• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.347-354
• /
• 2001

In this study, 3-D FEM analysis are carried out to investigate the effect of the corners and re-entrant corners which can't be analysed by 2-D analysis. The excavation shape is re-entrant type conditions. The wall displacement, earth pressure and effectiveness of the corner struts are investigated in the re-entrant case, The 3D analysis are peformed to evaluate the effect of various factors, such as re-entrant corner size, excavation depth, and presence of struts. The wall displacement and earth pressures are influenced the size of re-entrant corner. Therefore, the effect of re-entrant corner should be considered in the evaluation of the earth pressure and displacement of the corners. Finally, strut-support systems are not effective at the re-entrant corner.

• 터널과지하공간
• /
• 제21권4호
• /
• pp.251-263
• /
• 2011

대단면 터널의 안전한 시공을 달성하기 위해서는 굴착암반의 공학적 특성 및 단층 등과 같은 구조지질적인 특성에 대한 파악이 무엇보다 중요하다. 본 현장은 운모 편암내에 대규모 스러스트 단층이 존재하고 있어, 대단면 터널 굴착시 터널의 안정성에 매우 심각한 영향을 미치는 지질공학적 리스크가 특히 큰 현장이라고 할 수 있다. 본 연구에서는 스러스트 단층의 구조지질적 분포 특성 및 단층암의 공학적 특성에 대한 지반조사결과를 바탕으로 터널낙반의 원인과 메카니즘을 분석하고, 이를 바탕으로 대단면 터널의 안전한 재시공을 위한 합리적인 보강대책을 수립하였다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 봄 학술발표회 논문집
• /
• pp.87-92
• /
• 2000

In excavation of tunnels especially located in shallow depth, it is not rare to meet geological change in excavation progress worse than expected in the initial design stage. This paper present a case study on the re-design of excavation and support system of a shallow tunnel under construction where it meets the unexpected bad geological condition during excavation. The detailed geological investigation shows that the rock mass is heavily weathered and fractured with RMR value less than 20. Considering this geological condition, the design concept is focused on the reinforcement of the ground preceding the excavation of tunnel. Two design patterns, LW-grouting & forepoling with pilot tunnelling method and the steel pipe reinforced grouting method, are suggested. Numerical analysis by FLAC shows that these two patterns give the tunnel and roof ground stable in excavation process while the original design causes severe failure zone around the tunnel and floor heaving. In point of the mechanical stability and the degree of construction, the steel pipe reinforced grouting technique proved to be good for the reinforcement of heavily fractured rock mass in tunnelling. This assessment and design process would be a guide in the construction of tunnels in heavily weathered and fractured rock mass situation.

• 한국건설순환자원학회논문집
• /
• 제7권4호
• /
• pp.349-357
• /
• 2019

본 연구에서는 현장 굴착토를 활용한 유동화 채움재의 실용화 기술개발의 일환으로서 유동화 채움재의 배합요인별 유동성, 재료분리 저항성, 조기강도 및 재굴착강도 등의 공학적 특성을 검토하여 최적 배합비를 도출하였으며, 이를 토대로 이동식 B/P를 활용한 현장 적용성 평가를 수행하였다. 이동식 B/P를 활용한 현장평가 결과 요구성능을 확보할 수 있었다. 유동화 채움재의 타설 후 후속공정 개시기 확보를 위한 검토에서는 타설 5시간 후 노반재 투입 등 후속공정이 가능한 것으로 확인되었다. 유동화 채움재의 재굴착성 검토를 위해서는 타설 28일 코어 채취 및 강도측정, 기계 및 인력 재굴착 시연으로 재굴착성을 확보할 수 있는 것으로 나타났으며, 타설 단면 굴착 후 관 주변부 충진성 확보를 육안으로 확인할 수 있었다. 또한 품질 지속성을 평가하기 위해 타설 후 침하량을 측정하였으며, 우수한 체적 안정성을 확보할 수 있는 것으로 나타나 굴착토를 활용한 유동화 채움재의 실용화 가능성을 확인할 수 있었다.

• 한국터널지하공간학회 논문집
• /
• 제2권3호
• /
• pp.71-81
• /
• 2000

NATM 터널을 시공함에 있어서 정확한 지반조사 결과에 의한 설계가 요구되나, 현실적으로 완벽하게 지반조건을 파악하지 못하고 설계가 진행되는 경우가 많다. 특히 연약지반 또는 지하수의 유입이 급격히 진행되는 등의 열악한 지반과 조우하였을 때에는 현황을 최적으로 반영할 수 있는 계측결과에 기준한 적절한 보강공사 등의 터널의 안정성 확보가 요구된다. 본 보고서에서는 토사 터널 구간의 시공에 있어서, 발생한 변위량을 재현할 수 있도록 터널 계측결과를 이용한 역해석 (back analysis)을 통해 지반의 공학적 제상수를 재평가 한 후, 유한차분법을 이용한 수치해석을 이용하여 최적의 터널 안정성을 검토하였다. 또한 수치해석 결과 및 시공 현황 등을 고려하여 터널 측벽 및 하반부에 강관 일단식 그라우팅과 상반 굴착 후에 가인버트 공법 등을 적용하여 터널의 역학적 안정성을 확보한 토사구간의 굴착을 완료하였다.

• 한국터널지하공간학회 논문집
• /
• 제15권3호
• /
• pp.321-331
• /
• 2013

이 연구는 TBM의 디스크커터 관입깊이에 대하여 실질적인 현장을 통하여 평가한 것이다. 연구를 위하여 설계시 적용되는 디스크커터 관입깊이에 대하여 검토하였다. 또한 대상 현장에 대한 지반특성에 대하여 검토하고 현장에 투입된 장비에 대한 적용성에 대하여 분석하였다. 특히 장비의 용량분석을 실시하여 적합성에 대하여 평가하였다. 이러한 평가결과와 현장 공사자료를 근거로 실질적인 TBM의 공사량과 굴진속도를 분석하였다. 이 결과로부터 설계시 적용된 TBM의 디스크커터 관입깊이에 대하여 재평가 하였다. 연구 결과로부터 설계시 적용되는 디스크커터 관입깊이는 특히 극경암 지반($S_c$ >150 MPa)에 있어서 적용값의 변경이 필요하다는 것을 명백히 보여주었다.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 연약지반처리위원회 학술세미나
• /
• pp.1-13
• /
• 1999

The use of Compaction Grouting evolved in the 1950's to correct structural settlement of buildings. Over the almost 50 years, the technology has developed and is currently used in wide range of applications. Compaction Grouting, the injection of a very stiff, 'zero-slump' mortar grout under relatively high pressure, displaces and compacts soils. It can effectively repair natural or man-made soil strength deficiencies in variety of soil formations. Major uses of Compaction Grouting include densifying loose soils or fill voids caused by sinkholes, poorly compacted fills, broken utilities, improper dewatering, or soft ground tunneling excavation. Other application include preventing liquefaction, re-leveling settled structures, and using compaction grout bulbs as structural elements of minipiles or underpinning. The technique replaced slurry injection, or 'pressure grouting', as the preferred method of densification grouting. There are several reasons for the increased use of Compaction Grouting which can be summarized in one word: CONTROL. The low slump grout and injection processes are usually designed to keep the grout in a homogeneous mass at the point of injection, while acceptable in some limited applications, tends to quickly get out of control. Hydraulic soil fracturing can cause extensive grout travel, often well beyond the desired treatment zone. So, on the basis of the two case history constructed in recent year, a study has been peformed to analyze the basic mechanism of the Compaction Grouting and verify the effectiveness of the ground improvement using some test methods.

• 복식
• /
• 제57권9호
• /
• pp.67-75
• /
• 2007

The purpose of this research is to conserve of golden decoration(Jikgeumdan) of Chima(skirt) and Jeogori(Korean jacket) of the costumes excavated from Hangju Gi' tomb(17th Century) of Joseon dynasty$(1392{\sim}1910)$ and to focus on the development of conservation skill to prevent flakings of gold leaves in gilt paper strips. Up to the present, in case of golden decorations of costumes excavated from tombs of Joseon dynasty, some of gold leaves in gilt paper strips of costumes were flaked away by deterioration of adhesives in tombs. However, most of gold leaves were flaked away and totally lost by wet cleaning for eliminating contaminants after excavation. In order to prevent flaking, preliminary experiments for re-adhesion of gold leaves have been carried out. Firstly, simulation was performed using gold leaf which was available in the market. Adhesives used in this research were water-soluble adhesives(hide glue(cow, rabbit), glue made from air bladders of sciaenoid fish and Primal AC-3444 of acrylic emulsion) and solvent-soluble adhesives(acrylic adhesive Paraloid B-67 and B-72). Because of difficulty in wetting and spreading of adhesive solutions into the interface between gold leaf and Korean paper, water-soluble adhesives were not proper for adhesion of gold leaf and Korean paper. Solvent-soluble adhesives were easily infiltrated into interface between gold leaf and Korean paper and the adhesive force was also satisfied. From this result, the researchers chose more flexible Paraloid B-72$(Tg\;40^{\circ}C)$ 1% solution than Paraloid B-67$(Tg\;50^{\circ}C)$ for adhesion of gold leaf and Korean paper. Secondly, using Paraloid B-72 1% solution, the estimations of re-adhesions of gold leaves in gilt paper strips of Jeogori were carried out. When Paraloid B-72 1% solution was injected three times into the interface between gold leaf and Korean paper, the re-adhesion was most effective. On the basis of the results in these preliminary experiments, re-adhesions of gold leaves in gilt paper strips of Chima and Jeogori were carried out on condition of three times injections of Paraloid B-72 1% solution before wet cleaning. After wet cleaning, the most of the gold leaves were survived, which was confirmed by both the examination with the naked eye and the microscopic examination.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 추계 학술발표회
• /
• pp.473-485
• /
• 2010

Lightweight materials using in-situ clay soil contain large amounts of fine grain and cement for increasing the strength, lighter weight to increase liquidity for the foam and the bulk of the material is conducted by the water. Domestic cases, Light weight soil to improve cementation and lightness using demountable mixing device is defined Smartsoil. Typical features are their self-leveling, self-compaction, folwability. By adjusting the amount of cement, the strength can be controlled artificially. And re-excavation is easy. In this paper, pre-loading method using the road due to the displacement of adjacent structures under construction as an alternative SmartSoil introduces the design and construction practices. Is to discuss and improve.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2006년도 춘계 학술발표회 논문집
• /
• pp.1068-1075
• /
• 2006

Flow-able backfill is known as soil-cement slurry, void fill, and controlled low-strength material (CLSM). The benefits of CLSM include reduced equipment costs, faster construction, re-excavation in the future, and the ability to place material in confined spaces such as narrow parts nearly impossible for compaction or perimeter of underground power cables. A review of some recent full-scale tests carried out by KEPRI on slurry backfill materials for application in underground power cable was presented. Based on this research, applicability was assessed and compare to results of laboratory tests for improved slurry materials with optimal mixture contents.