• Archives of design research
• /
• v.13 no.2
• /
• pp.103-109
• /
• 2000

Rapid prototyping technology has been widely applied to the design process in the industry. This technology made it easy to generate a prototype which acts like a real product in logic. However, this technology has not been validated sufficiently as a usability test method. The purpose of this study was to test the hypothesis : There was no significant difference between a real product and its prototype. An experiment was designed to test it statistically. a microwave oven was selected and its prototype was generated using a rapid prototyping tool. Six subjects used the microwave oven and another six subjects used the prototype to perform five scenario tasks. As a result, there was significant difference between the real product and prototype in success rate, task completion time, and number of buttons pressed. The prototype was more difficult to operate than the real product. Therefore we should be careful when we apply rapid prototyping. technology. In the discussions, the causes of the difference were identified and some guidelines were suggested for who wants to apply rapid prototyping tool to the usability test.

• Archives of Craniofacial Surgery
• /
• v.13 no.2
• /
• pp.125-129
• /
• 2012

Purpose: Methylmethacrylate is the most commonly used alloplastic material in cranioplasty. However during the polymerization of methylmethacrylate, a significant exothermic reaction takes place. This reaction may result in thermal injury to the brain tissue and other soft tissues. Also it is difficult to make three-dimensional methylmethacrylate implant that is perfectly matched to the defect during the operation time. We report on the molding technique of methylmethacrylate implant using plaster mold and the rapid prototyping model in cranioplasty. Methods: A 44-year-old male was referred to the department for severe frontal hollowness. He was involved in an automobile accident resulting in large frontal bone defect with irregular margin. The preformed patient-specific methylmethacrylate implant was made using plaster mold and the rapid prototyping model before the operative day. The methylmethacrylate implant was placed in the frontal defect and rigidly fixed with miniplates and screws on the operative day. Results: The operation was performed in an hour. In the 6 months follow-up period, there were no complications. Patient was satisfied with the results of cranioplasty. Conclusion: Safe cranioplasty was performed with the preformed patient-specific methylmethacrylate implant using plaster mold and the rapid prototyping model. The result of this method was satisfactory, aesthetically and functionally.

• Journal of Institute of Control, Robotics and Systems
• /
• v.21 no.11
• /
• pp.1038-1043
• /
• 2015

When the study on the relationship between the Head-of-Bed (HOB) angle and ventilator-associated pneumonia is performed, the fact that the HOB angle can only be measured intermittently imposes a significant limitation on the study. Therefore, there has been demand for the development of a device that can measure the HOB angle continuously. In this paper, we propose the rapid prototyping of an HOB measurement system using open-source hardware and software. The proposed system helps to maintain the HOB angle at a particular angle by displaying the angle and helps the medical study of pneumonia patients by enabling continuous data acquisition. Firstly, we eliminate the process of making an MCU board by utilizing an open-source hardware mbed LPC1768. Secondly, we reduce the software development time by using libraries and hence enabling the easy use of peripherals. Thirdly, for rapid prototyping, we build the enclosure of the proposed system using a 3D printer. The proposed system can be attached and detached to and from a bed. Therefore, we can attach it to the bed of a patient for whom measurement of the HOB angle is necessary. Finally, we check the measurement performance and the validity of the proposed system through an experiment utilizing an incremental encoder.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.3 s.96
• /
• pp.53-61
• /
• 1999

STL has several errors such as orientation error, hole error, and acute triangle error on being translated from CAD software. These errors should be corrected before using in Rapid Prototyping. So the software is necessary to correct errors. In this study, STL Editor which is a system for STL error correction and shape modification is developed and contains following characteristics. 1.Apply the triangle based data st겨cture. 2.Use the graphic user interface for easy work. 3.Use the Diet method to reduce data size. 4.Use the Delaunay triangulation method to enhance the quality of STL. 5.Modify the STL errors manually.

• 한국HCI학회:학술대회논문집
• /
• 2009.02a
• /
• pp.1020-1023
• /
• 2009

It had been longer that the design mock-up was made mainly in order to test products. These days, it seems to be main stream that the working mockup is done because designers consider not only the design but also usability. In this study, the modular hardware toolkit, complimentary with Adobe Flash, was developed so that it solves the problem, the electronic hardware which the designers should struggle to make by themselves. This result thing could help the time of the design process to be short and contribute to make robust system rapidly.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.1
• /
• pp.55-62
• /
• 2016

In this paper, we propose a hybrid multi.system-on-chip (H-MSoC) architecture that provides a high-flexibility system in a rapid development time. The H-MSoC approach provides a flexible system-on-chip (SoC) architecture that is easy to configure for physical- and application-layer development. The physical- and application-layer aspects are dynamically designed and modified; hence, it is important to consider a design methodology that supports rapid SoC development. Physical layer development refers to intellectual property cores or other modular hardware (HW) development, while application layer development refers to user interface or application software (SW) development. H-MSoC is built from multi-SoC architectures in which each SoC is localized and specified based on its development focus, either physical or application (hybrid). Physical HW development SoC is referred to as physical-SoC (Phy-SoC) and application SW development SoC is referred to as application-SoC (App-SoC). Phy-SoC and App-SoC are connected to each other via Ethernet. Ethernet was chosen because of its flexibility, high speed, and easy configuration. For prototyping, we used a LEON3 SoC as the Phy-SoC and a ZYNQ-7000 SoC as the App-SoC. The proposed design was proven in real-time tests and achieved good performance.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1997.04a
• /
• pp.150-155
• /
• 1997

Rapid Prototyping(RP) is the technique which is used to make prototypes or functional parts directly using the 3-D solid data. Before building the prototype, several processes such as transfering 3D data from CAD system(STL) determination of build-direction, adding support structure and slicing are required. Among the above processes. determination of build-direction is the target of this study. The build direction is determined by many factors according to the objective of the user, like part accuracy, number of support structure, build time, amount of trapped volume, etc, But it is not easy to determine the build-direction because there are many factors and some factors have dependent properties with one another. So, in this study the part accuracy, the number of support structures and build time are considered as the main factor to determine the optimal build-direction. To determine the optimal build-direction for increasing part accuracy, sum of projected area which caused stairstepping effect was considered. The less the projected area is the better part accuracy is About the optimal build-direction to minimize the amount of support structure, sum of projected area of facets that require support structures was considered. About the build time, we considered the minimum height of part we intended. About the build time, we considered the minimun height of part we intended to make.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.87-95
• /
• 2008

The purpose of this study is to provide a decision support to select an appropriate rapid prototyping(RP) machine that suits the application of a part. Selection factors include concept model, form/fit/functional model, pattern model for molding, material property, build time and part cost that greatly affect the performance of RP machines. However, the selection of a RP is not an easy decision because they are uncertain and vague. For this reason, the aim of this research is to propose hybrid multiple attribute decision making approaches to effectively evaluate RP machines. In addition, because subjective considerations are relevant to selection decision, a fuzzy logic approach is adopted. The proposed selection procedure consists of several steps. First, we identify RP machines that the users consider. After constructing the evaluation criteria, we calculate the weights of the criteria by applying the fuzzy Analytic Hierarchy Process(AHP) method. Finally, we construct the fuzzy Technique of Order Preference by Similarity to Ideal Solution(TOPSIS) method to achieve the ranking order of all machines providing the decision information for the selection of RP machines.

• Korean Journal of Computational Design and Engineering
• /
• v.14 no.1
• /
• pp.33-41
• /
• 2009

Triangular mesh models are widely used in reverse engineering, computer graphics, rapid prototyping and NC(numerical controller) tool-path generation. Triangular mesh models are generated from point clouds, surface models and solid models. A halfedge-based triangular mesh data structure is proposed and the development considerations are presented. In the presented data structure, halfedge is the key data structure. Halfedge stores its triangle index and the order in the triangle. Triangles do not store the halfedge lists explicitly. Halfedge is referred by value and defined when it is required. Proposed data structure supports four design requirements: efficient rendering, compact memory, supporting efficient algorithms and easy programming.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.295-298
• /
• 2000

In this research, a novel sampling strategy for a CMM to inspect freeform surfaces is proposed. Unlike primitive surfaces, it is not easy to determine the number of sampling points and their locations for inspecting freeform surfaces. Since a CMM operates with slower speed in measurement than optical measuring devices, it is important to optimize the number and the locations of sampling points in the inspection process. When a complete inspection of a surface is required, it becomes more critical. Among various factors to cause shape errors of a final product, curvature characteristic is essential due to its effect such as stair-step errors in rapid prototyping and interpolation errors in NC tool paths generation. Shape errors are defined in terms of the average and standard deviation of differences between an original model and a produced part. Proposed algorithms determine the locations of sampling points by analyzing curvature distribution of a given surface. Based on the curvature distribution, a surface area is divided into several sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number of sub-areas. In each sub-area, sampling points are located as further as possible. The optimal number os sub-areas is determined by estimating the average of curvatures. Finally, the proposed method is applied to several surfaces that have shape errors for verification.