancealata was increased by heating for 5 min at $100^{\circ}C$ and decreased by addition of NaCl. Antioxidative activities of Codonopsis lanceolata were also compared from the electron donating activity. Fresh Codonopsis lanceolata had about $70\%$ of electron donating activity. Independent of cultivation area, electron donating activity dropped to $19\~74\%$ (wild Codonopsis lanceolata) and $27\~59\%$ (cultivated Codonopsis lanceolata) during 15 days storage. But after 30 days storage, we obtained the unexpected results, which meant that the activities were higher activities than 15 days-stored samples or even though the fresh samples. In general, Codonopsis lanceolata could maintain antioxidative activities most strongly with LDPE film and chilled condition.

• 한국가스학회지
• /
• 제18권2호
• /
• pp.16-20
• /
• 2014

본 논문에서는 현재 캠핑 문화의 확산에 따라 수요가 증가하는 LGP 재충전 용기에 관한 내압성능을 실험적으로 검증하였다. 겨울철에 부탄가스는 높은 비점의 영향으로 기화가 쉽게 일어나지 않는 물적 특성을 지니고 있다. 하지만 프로판의 경우 비점이 낮아 겨울철에도 기화가 쉽게 일어나 연료로써 공급 필요성이 증가되고 있다. 하지만 프로판은 높은 증기압으로 인해 많은 안전상의 문제가 존재하며, 이를 극복하고 연로로써 유통되기 위해서는 안전한 용기의 공급이 우선시 되어야 한다. 국내외적으로 고압용 소형 재충전 용기의 보급을 시도하고 있으나, 프로판의 높은 증기압으로 인한 안전상의 문제로 제재가 되고 있다. 본 논문은 재충전 용기의 내압성능을 검증하기 위해 수압장치를 이용하여 용기의 가압 및 파열 실험을 수행하였다. 또한 고온에서 프로판의 증기압과 용기 파열시 수압과 비교하여 그 특성을 제시하였다. 수압가압 실험 및 파열 실험을 통해 토출 된 본 논문의 결과는 향후 소형 재충전 용기 개발 연구의 기초가 될 것으로 기대하며, 재충전 용기의 보급에 있어 기준 자료로 활용 될 것으로 사료된다.

• 한국정보통신학회논문지
• /
• 제26권9호
• /
• pp.1367-1373
• /
• 2022

본 논문에서는 셀프리 다중안테나 네트워크에서 하위 성능 사용자의 주파수 효율을 증대시키기 위한 전력 재할당 기법을 고려한다. AP(Access Point)는 사용자의 대규모 페이딩(large-scale fading) 채널 정보를 이용해 채널 세기에 비례하여 전력을 할당하여 전체 네트워크의 전력효율을 극대화한다. 다음으로 AP는 하위 성능 사용자의 주파수 효율을 증가시키기 위해 할당전력 중 임계비율 이상의 전력을 할당받은 사용자의 전력을 임계비율과 같아지도록 줄이고, 회수한 전력을 채널이 가장 나쁜 사용자에게 추가로 할당한다. 시뮬레이션을 통해 전력 재할당 기법을 통해 증가시킬 수 있는 하위 성능 사용자의 주파수 효율을 정량적으로 검증한다.

• Kyungpook Mathematical Journal
• /
• 제60권2호
• /
• pp.319-334
• /
• 2020

We propose a mathematical model with Holling type II functional response, to study the dynamics of vaccination. In order to make our model more realistic, we have incorporated the recruitment of infected individuals as a continuous process. We have assumed that vaccination cannot be perfect and there is always a possibility of re-infection. We have obtained the existence of a disease free and endemic equilibrium point, when the recruitment of infective is not considered and also obtained the existence of at least one endemic equilibrium point when recruitment of infective is considered. We have proved that if R_v < 1, disease free equilibrium is locally asymptotically stable, which leads to the elimination of the disease from the population. The persistence of the model has also been established. Numerical simulations have been done to establish the results obtained.

• 대한치과보철학회지
• /
• 제35권2호
• /
• pp.277-295
• /
• 1997

After clinical adjustment of dental casting restoration, re-polishing procedure is recommanded because the smooth gold sureface is lost. But there is the possibility to get more loose contact than that intended by loss of gold alloy according to the kinds of polishing materials and polishing time. Therefore in this study I polished type II gold alloy with 390gm force, 20,000rpm speed, and 8 kinds of gold alloy polishing materials, fabricated by 4 companies and then measured the amount of loss of gold alloy with Surfcorder SEF-30D and observed alloy surfaces polished by 3 brown rubber points with SEM. The amount of loss of gold alloys polished with 8 kinds of polishing materials and the degree of smoothness of gold alloys according to polishing time and polishing materials were compared. The following results were obtained : 1. When the amount of loss of gold alloys polished with 3 kinds of brown rubber point was compared, Alphalex brown point had the most amount of alloy loss, followed in decreasing order by Shofu brown point and Eveflex brown point. There was statistically significant difference in the amount of alloy loss according to polishing materials. 2. When the amount of loss of gold alloys polished with 5 kinds of green rubber point was compared, Shofu green point had the most amount of alloy loss, followed in decreasing order by Alphaflex green point, Dedeco green clasp polisher, and Eveflex green point. There was statistically significant difference in the amount of alloy loss according to polishing materials except Alphaflex green point and Dedeco green clasp polisher. 3. When the amount of loss of gold alloys polished with all kinds of rubber point was compared, there was no significant difference in Eveflex brown point, Alphaflex green point, and Dedeco green clasp polisher. 4. When average amount of alloy loss per 1 revolution by polishing materials was compared, Alphalex brown point had the greatest value as $0.329{\mu}m$ and Shofu supergreen point had the lowest value as $0.022{\mu}m$. 5. When the degree of sureface smoothness of gold alloy polished with 3 kinds of brown rubber point was compared, In Alphalex brown point surface roughness was completely lost after 20 seconds polishing time, in Shofu brown point 30 seconds, in Eveflex brown point 40 seconds. But in every gold alloys fine scratch formed by rubber points was observed. Based on the results of this study, as rubber polishing materials used in polishing of dental casting restoration after clinical adjustment influenced on the tightness of occlusal or proximal contact, we should make dental casting restoration with minimum error through careful laboratory procedure and form very smooth surface of restoration with tripoli and rouge after use of silicone polishing materials.

• Nuclear Engineering and Technology
• /
• 제53권11호
• /
• pp.3790-3797
• /
• 2021

Although the individual channel readout method can improve the performance of PET detectors with pixelated photo-sensors, such as silicon photomultiplier (SiPM), this method leads to a significant increase in the number of readout channels. In this study, we proposed a novel multiplexing method that could effectively reduce the number of readout channels to reduce system complexity and development cost. The proposed multiplexing circuit was designed to generate bipolar pulses with different zero-crossing points by adjusting the time constant of the high-pass filter connected to each channel of a pixelated photo-sensor. The channel position of the detected gamma-ray was identified by estimating the width between the rising edge and the zero-crossing point of the bipolar pulse. In order to evaluate the performance of the proposed multiplexing circuit, four detector blocks, each consisting of a 4 × 4 array of 3 mm × 3 mm × 20 mm LYSO and a 4 × 4 SiPM array, were constructed. The average energy resolution was 13.2 ± 1.1% for all 64 crystal pixels and each pixel position was accurately identified. A coincidence timing resolution was 580 ± 12 ps. The experimental results indicated that the novel multiplexing method proposed in this study is able to effectively reduce the number of readout channels while maintaining accurate position identification with good energy and timing performance. In addition, it could be useful for the development of PET systems consisting of a large number of pixelated detectors.

• 융합보안논문지
• /
• 제23권4호
• /
• pp.101-108
• /
• 2023

군 조직은 타 조직에 비해 엄격한 계급으로 구성되어 있고, 다른 분야의 공무원들에 비해 은퇴하는 연령이 낮은 편이다. 경제의 급격한 변화와 실업률이 높은 사회에서 개인의 긍정적인 강점을 향상시켜 스스로 자기 관리를 할 수 있도록 심리적 자원을 마련하는 것은 구직활동 뿐만 아니라 삶 전체에 걸쳐 매우 중요한 일이다. 따라서 사회의 변화에 대응하기 위해 긍정적인 자원의 강점을 중요시하고, 이러한 관점에서, 생산성 향상에 기여한다는 긍정심리자본과 취업, 생산성에 관한 다각적인 연구가 시도되고 있다. 본 연구에서는 제대군인의 긍정심리자본이 재취업 의지에 미치는 영향에 대해 전역자를 대상으로 설문을 통해 조사하여 연구를 실시하였다. 그 결과 재취업 의지의 희망과 자기효능감, 복원력, 낙관주의 순으로 영향을 미치는 것으로 분석되었다.

• 복식
• /
• 제32권
• /
• pp.293-312
• /
• 1997

Deconstructionism is a philosophical stream in the latter half of 20'th century which goes against western metaphysics and tries to deconstruct the dualism e.g. eastern/west-ern man/woman. Its main concepts are 'indi-vidual' 'other' 'difference' 'restoration of the repressed' 'decentralization' 'Today it shows strong influences in literature art, and other social fields. This study investigated inner meanings and exterior forms represented in clothing on the base of Jacques Derrida's theory in order to re-search modes of deconstruction in is. And it compared clothing with architecture among other genres of art in order to discover similarities between through and modes of art in a certain period. For illuminating concept of deconstruction I referred to the literatures of preceding studies and for deconstruction's characteristics in both clothing and architec-ture I referred work's collection book $\ulcorner$collec-tions$\lrcorner$ and other related books dealing from 1960's to this point. As a rsult there are four modes of decons-truction in both clothing and architecture as follows; 1) Differenance which is a concept of the dif-ference in time and space as being trace. 2) In termeaning of meanings which is not present in reality but re-interpreted a new in the future. 3) Interxtuality in which a texte is not alone but with others 4) Dis.De phenomenon in which distortion and fragmentation forms occur as the result of the denial of perfection and reson. There are characteristics of modes of de-construction in clothing as follows; 1) Differance; R.Gigli, P. Rabanne. G.Bersace, V.Westwood are representatives of the cloth-ing which is combined with the past the pres-ent and the future or is re-viewed as the clothing of the past in the present point of view. J. Watanabe R. Dawakubo I miyake are representatives of the clothing which is out-date but re-viewed in the sense of recollec-tion and re-usage. 2) Intermeaning of meanings: R. kawakubo I, Miyake Y,Yamamoto are representatives of the clothing which is incomplete but re-interpreted in the future and appears to be new-fashioned according to ways of bnding wearing throwing on and tying J.C. Castel-bajac K.Hamnett S.Sprouse are representa-tives of the clothing which is made up of ab -stract forms scribbling or symbolic letters which appears to be different according to view-point of observers. 3) Intertextuality ;J.P.Gaultier K.Hamnett, Comme des Gar ons are representatives of intertextuality of gender which avoids the 여-ality of man/woman J.P Gaultier G,Versace J. galliano are representatives of the intertex-tuality of time place and occasion which mixes temporality extensity and purposiveness. J.P Gaultier G,Versace are representatives of the intertextuality of coordination which combines items different in image purpose and use. P.Rabanne A,Courr ges R,Gernreic I,Miyake are representatives of the intertextuality of mat-ter which uses heterogeneous matter different from cloth. 4) Dis.De-phenomenon: R, Kawakubo I.Mi-yake J.P.Gaultier are representatives of the de-composition which discloses distortion and exag-geration of form through destructing the estab-lished way of construction J.Galliano R.Kawa-kubo Devota Y Lomba arte representatives of the decentring which restores the repressed and the alienated on the one hane and shows front-centrality on the other. Comme des Gar ones is representative of the discontinuity because of which right and left up and down are not in har-mony with one another. J,Galliano J.P,Gaultier T,Mugler are representatives of the disruption by way of which one makes one's body exposed through intentional slashes or holes. As a consequence deconstructionism enabled us to investigate similarities between through of deconstruction and modes of art interms of diffrance Intermeaning of meanings intertextuality and Dis De-phenomenon. And we found that deconstruction was a phase of development in that it as a all-comprising and multiple concept tries to pursue the new through deconstruction.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.14-19
• /
• 2016

Transmission error (TE) is the most important cause of gear noise and vibration because TEs affect the changes of the force and the speed of gears. TE is usually expressed as an angular deviation, or a linear deviation measured at the pitch point and calculated at successive positions of the pinion as it goes through the meshing cycle. Accurate measurement of TE for gear transmission will provide a reasonable basis for gear design, manufacturing processes and quality control. Therefore, in order to study the accuracy of the gear transmission, stability, TE, vibration and noise after gear micro-geometry modification, a gear transmission test rig is proposed in this paper, which is based on the existing technical conditions, by using reasonable testing methods, hardware and a signal processing method. All of the details and the experience can be taken into consideration in the next upgraded test rig.

• 인터넷정보학회논문지
• /
• 제9권2호
• /
• pp.139-145
• /
• 2008

CRM(Customer Relationship Management)은 비즈니스 환경에서 기업의 이익과 경쟁적 우위를 차지할 수 있도록 하는 비즈니스 전략이다. 기업의 고객 응대 기법으로는 인터넷, E-mail, SMS(Short Message Service), 텔레포니 서비스, DM(Direct Mail)이 이용되고 있다. 최근 수익성 모델 향상을 위한 노력으로 기존 고객의 이탈 방지 및 유지, 신규 고객의 가입 및 유지를 통한 비즈니스 모델을 다각화하고 있다. 또한 고객의 최초 접점이 될 수 있는 CRM 센터의 업무 프로세스 재설계(Business Process Re-engineering), 업무 프로세스 관리(Business Process Management)가 빈번하게 발생하고 있다. 본 논문에서는 고객응대 CRM 모델 구축시의 고려 사항을 제시하고 콜 객체 라우팅(Call Object Routing)을 위한 에이젼트(Agent)를 제안하고 구현 및 성능평가를 하였다. 제안한 모델은 대 고객 응대 CRM 모델로 효율적으로 이용될 수 있다.