• Culinary science and hospitality research
• /
• v.11 no.4 s.27
• /
• pp.118-133
• /
• 2005

In the management activities of head office in supporting franchisees in domestic food-service enterprises, the raw material supply plays a positive role to support franchisees' operation activity and it comes into conflict with them at the same time. In this paper, I have tried to find out the relationship between raw material supplying and the satisfaction of the franchisees by experimental research in order to research the route of head office's raw material supplying. To sum up the results, it was found out there is no meaningful relationship between the raw material supplying and the franchisees satisfaction (intention to renew the agreement), It indicates it would be more effective for the franchisees to buy the raw materials from the suppliers developed by the franchisees except some key materials in order to reduce the conflicts with the franchisees.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.585-589
• /
• 2009

Extruder is divided to greatly three part at extrusion process. First, by hopper(Hopper) second, barrel(Barrel) with Screw that is point of extruder and third that is raw material supply wealth extrusion into dies(DIES) Part that decide shape of do product greatly divide. Hopper is role that distribute in raw material supply wealth (Feeding zone) of Screw preserving raw material in state of high quality how at extrusion process, and make distributed raw material as Screw in barrel rotates and 3 stage and inflicting heat and pressure raw material melting(Melting) state. And raw material of melting state Screw's measuring stoker(Metering zone) whereabouts anaphora do and product is completed through pipe channel of dies. Dies that is the most important as Screw in extrusion is part that is last part of melting state process of raw material and causes huge effect in quality of product. If more than design of dies happens, manufacture itself of dies is hard, but there are a lot of amount of losses accordingly. In this research, make pipe channel that raw material of melting state flows in dies can present dies basic design method through flow analysis of ideal pipe channel using CFdesign.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.11a
• /
• pp.141-145
• /
• 2008

Because of world financial crisis, The Korea domestic construction industry has been damaged hugely on material supplying work. A current domestic material supply system can't react properly on a great rise of foreign exchange rate and raw material price, so the system has a problem which is not properly supplying material. To solve this problem, a more innovative material supply work system is seriously needed than ever. So this study wants to improve material supply system for supplying material right time, right place through applying a web-based system. Applying this, overall process of material-supply-work can be done on a web-based system for immediately understanding change of ordering and warehousing by material-supply-schedule to a domestic construction field.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.37 no.4
• /
• pp.116-125
• /
• 2014

In this paper, we investigate an inventory and production system in a three-layer supply chain system involving a single supplier, single manufacturer and multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce single item, but we consider raw materials in order to produce multiple items. It is assumed that the cycle time at each stage is an integer multiple of the adjacent downstream stage. We develop an iterative solution procedure to find the order quantity for the multiple items and raw materials that minimizes the supply chain-wide total cost per unit time of the supplier and manufacturer's raw materials ordering and holding, setup and finished items holding, the retailer's ordering and inventory holding. Numerical examples are presented to show that the proposed heuristic gives good performance.

• Korea Trade Review
• /
• v.47 no.2
• /
• pp.133-154
• /
• 2022

The Baltic Capesize Index (BCI), which is used as an indicator for marine transportation of steel raw materials, is one of the key economic indexes for managing the risk of loss due to rapid market fluctuations when steel companies establish business strategies and procuring plans for raw materials. Still, the conditions of supply and demand of steel raw materials has been extremely affected by volatility shocks from drastic events like the financial crisis such as the Lehman Brothers incident and changes in the external environment such as COVID-19. And, especially since the 2008 financial crisis, endeavors to predict the market conditions of the steel raw material is becoming more and more arduous for the deepening uncertainty and increased volatility of BCI, which has been used as a leading indicator of the real economy. This study investigates the correlation between the steel raw material market and the marine transportation market by estimating the spillover effect of information between markets. The vector error correction model (VECM) was used to analyze information transfer based on the correlation between the BCI and crude steel production, capesize fleet supply, raw material price, and cargo volume.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.34 no.4
• /
• pp.25-34
• /
• 2011

In this paper, we investigate an inventory system where a single manufacturer purchases and processes raw materials in order to deliver finished goods to multiple retailers. Earlier study in this type of supply chain only consider a single raw material in order to produce finished goods, but we consider multi-raw materials in order to produce finished goods. Also, we develop an iterative solution procedure to find the order quantity for the finished goods and raw materials, and the number of shipments between manufacturer and retailers that minimizes the total cost per unit time of the raw materials ordering and holding, manufacture's setup and finished goods holding, the retailer's ordering and inventory holding. Numerical examples are presented to illustrate that jointly considering the total cost results in less total cost than that of considering them separately.

• Korean Journal of Poultry Science
• /
• v.8 no.1
• /
• pp.25-30
• /
• 1981

This study was conducted to find the method that the least-cost formula can be determined thus allowing a better keeping of raw material supplies under the constraints having to be used some raw materials that are either in limited supply or for other reason in restricted use. In this study, it was considered that three kinds of feed were produced under limited supply of six kinds of raw materials, and data for the analysis were collected from a feed mill in southern part of Korea. According to the result of this study, it was proved better to determine the least-cost formula as the multi-mix problem than as the simple least-cost problem when more than two kinds of feed were produced wilt limited supply of raw materials.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.3
• /
• pp.115-123
• /
• 2006

The main focus of this study is to investigate the performance of a clark-scarf type multi-echelon serial supply chain operating with a base-stock policy and to optimize the inventory levels in the supply chains so as to minimize the systemwide total inventory cost, comprising holding and backorder costs as all the nodes in the supply chain. The source of supply of raw materials to the most upstream node, namely supplier, is assumed to have an infinite raw material availability. Retailer faces random customer demand, which is assumed to be stationary and normally distributed. If the demand exceeds on-hand inventory, the excess demand is backlogged. Using the echelon stock and demand quantile concepts and an efficient simulation technique, we derive near optimal inventory policy. Additionally we discuss the derived results through the extensive experiments for different supply chain settings.

• Resources Recycling
• /
• v.23 no.3
• /
• pp.51-60
• /
• 2014

In this study, the domestic supply & demand of the raw materials of 35 rare metals was analyzed categorized as four types - ores, metals, compounds and scraps. Foreign trade volumes of the raw materials of rare metals have been steadily increased, furthermore, recently trade growth rate highly exceeds GDP. The raw materials of rare metals - silicon, nickel, molybdenum, manganese, etc. - for steel industry were the most big part of the raw materials of rare metals trade, while the raw materials of rare metals for electronics industry were imported relatively small volumes less than $100 million. However systematic supply & demand management on the raw materials of rare metals for electronics industry is needed since recently growth rate per year has been remarkably high over 20%. Import volumes were about three times bigger than export scale, and most of the raw materials of rare metals were traded as a metal form.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.194-200
• /
• 2021

This study proposes a plan to construct an integrated platform that reduces manufacturing costs and efficiently produce by integrating the systems of main producers, production subcontractors, and raw material subcontractors for the production of food packaging containers. The production plan of food packaging containers and raw materials is established in real time between the main producers, production subcontractors, and raw material subcontractors in consideration of the demand characteristics of each product. It establishes basic information that all processes from the production planning stage to the forwarding stage of the product are linked to each other. The progress of each producer of interlinked processes is shared in real-time to improve productivity and quality of food packaging containers and raw materials and reduce manufacturing costs. By monitoring the system of the main producer and the production subcontractor in real time, the production of food packaging containers is performed in a timely manner, thereby improving productivity. The application of the plan-do-check-action (PDCA) process, which includes planning, execution, evaluation and improvement in the production operation processes of the main producer, production subcontractor and raw material subcontractor, enables improved production compliance rate. The contents of the main producers, production subcontractors, and raw material subcontractors are managed in real time, then a converged production management system is established through the platform proposed in this study to ensure timely supply and demand of raw materials without delay in ordering.