• Electronics and Telecommunications Trends
• /
• v.13 no.3 s.51
• /
• pp.71-83
• /
• 1998

반도체 제조용 웨이퍼의 온도를 측정하고 제어하는 기술의 진보로 열처리 장비 시장에서 점점 더 각광을 받고 있는 급속 열처리(rapid thermal process: RTP) 장치의 최근 기술 동향을 전반적으로 조사 분석하였다. RTP의 장점, 온도 제어 모델링 기술(model-based control), 최근에 개발된 여러 종류의 RTP 시스템 설계 및 이들 각각의 기술적인 문제들이 기술된다. 새롭게 개발된 단일 wafer furnace와 광자 효과를 이용한 rapid photothermal process (RPP)에 관해서도 기술하였다. 아울러 최근 열처리 장비 업체들의 현황과 열처리 장비 시장의 향후 전망에 관해서도 검토하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.358-358
• /
• 2000

An iterative learning control technique based on a linear quadratic optimal criterion is proposed for temperature uniformity control of a silicon wafer in rapid thermal processing.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.10
• /
• pp.68-76
• /
• 1997

In this paper, design parameters of rapid thermal processing(RTP) to minimize the wafer temperature uniformity errors are proposed. Lamp ring positions and the wafer height are important parameters for wafer temperature uniformity in RTP. We propose the method to seek lamp ring positions and the wafer gheight for optimal temperature uniformity. The proposed method is applied to seek optimal lamp ring positions and the wafer feight of 8 inch wafer. To seek the optimal lamp ring positions and the wafer height, we vary lamp ring positions and the wafer height and then formulate the wafer temperature uniformity problem to the linear programming problem. Finally, it is shown that the wafer temperature uniformity in RTP designed by optimal problem. Finally, it is hsown that the wafer temperature uniformity is RTP designed by optimal parameters is improved to comparing with RTP designed by the other method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.79-82
• /
• 1995

The problem of temperature control for rapid thermal processing (RTP) in semiconductor manufacturing is discussed in this paper. Among sub=micron technologies for VLSI devices, reducing the junction depth of doped region is of great importance. This paper investigates existing methods for manufacturing wafers, focusing on the RPT which is considered to be good for formation of shallow junctions and performs the wafer fabrication operation in a single chamber of annealing, oxidation, chemical vapor deposition, etc., within a few minutes. In RTP for semiconductor manufacturing, accurate and uniform control of the wafer temperature is essential. In this paper, a robustr controller is designed using a recently developed optimization technique. The controller designed is then tested via computer simulation and compared with the other results.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.27 no.3
• /
• pp.107-112
• /
• 2013

Cu(In,Ga)$Se_2$ (CIGS) thin films were annealed on molybdenium/sodalime glass substrates of $300{\times}300mm^2$ by rapid thermal processing (RTP) with 2-step rising-temperature times in $N_2$ ambient. Morphological property, structural characteristics and chemical composition of the precursor of CIGS thin films were influenced directly with a change of $1^{st}$-step rising-temperature time in RTP whereas there is no significant difference with the different $2^{nd}$-step rising-temperature time (final crystallization temperature). The shorter $1^{st}$-step rising-temperature time in RTP obtained the higher photovoltaic cell efficiency from 7.469% to 8.479% even though the ideal composition in CIGS thin films could not be accoplished in this study.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.12
• /
• pp.1865-1869
• /
• 1990

N-Channel polysilicon MOSFETs (W/L=20/1.5, 3, 5.10\ulcorner) were fabricated using RTP (Rapid Thermal Processor) and hydrogen passivation. The N+ source, drain and gate were annealed and recrystallized using RTP at temperature of 1000\ulcorner-1100\ulcorner. But the active areas were not specially crystallized before growing the gate oxide. Without the hydrogen passivarion, excellent transistor characteristics (ON/OFF=5.10**6, S=85MV/DEC, IL=51pA/\ulcorner) were obtained for 1.5\ulcorner MOSFET. Also the transistor characteristics were improved by hydrogen passivation.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.5
• /
• pp.410-414
• /
• 2013

Rapid thermal processing (RTP) abruptly decreases the time required to perform solar cell processes. RTP were used to form emitter of crystalline silicon solar cells. The emitter sheet resistance is studied as a function of time and temperature. The objective of this study is reduction of doping process time with same performance. Emitter difRapid thermal dfusion was carried out by using a spin on doping and a RTP. iffusion was performed in the temperature range of $700{\sim}750^{\circ}C$ for 1m 30s~15 m. Thermal budgets yielded a $50{\Omega}/sq$ emitter using a P509 source. To reduce process time and get high efficiency, rapid thermal diffusion by IR lamp was employed in air atmosphere at $700^{\circ}C$ for 15 m.

• Journal of IKEEE
• /
• v.3 no.1 s.4
• /
• pp.109-117
• /
• 1999

This paper describes the quick and precise control of the wafer temperature essential in rapid thermal processing(RTP). The bang-bang plus PID controller structure is introduced to satisfy rapid ramp-up rate and reduce overshoot and steady state error. The controller employs the PID action when the magnitude of the error between reference signal and the output temperature signal is smaller than some prescribed value. To find PID gains, the plant(autoregressive) model is first identified and Kappa-Tau tuning rule is used. The developed controller is applied to experimental RTP apparatus, and performances are evaluated.

• Journal of Institute of Control, Robotics and Systems
• /
• v.6 no.6
• /
• pp.500-505
• /
• 2000

This paper deals with wafer temperature uniformity control essential in rapid thermal processing (RTP). One of the important control objectives of RTP is to keep the temperature over the wafer surface as uniformly as possible. For this, a discrete time state equation around the operating point is first identified by using the subspace fitting method, and a multivariable LQG(Linear Quadratic Gaussian) controller is designed based on the identified model. Simulation and experimental results show improvement in temperature uniformity over the conventional PID method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.234-234
• /
• 2008

Chemically homogeneous $Ba_{0.6}Sr_{0.4}TiO_3$ (BST) sols were synthesized using barium acetate, strontium acetate, and titanium isoproxide as starting materials. BST thin films of thickness 340 nm were deposited on Pt/$TiO_2/SiO_2$/Si and alumina substrates using spin coating method. The technique used for the processing of these films was Ultraviolet (UV) sol-gel photoannealing, using phto-sensitivity precursor solutions and UV-assisted rapid thermal processing(UV-RTP). The crystallization behaviour of the BST sols and thin films was studied by differential thermal analysis (DTA) and X-ray diffraction (XRD). Variation of permittivity and dielectric loss were measured in LCR-meter, model HP 4394A.