• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1996.05a
• /
• pp.244-247
• /
• 1996

We had experiment using LB method that can fabricate molecular order ultra-thin film below 100${\AA}$. LB method has known as main technology of information society in 21C, because it is not only free orientation and alignment of molecular but also ability of thickness control as molecular order. In this paper, the fabricated condition and physical properties of functional ultra-thin film of molecular order was investigated and highly efficient ultra-thin film capacitor was fabricated by using ultra-thin LB film for application as electronic device. Possibility of ultra-thin film capacitor was researched by analyzing and measuring electrical properties. Polyimide ultra-thin LB film capacitor was fabricated, ensured theoretically and experimentally its possibility in range of 10Hz∼lMHz through its frequency characteristics.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.13 no.9
• /
• pp.663-670
• /
• 2003

As the micro-technologies in the high precision manufacturing processes are developed, the demand for micro actuating device is increasing. But, it is difficult to achieve high resolution and wide operating range simultaneously with the conventional actuating systems which are contacting and type of dual servo system. So, the contact-free surface actuators whose movers are suspended or levitated were proposed. These systems can be applied to high precision stages and alignment apparatuses. The suspended mover can be assumed to be rigid body, but the mover is a structure in this study, therefore the vibration caused during the operating process has a serious adverse effect on the performance and it is very important to identify the vibrational characteristics. In this paper, a contact-free surface actuator is modeled in finite element method and updated by using the experimental modal data. Finally, the static and dynamic characteristics of the finite element model are predicted and then discussed.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.563-563
• /
• 2012

We report a one-step fabrication of single-crystal organic nanowire arrays on substrates using a new direct printing method (liquid-bridge-mediated nanotransfer moulding, LB-nTM), which can simultaneously enable the synthesis, alignment and patterning of the nanowires using molecular ink solutions. Two- or three-dimensional complex structures of various single-crystal organic nanowires were directly fabricated over a large area with a successive process. The position of the nanowires can be aligned easily on complex structures because the mold is movable on substrates before drying the polar liquid layer, which acts as an adhesive lubricant. This efficient manufacturing method can produce a wide range of optoelectronic devices and integrated circuits with single-crystal organic nanowires.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.10 no.11
• /
• pp.5674-5691
• /
• 2016

Fast IDentity Online(FIDO) supports biometric authentications in an online environment without transmitting biometric templates over the network. For a given FIDO client, the "Fuzzy Vault" securely stores biometric templates, houses additional biometric templates, and unlocks private keys via biometrics. The Fuzzy Vault has been extensively researched and some vulnerabilities have been discovered, such as brute force, correlation, and key inversions attacks. In this paper, we propose a simple fingerprint Fuzzy Vault for FIDO clients. By using the FIDO feature, a simple minutiae alignment, and point-to-point matching, our Fuzzy Vault provides a secure algorithm to combat a variety of attacks, such as brute force, correlation, and key inversions. Using a case study, we verified our Fuzzy Vault by using a publicly available fingerprint database. The results of our experiments show that the Genuine Acceptance Rate and the False Acceptance Rate range from 48.89% to 80% and from 0.02% to 0%, respectively. In addition, our Fuzzy Vault, compared to existing similar technologies, needed fewer attempts.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.126-128
• /
• 2003

The effect of twisting on the microstructure and AC losses of Bi-2223 superconductor tape has been evaluated. Twisting pitches of the tapes are in the range of 12~60 mm and uniformly deformed. The critical current of the tapes was measured to decreased with decreased pitch. This reduction is believed to be due to the irregular interface, poor grain alignment. In addition, AC losses of the tape reduced as the pitch decreased probably due to combined effects of lower critical current and electrically decoupled filament of twisted tape.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2007.04a
• /
• pp.369-374
• /
• 2007

For a stability design of steel frames, AISC-LRFD specification recommend to use Alignment Chart and story-based methods in order to determine an effective budding length. Recently, elastic buckling analysis, which is the method that calculate the effective length of members using eigenvalue of the overall structure, has been widely used in practical design of steel frames because this method can be performed effectively and automatically by computers. However, it can in some cases lead to unexpectedly large effective length in column having small axial forces. Therefore, this paper propose a method using elastic buckling analysis, which estimate a proper effective buckling length for all members having a small axial force. For verification of proposed method, it is compared with system based approach and stiffness distribution factor method. As a result, proposed method can rationally solve a problem in some case of column having small axial force. Also, adoption range for proposed method is established.

• Journal of Sensor Science and Technology
• /
• v.21 no.2
• /
• pp.121-126
• /
• 2012

Piezoresistive type contact force sensor array is fabricated by (111) Silicon bulk micromachining for continuous blood pressure monitoring. Length and width of the unit sensor structure is $200{\mu}m$ and $190{\mu}m$, respectively. The gap between sensing elements is only $10{\mu}m$. To achieve wafer level packaging, the sensor structure is capped by PDMS soft cap using wafer molding and bonding process with $10{\mu}m$ alignment precision. The resistance change over contact force was measured to verify the feasibility of the proposed sensor scheme. The maximum measurement range and resolution is 900 mm Hg and 0.57 mm Hg, respectively.

• International journal of advanced smart convergence
• /
• v.12 no.3
• /
• pp.75-88
• /
• 2023

In a specific domain, experts have different understanding of domain knowledge or different purpose of constructing ontology. These will lead to multiple different ontologies in the domain. This phenomenon is called the ontology heterogeneity. For research fields that require cross-ontology operations such as knowledge fusion and knowledge reasoning, the ontology heterogeneity has caused certain difficulties for research. In this paper, we propose a novel ontology matching model that combines word embedding and a concatenated continuous bag-of-words model. Our goal is to improve word vectors and distinguish the semantic similarity and descriptive associations. Moreover, we make the most of textual and structural information from the ontology and external resources. We represent the ontology as a graph and use the SimRank algorithm to calculate the structural similarity. Our approach employs a similarity queue to achieve one-to-many matching results which provide a wider range of insights for subsequent mining and analysis. This enhances and refines the methodology used in ontology matching.

• Archives of design research
• /
• v.17 no.2
• /
• pp.279-288
• /
• 2004

Corporate design activities have expanded from being exclusive and passive responsibilities to active participation in planning, marketing, technology and corporate brand image differentiation for successful business. Thus the communications between designers and other functions come to include critical decision making, information sharing, and objective reasoning. Given that design activities now have to involve various functions in product development, the styling-related design process, which is still developed by designer's intuition and experience, poses as an obstacle not just between various functions involved, but even within the design function. To overcome this obstacle and to lead more effective design decision process, a means for product form development assessment and management is necessary. This research proposes a foundation for managing and assessing product form based on the hypothesis and demonstration of discovering a system of formative factor and order a product form expresses that can be shared as an objective and logical system. As a result of this demonstration, the form as a unique visual expression and the factors related to the form and its co-relationship are examined. The factors are called formative parameters and the system is named as the product form alignment method. Based on the logic derived from the system, the process for developing an image that aligns with the predefined goal is explained. The method defines a balance between a designer's intuitive creativity and the extracted logic, which can act as a basis for designers to share design language among themselves and for communication between design and other functions. Based on this system, designers are able to align design work with the set goal, and focus and limit the range of form development, which is anticipated to result in lead-time reduction and minimizing unnecessary obstacles and mistakes.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.81-90
• /
• 2016

As an autonomous driving vehicle (AV) need to cope with external road conditions by itself, its perception performance for road environment should be better than that of a human driver. A vision sensor, one of AV sensors, performs lane detection function to percept road environment for performing safe vehicle steering, which relates to define vehicle heading and lane departure prevention. Performance standards for a vision sensor in an ADAS(Advanced Driver Assistance System) focus on the function of 'driver assistance', not on the perception of 'independent situation'. So the performance requirements for a vision sensor in AV may different from those in an ADAS. In assuming that an AV keep previous steering due to lane detection failure, this study calculated lane departure distances between the AV location following curved road alignment and the other one driving to the straight in a curved section. We analysed lane departure distance and time with respect to the allowance of lane detection malfunction of an AV vision sensor. With the results, we found that an AV would encounter a critical lane departure situation if a vision sensor loses lane detection over 1 second. Therefore, it is concluded that the performance standards for an AV should contain more severe lane departure situations than those of an ADAS.