• Journal of Integrative Natural Science
• /
• v.7 no.2
• /
• pp.124-129
• /
• 2014

In this paper, we construct an logarithmic spiral-like curve using curvature-continuous quadratic spline and quadratic rational spline. The quadratic (rational) spline has self-similarity. We present some properties of the quadratic spline. Also using this $G^2$ quadratic spline, an approximation of logarithmic spiral is proposed and error analysis is obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.5 s.98
• /
• pp.160-168
• /
• 1999

This paper describes one method of reverse engineering that machines a free form shape without descriptive model. A portable five-axes 3D CMM was used to digitize point data from physical model. After approximation by rational B-spline curve from digitized point data of a geometric shape, a surface was constructed by the skinning method of the cross-sectional design technique. Since a surface patch was segmented by fifteen part, surface merging was also implemented to assure the surface boundary continuity. Finally, composite surface was transferred to commercial CAD/CAM system through IFES translation in order to machine the modeled geometric shape.

• Journal of the Korean Society for Industrial and Applied Mathematics
• /
• v.13 no.4
• /
• pp.257-265
• /
• 2009

In this paper we find an explicit form of upper bound of Hausdorff distance between given cubic spline curve and its quadratic spline approximation. As an application the approximation of offset curve of cubic spline curve is presented using our explicit error analysis. The offset curve of quadratic spline curve is exact rational spline curve of degree six, which is also an approximation of the offset curve of cubic spline curve.

• Journal of Mechanical Science and Technology
• /
• v.15 no.2
• /
• pp.192-198
• /
• 2001

We consider an interpolation problem with nonuniform rational B-spline curves given ordered data points. The existing approaches assume that weight for each point is available. But, it is not the case in practical applications. Schneider suggested a method which interpolates data points by automatically determining the weight of each control point. However, a drawback of Schneiders approach is that there is no guarantee of avoiding undesired poles; avoiding negative weights. Based on a quadratic programming technique, we use the weights of the control points for interpolating additional data. The weights are restricted to appropriate intervals; this guarantees the regularity of the interpolating curve. In a addition, a knot placement is proposed for pleasing interpolation. In comparison with integral B-spline interpolation, the proposed scheme leads to B-spline curves with fewer control points.

• Journal of Korea Multimedia Society
• /
• v.5 no.4
• /
• pp.386-392
• /
• 2002

In this paper, we propose a novel blocking effect reduction method based on a rational B-spline. The blocking effect results from independent coding of each image block and becomes highly visible especially coded at very low bit rates. The proposed approach adopts a rational open uniform B-spline curve that used to produce a smooth curve through a set of control points. The pixels on the block boundary are treated as control points, and the weight values, which decide the shape of curve, are determined differentially by considering the distance the position of the pixels and that of the block boundary. The simulation results show that the proposed method has excellent performance for all pattern of the blocking effect with less computational complexity.

• Journal of Korea Multimedia Society
• /
• v.6 no.7
• /
• pp.1169-1177
• /
• 2003

The blocking effect results from independent coding of each image block and becomes highly visible, especially coded at very low bit rates. In this paper, a blocking effect reduction circuit is designed which is composed of a memory, arithmetic and logic unit, and control block. The circuit is based on a rational open uniform B-spline curve that uses to produce a smooth curve through a set of control points. The weight values and the modified pixel values in a rational open uniform B-spline curve are calculated using arithmetic and logic circuits. The simulation results show that the circuit has excellent performance for ail pattern of the blocking effects.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.107-110
• /
• 2001

본 논문에서는 유리 B 스플라인 곡선을 이용한 새로운 블록 효과 감소 방법들 제안한다. 블록 효과는 매우 낮은 비트율로 블록 기반 부호화 방식을 수행할 때 복원 영상에서 나타나는 블록 형태의 왜곡을 의미한다. 제안된 기법에서는 컴퓨터 그래픽스 분야에서 제어점을 근사하는 부드러운 곡선을 생성하기 위해 사용되는 유리 B 스플라인 곡선을 이용하여 블록 효과를 감소시킨다. 즉 블록 경계의 화소 값들을 제어 점으로 사용하며 블록 효과 발생 정도에 따라 가중치를 가변적으로 설정함으로써 블록 효과가 효율적으로 감소되도록 한다. 모의 실험은 제안된 방법이 기존 방법들에 비해 우수한 블록효과 감소 성능을 가지는 것을 나타낸다.

• Journal of the Korea Computer Graphics Society
• /
• v.17 no.1
• /
• pp.1-7
• /
• 2011

We present a new technique for constructing a sweep surface using two-parameter motion. Firstly, a new rational B-spline motion with two parameters is introduced, which is obtained by extending its orientation curve and scaling curve to surface counterparts. A sweep surface is then defined by a single vertex v under the two-parameter motion and allows to represent different u-directional iso-curves depending on parameter ${\upsilon}$. Efficient techniques for modeling and editing the surface are achieved by intuitively controlling the two-parameter motion. We demonstrate the effectiveness of our technique with experimental results on modeling and editing a 3D propeller model.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.18 no.6
• /
• pp.576-584
• /
• 2009

Up to now, it has been said that no satisfactory computer solution has been found for synthesizing four-bar linkage based on the prescribed coupler link curve. In our study, an algorithm has been developed to improve the design synthesis of four bar linkage based on the 5 precision points method. The suggested algorithm generates the desired coupler curve by using NURBS, and then the generated curve approximates as closely as possible to the desired curve representing coupler link trajectory. Also, when comparing each generated curve by constructing the control polygon, rapid comparison is easily achieved by applying convex hull of the control polygon. Finally, an optimization process using ADS is incorporated into the algorithm based on the 5 precision point method to reduce the total optimization process time. As for examples, two four bar linkages were tested and the result well demonstrated the effectiveness of the algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.920-924
• /
• 2002

This paper presents the reverse design of a cam mechanism using NURBS(Nonuniform Rational B-spline curve). Cam is very difficult to make the accurate shape on the design and the manufacture. Because the cam shape is commonly made in order to move in special functions. The reverse design can be used to check accuracy between the designed data and the manufactured data of the cam shape and also reproduce the cam without the design data. The reverse design procedures consist of motion analysis and curve fitting. The motion analysis is used the central difference method and the relative velocity method to find the displacement and velocity. The curve fitting is used NURBS to develope the whole curve. The central difference method is derived in the 3 dimensional space.