• Journal of Chest Surgery
• /
• v.18 no.3
• /
• pp.517-528
• /
• 1985

Pulmonary function studies today are generally accepted as an integral part of the evaluation of poor-risk patients who are to have pulmonary surgery. The effect of various pulmonary surgery on lung function was investigated in 54 patients in whom comprehensive lung function test were performed before and between 2 months and 14 months after operation at the Department of Thoracic Surgery, Seoul National University Hospital. According to the result of analysis, the effect of pulmonary resection on forced flow rate was keeping with the change of lung volume, and the preoperative level of ventilatory function plays a major role in determining postoperative loss of functioning lung. Although all measures of expiratory flow [FVC, FEV1, FEFO.2-1.2, MEF50, FEF25-75] have the same percentage of reproducibility, but FEV1 shows most sensitive, reliable linear correlation with the functioning pulmonary tissue loss than other parameters. The linear regression lines derived from the correlation between preoperative [X] and postoperative [Y] FEV1 on various surgical procedures were as follows: 1. Y = 0.57X 0.03. in pneumonectomy group of lung cancer[r=0.84]. 2. Y = 0.56X + 0.33. in lobectomy group of lung cancer[r=0.79]. 3. Y = 0.69X + 0.25. in lobectomy group of pulmonary infection[r=0.91].

• Biomedical Science Letters
• /
• v.1 no.1
• /
• pp.73-79
• /
• 1995

The effect of prior cumulative mixing was evaluated by means of a simple regression model which used as a dependent variable percentage(%) change of each repeated observed value for the initial value. The red blood cell count (RBC), hematocrit (Hct), and mean corpuscular volume(MCV) showed a significant decrease (p<.01), but % of basophils had a significant increase (p<.05). The ratios of rate of change (regression coefficient/SD) were .0012 for RBC, .0020 for Hct, .0024 for MCV, and .0011 for % of basophils. Of the 19 parameters evaluated, 21% changed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.38 no.2
• /
• pp.106-111
• /
• 2005

We studied the cardio-respiratory properties in the Japanese amberjack (Seriola quinqueradiata) during acute hypoxia exposure. Fish were exposed to three levels of hypoxia (80, 60 or 50 mmHg) for 60 min at $25^{\circ}C$. Cardiovascular parameters (cardiac output; Q, heart rate; HR, stroke volume; SV, blood pressure; $P_{DA}$) changed little from pre-exposure values during both 80 and 60 mmHg of hypoxia. During 50 mmHg of hypoxia, the fish showed a bradycardia which significantly affected Q, whereas no change in SV. $P_{DA}$ increased transiently. Arterial oxygen partial pressure ($PaO_2$) immediately reduced along with a decrease of the water oxygen partial pressure ($P_WO_2$). Arterial $O_2$ content ($CaO_2$) decreased significantly only after 60 min of 50 mmHg of hypoxia. Arterial pH (pHa) and hematocrit value (Hct) did not change significantly. Comparing the effects of different levels of hypoxia, oxygen delivery to the tissues ($Q\;{\times}\;CaO_2$) should be maintained a constant over a broad range of $P_WO_2$, however, severely depressed below 50 mmHg of hypoxia.

• Korean Journal of Acupuncture
• /
• v.33 no.2
• /
• pp.58-66
• /
• 2016

Objectives : In order to find a possible non-invasive manipulation tool for maintenance of the cardiovascular functions in hemorrhagic shock, this study was aimed at evaluating effects of acupoints acupressure on the changes in blood pressure and heart rate from an animal model of hemorrhagic shock. Methods : In adult Sprague-Dawley rats, hemorrhagic shock was induced by a withdrawal of arterial blood from the femoral artery with volume of 0.8 ml per 100 g of body weight using peristaltic syringe pump. We applied the acupressure with a pressure oscillator to tail as a control and 2 different acupoints of sobu(HT8), youngchun(KI1) under 3 different conditions : 1) normal arterial blood pressure without bleeding, 2) at the beginning of bleeding, and finally 3) hemorrhagic shock. Results : Under normal arterial blood pressure without hemorrhage, there was a significant increase in systolic and diastolic blood pressures by the acupressure to the tail, HT8 and especially KI1 for 30 sec compared with before acupressure. Under hemorrhagic shock condition, the tail acupressure had minimal changes in cardiovascular parameters. Either the HT8 or KI1 acupressure resulted in a significant increase in arterial pressure but did not heart rate. At the beginning of bleeding, tail acupressure failed to change the reduction of arterial pressure and heart rate. However, there was a significant increase in blood pressure and heart rate following either the HT8 or especially KI1 acupressure. Conclusions : HT8 and KI1 acupressure affected cardiovascular signs but tail acupressure did not in rat model of hemorrhagic shock. These experimental data suggest that a acupressure with a pressure oscillator to HT8 or KI1 can be one of alternative emergency manipulations to ameliorate compromised cardiovascular functions under hemorrhagic shock condition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.7
• /
• pp.301-307
• /
• 2014

This paper presents a numerical study on the constrained melting of a phase change material inside various capsule containers, using water and HDPE (High Density Polyethylene) as a PCM and a capsule material, respectively. The computations are based on an iterative, finite-volume numerical procedure that incorporates a single-domain enthalpy formulation for simulation of the phase change phenomenon. Using the enthalpy method, various capsule configurations, such as a capsule from E company, an isochoric cylinder capsule, an equivalent diameter sphere capsule, and an isochoric sphere capsule, are used to investigate the effect of capsule configurations on the charging and discharging performance. A transient three-dimensional model is used for each case. The simulation results show that the capsule from E company results in a higher melting and solidification rate of the PCM, than the other capsule configurations considered in this research.

• International Commerce and Information Review
• /
• v.10 no.4
• /
• pp.301-319
• /
• 2008

The development of Korea in the Northeast through trade is not a matter of choice as far as national strategy is concerned, but is an important national policy that is a matter of life or death which will determine the future fate of Korea. This thesis will attempt to arrive at a general, tangible plan for the development of Korea in the Northeast centered around trade by examining the change in naval environment at home and abroad, the given economic situation in the Northeast, and the present state of essential port development in Korea-China-Japan. Its objective will be to provide strategies for the development of Busan port confrontation. For the last ten years, China has been growing at a rapid rate. Since a lot of the volume of naval trade is being transferred from Korea to China, we must do everything we can to improve the service and reduce cost. In addition, Japan also is losing international position. Japan's government and the private industry are trying to make Super Core Ports a prominent feature of their port system. If the Busan port system is to remain competitive, these aspects of the Japanese port system must be kept in mind to prevent trade from going to other ports with more competitive systems.

• Journal of Power System Engineering
• /
• v.18 no.1
• /
• pp.63-68
• /
• 2014

The numerical analysis of fluid flow in the tube cleaning system is examined. The working flow used in this study is seawater, and the temperature change is not considered as the temperature change of seawater in the tube cleaning system is negligible. Also, the analysis is performed under the assumption of steady state. The screens of complicated morphologies are simplified for the analysis, and only one fourth of the tube cleaning system is modeled as the system has a symmetrical shape. The velocity inlet boundary condition is employed for the seawater inlet, whereas the outflow boundary condition is employed for two seawater outlets. In applying the outflow boundary condition for the system with more than two outlets, the flow rate can be arbitrarily assigned. In the analysis, the finite-volume method based numerical analysis tool, the pressure based solver, the standard k-$\varepsilon$ model are utilized, and the under relaxation factor is modified appropriately. From the analysis, the distribution of velocity vectors, pressure and path lines are obtained, and the physical characteristics of fluid flow in the tube cleaning system is well-examined.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.1
• /
• pp.142-148
• /
• 1995

In this study, FVM (Finite Volume Method) which is one of the 2-dimensional numerical approach has been conducted to anticipate the temperature distribution between skin and clothes by the change of air temperature and fabric characteristics including fabric thickness. Several experimental works have been done to understand the thermal insulation effect (If fabrics on a human body by measuring the averaged temperature in the air layer between skin and clothes or by measuring the thermal resistance of fabrics. However, the formal method is inconvenient to measure the temperature distribution in the air layer to evaluate the insulation rate of the clothes on the skin because the real size of the clearance between skin and the clothes is too small to place the temperature sensor, and in the Tatter method the relationship between human body and the fabrics are ignored. However, the numerical method will be very effective and economical way to evaluate the insulation efficiency of clothes when the computational result is in the reliable range. As the result of this study, the temperature change in the sir layer between skin and clothes was linear to the fabric thickness and this result coincides with many previous experimental results. Moreover, it is possible to predict the optimum fabric thickness for the best thermal insulation in the air layer between skin and clothes.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.8
• /
• pp.1024-1029
• /
• 2012

As DME (Dimethyl ether) is the one of the future possible massive energy sources synthesized from natural gas, KOGAS has been doing to obtain overseas resources to meet the domestic needs. and tried to build new DME FPSO ship. This paper presents that it can help for the DME storage tank designers and storage management engineers doing proper work by understood the evaporation phenomena and pressure change of DME by thermal intake in storage tank. The experimental result shows that the evaporation rate and pressure are increased with higher liquid filling level. The proper DME liquid filling level in tank is obtained as lower than full 98% volume of tank in case of storing longer than a day, because the pressure is increased rapidly with full 98% filled level of storage tank.

• Korea Trade Review
• /
• v.42 no.6
• /
• pp.131-154
• /
• 2017

In international trade, transportation generally has the largest and direct impact on freight costs. However, it is also sensitive to external factors such as global economic conditions, global trade volume and exchange rate. Therefore, it is necessary to examine the relationship and influence of international trade in terms of external factors that affect the change of imports and exports by marine and air transportation through empirical analysis. In particular, the analysis of the impact of these external factors on marine and air transportation is an important topic when recent exchange rate changes are significant, and it is also necessary to analyze what transportation means are more sensitive to exchange rate changes. In this study, we use the Vector Error Correction Model to analyze the dynamic effects of changes in exchange rate and domestic and international economic conditions on marine and air transportation from January 2000 to March 2017. Respectively. Alos, Impulse response function and variance decomposition were examined.