• Journal of the Korean Society of Radiology
• /
• v.15 no.3
• /
• pp.307-312
• /
• 2021

In nuclear medicine, radioactive isotope tracers are administered to the human body to obtain and evaluate disease morphological information and biological function information. Dose calibrator is a device used to measure the radioactivity of a single nuclide in medical institutions. Administration of the correct dose to the human body acts as an important factor in diagnosis and treatment, and measurement through a dose calibrator before administration is the most important factor. Dose calibrator performs daily quality control after installation in each medical institution. Quality control is a means of guaranteeing quality control after installation, and is essential for improving the quality of treatment and promoting patient safety. Therefore, accurate and standardized performance evaluation methods should be established. In this study, 3D printing was used for quantitative evaluation of quality control by increasing the accuracy and standardization of quality control. When the 3D printer was installed and reproducibility was tested, the error range of the expected value and reading value decreased by 0.302% in the F-18 nuclide and 0.09% in the ^99mTc-pertechnate nuclide than when the 3D printer was installed. The error rate for other nuclides was also found to have a low error rate for reproducibility tests when 3D printing was installed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.200-210
• /
• 2020

The maintenance of educational facilities was assembled in 12 project classifications of the Educational Improvement Program. The priorities were decided by the evaluation scores derived from the condition investigation, and maintenance works were budgeted in the order of priorities. These priorities were a schedule for conducting maintenance and an important criterion for obtaining a construction order. Several restrictions in the condition investigation exist, which derives budgets and conducts maintenance separately based on the priorities. An educational facility manager has a restriction in quantity take-off, which results in an incorrect budget. Discomfort would occur in an educational environment, and a period of infringing safety would increase. This study proposes applying a BIM in the condition investigation and the planning framework for work-type packaging. A BIM supports a budget calculation and derives evaluation scores by linking a repair and an inspection result. The work-type packaging algorithm divides a budget allocation range and derives the result of a grouped work-types applied in an equivalent space and element. As a result of applying cases, it could shorten the duration by approximately 37.4%. Its usability in selecting a grouped work-type was evaluated through an assessment with workers.

• Clean Technology
• /
• v.26 no.4
• /
• pp.304-310
• /
• 2020

In order to apply a photocatalyst (TiO2) to various building materials, TiO2-mayenite was prepared in this study. The TiO2 was synthesized using the sol-gel method by fixing titanium isopropoxide (TTIP) and urea at a ratio of 1 : 1. Later, they were calcined in a temperature range of 400-700 ℃ to analyze the properties according to temperature. BET, TGA, and XRD were used to analyze the physical and chemical properties of TiO2. The nitrogen oxide removal test was confirmed by measuring the change in the concentration of NO for 1 h according to KS L ISO 22197-1. The prepared TiO2 samples exhibited an anatase crystal structure below 600 ℃, and TiO2 (urea)-400 showed the highest nitrogen oxide removal rate at 2.35 µmol h-1. TiO2-mayenite was prepared using two methods: spraying TiO2 dispersion solution (s/s) and sol-gel solution (g/s). Through BET and XRD analysis, it was found that 5-TiO2 (g/s) prepared by spraying a sol-gel solution has maintained its crystallinity even after heat treatment. Also, 5-TiO2 (g/s)-500 showed the highest removal rate of 0.55 µmol h-1 in the nitrogen oxide removal test. To prepare TiO2-mayenite, it was confirmed that mayenite should be blended with TiO2 in a sol-gel state to maintain the crystal structure and exhibit a high nitrogen oxide removal rate.

• Journal of The Korea Institute of Healthcare Architecture
• /
• v.27 no.1
• /
• pp.45-51
• /
• 2021

Purpose: Problems related to the elderly's daily life, such as social isolation and absence of a place to go, are already widely recognized, but there are few domestic studies or support policies for this, and the elderly leisure welfare facilities provided by the state do not fully support the elderly's daily life. There are studies related to the elderly's neighborhood environment and facilities, which can be seen as the third place for the elderly in Korea, but these are mostly quantitative studies. In order to talk about the third place for daily support for the elderly in Korea, a detailed study of the use cases of the third place in Korea is needed. This study analyzes the third place of the elderly in Korea and discovers the characteristics and components. Based on the detailed analysis of the third place of the elderly, the characteristics of the third place of the elderly in Korea and the elements constituting it are found to be able to represent the specific necessary environment of the third place of the elderly. Methods: The research targets include 'A Mill' (located in Jungnang-gu, Seoul), and 'Roadside in front of Villa B'(located in Dongdaemun-gu, Seoul), 'C-dong roadside park'(located in Dobong-gu, Seoul) within the range of repeated observations and meetings among the places used as a third place for the elderly was selected. The site survey consisted of in-depth interviews, observational surveys, and participatory observations. In-depth interviews were held for a total of 5 months, from October to December 2019 and from April to May 2020. Results: As a result, a total of 11 characteristics (adjacent to the residence, an open place, an independent space, a comfortable place to stay, a pleasant space, safety is guaranteed, a place that has been operated for a long time, a place that can be used autonomously, a place where social exchange occurs, No financial burden, fun activities) was discovered. Implications: This study is significant in that unlike the existing studies focusing on the use behavior of established institutions or facilities, the elderly identified the necessary environment through their own created places.

• Informatization Policy
• /
• v.28 no.4
• /
• pp.76-92
• /
• 2021

The value of personal information is increasing with the digital transformation of the 4th Industrial Revolution. The purpose of this study is to analyze the efficiency of personal information protection efforts of 2,000 private companies. It uses a stochastic frontier approach (SFA), a parametric estimation method that measures the absolute efficiency of protective activities. In particular, the personal information activity index is used as an output variable for efficiency analysis, with the personal information protection budget and number of personnel utilized as input variables. As a result of the analysis, efficiency is found to range from a minimum of 0.466 to a maximum of 0.949, and overall average efficiency is 0.818 (81.8%). The main causes of inefficiency include non-fulfillment of personal information management measures, lack of system for promoting personal information protection education, and non-fulfillment of obligations related to CCTV. Policy support is needed to implement safety measures and perform personal information encryption, especially customized support for small and medium-sized enterprises.

• Korean Journal of Food Science and Technology
• /
• v.54 no.2
• /
• pp.209-217
• /
• 2022

In this study, Enterococcus faecalis BMSE-HMP005 isolated from human breast milk demonstrated antimicrobial effects against multidrug-resistant (MDR) bacterial strains. The bacteriocin produced by E. faecalis BMSE-HMP005 was fractionated using reverse-phase high-performance liquid chromatography. This fraction showed antimicrobial effects against both gram-positive and gram-negative MDR bacteria. No hemolytic reactions were observed. E. faecalis BMSEHMP005 was resistant to vancomycin; however, kanamycin, ampicillin, and erythromycin showed minimum inhibitory concentrations that were lower than the acceptable range provided by the European Food Safety Authority. For artificial gastric juice and bile acid, the survival rates were 98.67% and 95.70%, respectively. These results show the potential utility of E. faecalis BMSE-HMP005 as a probiotic with remarkable antimicrobial effects against MDR bacteria.

• Journal of Navigation and Port Research
• /
• v.46 no.3
• /
• pp.203-208
• /
• 2022

Recently, various digital technology issues such as e-Navigation, Maritime Autonomous Surface Ship (MASS) and Smart ships have constantly emerged in the maritime industry, based on the fourth industrial revolution. The International Maritime Organization is gradually tightening regulations for marine safety and marine environmental protection, and these strengthened regulations are leading to new maritime industries. Thus, the purpose of this study was to design a suitable model to analyze the industrial competitiveness of domestic autonomous operation technology industry, based on the Porter's diamond model. Based on a total of five evaluation factors and 13 detailed factors, the industrial competitiveness of the domestic autonomous operation technology industry was evaluated qualitatively and quantitatively. This industry, which is in the early stage of industrial development, was evaluated as 16.9 points relative to indexing industrial competitiveness. Currently, it is characterized by the simultaneous development of related regulations and core technologies, from the establishment of the scope of the industry. The industrial competitiveness evaluation considering these industrial characteristics is expected to serve as the basis for strategic support and new industrial policy, and impact a wide range of related industries such as shipping, logistics, ports, and shipbuilding and equipment industries.

• Korean Journal of Remote Sensing
• /
• v.38 no.6_3
• /
• pp.1749-1760
• /
• 2022

In modern society, human and social damages caused by natural disasters and frequent disaster accidents have been increased year by year. Prompt access to dangerous disaster sites that are inaccessible or inaccessible using state-of-the-art Earth observation equipment such as satellites, drones, and survey robots, and timely collection and analysis of meaningful disaster information. It can play an important role in protecting people's property and life throughout the entire disaster management cycle, such as responding to disaster sites and establishing mid-to long-term recovery plans. This special issue introduces the National Disaster Management Research Institute (NDMI)'s disaster management technology that utilizes various Earth observation platforms, such as mobile survey vehicles equipped with close-range disaster site survey sensors, drones, and survey robots, as well as satellite technology, which is a tool of remote earth observation. Major research achievements include detection of damage from water disasters using Google Earth Engine, mid- and long-term time series observation, detection of reservoir water bodies using Sentinel-1 Synthetic Aperture Radar (SAR) images and artificial intelligence, analysis of resident movement patterns in case of forest fire disasters, and data analysis of disaster safety research. Efficient integrated management and utilization plan research results are summarized. In addition, research results on scientific investigation activities on the causes of disasters using drones and survey robots during the investigation of inaccessible and dangerous disaster sites were described.

• Journal of Navigation and Port Research
• /
• v.45 no.6
• /
• pp.306-313
• /
• 2021

National fishing harbour is as a refuge for fishing boats and a breakwater lighthouse is installed as a functional facility in consideration of harbour identification and the safety of passing vessels. In this study, the service level of breakwater lighthouse (234 units) was estimated based on the traffic volume of 105 national fishing harbour. For this purpose, the evaluation items were determined, the fishing harbour standard index was calculated (Fs=1), the proximity of fishing harbour was identified and the function (service level) of the breakwater lighthouse was estimated in the following order. However, national fishing harbour differed in size, traffic volume and fishing vessel capacity. Therefore, 105 national fishing harbour were divided into three groups through cluster analysis. The cluster analysis was based on the service level factors of the breakwater lighthouse, such as the number of weeding fishing vessels, tonnage of fishing vessels, the number of incoming and outgoing vessels per year, and fishing vessel capacity. As a result of the estimation, the service level of the breakwater lighthouse (light tower height, visual height, visual range, interval) was 10.50m, 16.50m, 7.00mile, 5.5sec for group 1, and 10.67m, 16.16m, 8.33mile, and 6.0sec for group 2, The three groups are 11.53m, 16.75m, 6.75mile and 5.0sec. The results of this study can be used as useful basic data for improving the service level of traffic vessels when a breakwater lighthouse is built in a fishing harbour in the future.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.638-649
• /
• 2020

Purpose: The objective of this study is to evaluate the load carrying capacity of a target bridge structure based on the simple slab bridge of concrete over 20 years of public service. Method: By performing static loading test and dynamic loading test, the displacement, strain, impact factor, and natural frequency values were measured and evaluated through analysis method. Result: The main results of this study are as follows. First, the maximum displacement and maximum strain of S1 were assessed at 2.917 mm and 44.720 𝜇ε( tensile) and -13.760 𝜇ε(compression), respectively, with S2 maximum displacement and maximum strain being 2.100 mm and 4.870 𝜇ε(tensile), respectively. Second, the maximum measured impact factor was 0.191 in section S1 A-A, and the maximum measured impact factor was 0.155 in section S2 C-C. Third, the natural frequency was assessed at 6.086 Hz, and the measurement was found to be within the range of 6.152 Hz to 6.738 Hz. Conclusion: The tested bridge may be evaluated to show good behavior and characteristics for the design load.