• Journal of the Korean Society of Safety
• /
• v.19 no.4 s.68
• /
• pp.69-73
• /
• 2004

The flash point is one of the most important combustible properties used to determine the potential for the fire and explosion hazards of industrial material and the fire point is the temperature of the flammable liquid at which there will be flaming combustion, sustained 5 seconds in response to the pilot flame. In this study, the flash point and fire point were measured to present raw data of the flammable risk assessment for alcohols, using Tag open-cup apparatus(ASTM D 1310-86). The measured values were compared with the calculated values based on 0.78 times stoichiometric concentration. The values calculated by the proposed equations were in good agreement with the measured values.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.05a
• /
• pp.220-223
• /
• 2018

스마트폰의 GPS 기능으로 위치 정보를 수집하여 사용자에게 서비스를 제공하는 시스템이 많아지고 있다. 이러한 GPS 기능은 위성에서 송신된 신호로 위도와 경도를 측정하여 위치를 계산한다. 하지만, 이러한 기능은 사용자가 실외에 있을 경우에만 사용이 가능한 것으로, 실내에서는 사용이 불가능하다는 단점이 있다. 최근 상용화 되고 있는 UWB 레이더 센서는 실내외에서 사용이 가능하고, 객체 탐지 및 거리측정이 간단함과 동시에 저렴하다는 장점이 있다. 본 논문에서는 UWB 레이더 센서와 표준편차를 이용하여 거리 측정 방법을 제시하고자 한다. 제시하고 있는 방법은 레이더 센서에서 나오는 raw data를 그래프화 하여 최대 탐지 거리가 몇 m 인지 파악하고, 파악된 최대 감지 거리를 일정 구간으로 나누어 구간별 거리를 측정한다. 그 후 표준편차 공식을 이용하여 객체의 유무를 판단한다. 실험 결과에서는 제시하는 방법으로 최대 거리 9.7m에서 최대 오차 0.27m 이내로 측정되는 것을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 1988.11a
• /
• pp.107-110
• /
• 1988

The quadratic cost function J(x) and the normalized residuals $r_N$ are conventionally used for identifying the presence and location of bed measurements in power system state estimation. These are "post estimation" tests and therefore require the complete re-estimation of system states whenever bed data is identified. This paper presents a pre-filter for reducing errors of the raw measurements using an adaptive filter. Each measurement is processed by the adaptive filter before being used in the state estimation. The performance of the adaptive filter is tested and the results are shown in this paper.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.04a
• /
• pp.964-967
• /
• 2001

Aspherical lens with the higher numerical aperture has been needed in the optical storage device to increase the recording density on the disk. However, high numerical aperture means the large slope angle at the clear aperture of the lens. Therefore, the measurement and manufacturing technique including the lens molding process for the slope angle should be developed. In this paper, the evaluation technique was described for the optical performance of the aspherical lens. Aspherical form error brings about the wavefront error and the side lobe of the beam intensity profile. A schematic diagram of the aspherical lens manufacturing was drawn to explain the aspherical form error compensation. Finally, form error of the aspherical lens was defined and plotted using the raw data of the Formtalysurf.

• Journal of the Korean institute of surface engineering
• /
• v.45 no.1
• /
• pp.31-36
• /
• 2012

In order to improve the mechanical roperties of the Gangjin celadon $BaTiO_3$ was added into the raw materials of celadon matrix. Through SEM and XRD analysis the structural changes were observed and the hardness values were measured. We could confirm that the mechanical strength considerably increased in the $BaTiO_3$ added celadon through the measurement of hardness values. The increase of mechanical strength values in the celadon may result from the compositional change in the microstructure such as grain boundary area through EDAX analysis. We might suggest a fundamental idea to improve the mechanical intensity of the celadon.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.04a
• /
• pp.101-103
• /
• 2000

본 논문에서는 GPS(Global Positioning System)와 추측 항법 시스템인 DR(Dead Reckoning)을 혼합 구성한 수신보드의 운영을 위한 Embedded 운영체제를 설계하고 구현 하였다. 이 운영체제는 실시간으로 인공위성으로부터 수신되어지는 Raw Measurement 획득, GPS 항법, 자세 결정, 통합항법, 위성 추적을 수행하는 태스크들을 우선순위 기반으로 처리하는 선점형(Preemptive) 스케쥴링 방식을 채택한 실시간 운영체제 이다. 본 논문에서는 자세 결정용 GPS와 DR 센서를 이용한 통합시스템보드를 위한 실시간 운영체제의 개발 환경, 운영체제의 구조와 개발 내용에 대해 언급하였다.

• Journal of the Korean Chemical Society
• /
• v.7 no.2
• /
• pp.153-158
• /
• 1963

A review of the literature is cited. Little exact information exists on the relation between clay materials and talc. The raw materials which are used in making steatite body consist of talc, clay, feldspar, and flint mined in Korea. The percentage absorption and linear burning shrinkage are measured and then discussed. The vitrified bodies were used in measurement of dielectric properties. The method of measurements for dielectric properties are described too.

• Journal of Fisheries and Marine Sciences Education
• /
• v.17 no.3
• /
• pp.427-433
• /
• 2005

The study of Web GUI(Graphic User Information) system for Virtual Reality System is mainly performed on effective methodology which transform real world data to computing world data. MGIS(Marine Geographic Information System) has its own target on reliable data service by acquisition of geometric information using accurate measurement and graphical visualization. This type of raw data visualization can be built without software tools, yet is incredibly useful for interpreting and communicating data. Even simple visualizations can aid in the interpretation of complex 3D relationships that are frequently encountered in the geosciences. The Virtual Reality Modeling Language provides an easy way for geoscientists to construct complex visualizations that can be viewed with free software. This study propose a three dimensional Web GUI system using MGIS-based three dimensional data models and virtual imaging system. Finally, we design a Web GUI system integrating above data models.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.388-394
• /
• 2000

The C4A3S clinker was prepared by the solid-state reaction. The mixture of raw materials; calcite, kaoline and gypsum, was fired at 135$0^{\circ}C$ for 1hr and cooled rapidly in air. C4A3S type expansive was made with C4A3S clinker, CaO and CaSO4. The cement replaced by 10 wt.% C4A3S type expansive was investigated by the measurement of the strength(compressive, tensile, flexural) and length change at various curing conditions. Hydration products were mainly ettringite, monosulfate and Ca(OH)2. The densification and the expansion due to the formation of ettringite during the hydration increased strength and reduced the drying shrinkage of hardened cement.

• Industrial Engineering and Management Systems
• /
• v.1 no.1
• /
• pp.29-45
• /
• 2002

In this study, we consider infinite supply of raw materials and backlogged demands as given two boundary conditions. And we need not make any specific assumptions about the inter-arrival of external demand and service time distributions. We propose a numeric model and an algorithm in order to compute the first two moments of inter-departure process. Entropy enables us to examine the convergence of this process and to derive measurable relations of this process. Also, lower bound on the variance of inter-departure process plays an important role in proving the existence and uniqueness of an optimal solution for a numeric model and deriving the convergence order of augmented Lagrange multipliers method applied to a numeric model. Through these works, we confirm some structural properties and numeric examples how the validity and applicability of our study.