• Journal of Preventive Medicine and Public Health
• /
• v.49 no.4
• /
• pp.249-251
• /
• 2016

Objectives: Nail salon owners in New York City (NYC) are required to provide their workers with gloves and it is their responsibility to maintain healthy, safe working spaces for their employees. The purpose of this study was to determine the frequency with which nail salon workers wear protective gloves. Methods: A Freedom of Information Law request was submitted to New York Department of State's Division of Licensing Services for a full list of nail salons in Manhattan, NYC. A sample population of 800 nail salons was identified and a simple random sample (without replacement) of 30% (n=240) was selected using a random number generator. Researchers visited each nail salon from October to December of 2015, posing as a potential customer to determine if nail salon workers were wearing gloves. Results: Among the 169 salons in which one or more workers was observed providng services, a total of 562 workers were observed. For 149 salons, in which one or more worker was observed providing services, none of the workers were wearing gloves. In contrast, in six of the salons observed, in which one or more workers was providing services, all of the workers (1 in 2 sites, 2 in 1 site, 3 in 2 sites, and 4 in 1 site) were wearing gloves. Almost three-quarters of the total number of workers observed (n=415, 73.8%) were not wearing gloves. Conclusions: The findings of this study indicate that, despite recent media attention and legislation, the majority of nail salon workers we observed were not wearing protective gloves when providing services.

• Journal of the Korea Society of Computer and Information
• /
• v.8 no.2
• /
• pp.112-121
• /
• 2003

Information Protection and cryptography technology is developed with if but solved problem of real time processing and secret maintain. Therefore this paper is Proposed new PRN-SEED(Pseudo-Random Number-SEED) for the increasing secret rate and processing rate perform performance analysis with existed other cryptography algorithms. Proposed new PRN-SEED crypto-algorithm increase in the processing rate than existed algorithms use bit and byte mixed operation with RNG(Random Number Generator). PRN-SEED that performs simultaneous operations have higher 1.03 in the processing rate and 2 in the cryptosystem performance than existed cryptosystems. Implementation for PRN-SEED use Synopsys Design Analyser Ver. 1999.10, samsung KG75 library and Synopsys VHDL Debegger. As a simulation result, symmetric cryptosystem DES operate 416Mbps at the 40MHz and Rijndael operate 612Mbps at the 50MHz. PRN-SEED cryptosystem have gate counting 10K and operate 430Mbps at the 40MHz and 630Mbps at the 50MHz.

• Journal of Astronomy and Space Sciences
• /
• v.31 no.2
• /
• pp.121-130
• /
• 2014

Essential ideas, successes, and difficulties of Areal Density Analysis (ADA) for color-magnitude diagrams (CMD's) of resolved stellar populations are examined, with explanation of various algorithms and strategies for optimal performance. A CMD-generation program computes theoretical datasets with simulated observational error and a solution program inverts the problem by the method of Differential Corrections (DC) so as to compute parameter values from observed magnitudes and colors, with standard error estimates and correlation coefficients. ADA promises not only impersonal results, but also significant saving of labor, especially where a given dataset is analyzed with several evolution models. Observational errors and multiple star systems, along with various single star characteristics and phenomena, are modeled directly via the Functional Statistics Algorithm (FSA). Unlike Monte Carlo, FSA is not dependent on a random number generator. Discussions include difficulties and overall requirements, such as need for fast evolutionary computation and realization of goals within machine memory limits. Degradation of results due to influence of pixelization on derivatives, Initial Mass Function (IMF) quantization, IMF steepness, low Areal Densities ($\mathcal{A}$), and large variation in $\mathcal{A}$ are reduced or eliminated through a variety of schemes that are explained sufficiently for general application. The Levenberg-Marquardt and MMS algorithms for improvement of solution convergence are contained within the DC program. An example of convergence, which typically is very good, is shown in tabular form. A number of theoretical and practical solution issues are discussed, as are prospects for further development.

• Nuclear Engineering and Technology
• /
• v.32 no.5
• /
• pp.433-445
• /
• 2000

The interfacial area concentration (IAC) is one of the most important parameters in the two-fluid model for two-phase flow analysis. The IAC can be measured by a local conductivity probe method that uses the difference of conductivity between water and air/steam. The number of sensors in the conductivity probe may be differently chosen by considering the flow regime of two-phase flow. The four sensor conductivity probe method predicts the IAC without any assumptions of the bubble shape. The local IAC can be obtained by measuring the three dimensional velocity vector elements at the measuring point, and the directional cosines of the sensors. The five sensor conductivity probe method proposed in this study is based on the four sensor probe method. With the five sensor probe, the local IAC for a given referred measuring area of the probe can be predicted more exactly than the four sensor probe. In this paper, the mathematical approach of the five sensor probe method for measuring the IAC is described, and a numerical simulation is carried out for ideal cap bubbles of which the sizes and locations are determined by a random number generator.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.403-411
• /
• 2020

Since the analog circuit of the beta ray sensor circuit for the true random number generator and the power and ground line used in the comparator circuit are shared with each other, the power generated by the digital switching of the comparator circuit and the voltage drop at the ground line was the cause of the decreasein the output signal voltage drop at the analog circuit including CSA (Charge Sensitive Amplifier). Therefore, in this paper, the output signal voltage of the analog circuit including the CSAcircuit is reduced by separating the power and ground line used in the comparator circuit, which is the source of digital switching noise, from the power and ground line of the analog circuit. In addition, in the voltage-to-voltage converter circuit that converts VREF (=1.195V) voltage to VREF_VCOM and VREF_VTHR voltage, there was a problem that the VREF_VCOM and VREF_VTHR voltages decrease because the driving current flowing through each current mirror varies due to channel length modulation effect at a high voltage VDD of 5.5V when the drain voltage of the PMOS current mirror is different when driving the IREF through the PMOS current mirror. Therefore, in this paper, since the PMOS diode is added to the PMOS current mirror of the voltage-to-voltage converter circuit, the voltages of VREF_VCOM and VREF_VTHR do not go down at a high voltage of 5.5V.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.14 no.4
• /
• pp.338-347
• /
• 2021

In this paper, the beta-ray sensor circuit used in the true random number generator was designed using DB HiTek's 0.18㎛ CMOS process. The CSA circuit proposed a circuit having a function of selecting a PMOS feedback resistor and an NMOS feedback resistor, and a function of selecting a feedback capacitor of 50fF and 100fF. And for the pulse shaper circuit, a CR-RC2 pulse shaper circuit using a non-inverting amplifier was used. Since the OPAMP circuit used in this paper uses single power instead of dual power, we proposed a circuit in which the resistor of the CR circuit and one node of the capacitor of the RC circuit are connected to VCOM instead of GND. And since the output signal of the pulse shaper does not increase monotonically, even if the output signal of the comparator circuit generates multiple consecutive pulses, the monostable multivibrator circuit is used to prevent signal distortion. In addition, the CSA input terminal, VIN, and the beta-ray sensor output terminal are placed on the top and bottom of the silicon chip to reduce capacitive coupling noise between PCB traces.

• Journal of Internet Computing and Services
• /
• v.2 no.4
• /
• pp.1-10
• /
• 2001

In this paper, we define requirements for call distribution of service control logic in Intelligent Network, Also, we propose call distribution mechanism for every subscriber with different call distribution rates, The call distribution mechanism had been developed as a function of Premium-rate Service in Intelligent Network. Our call distribution mechanism applies to percentage distribution instead of circular or hierarchical distribution. The call distribution mechanism consists of call input. output. call distribution processing logic part, random number generator, and customers database. We propose the practical implementation of a call distribution mechanism and call distribution decision indicating number computation method. We show three methods, the rand() function in C language, microsecond by system clock, and proposed algorithm, to get call distribution decision indicating number. In order to optimal call distribution mechanism, we estimated the results of three methods on occurrence values and the number of occurrences.

• Journal of KIISE:Computer Systems and Theory
• /
• v.34 no.11
• /
• pp.581-588
• /
• 2007

In Digital Right Management, symmetric cipher is used for content encryption to reduce encryption cost, AES, advanced encryption standard is usually used to multimedia encryption under desktop environment because of its reasonable security level and computation cost. But mobile handheld device often uses slow speed processor and operates under battery-powered environment. Therefore it requires low computation cost and low energy consumption. This paper proposes new stream cipher scheme which combines pseudo random number generator(PRNG) and dynamically generated permutations. Proposed scheme activates PRNG and generates original key streams. Then it generates extended key streams by applying permutation to original sequence. These extended key streams are XORed with plaintext and generate ciphertext. Proposed scheme reduces the usage of PRNG. Therefore this scheme is fast and consumes less energy in comparison with normal stream cipher. Especially, this scheme shows great speed up (almost 2 times) than normal stream cipher scheme in random access.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1276-1284
• /
• 2017

Lightweight Encryption Algorithm (LEA) that was standardized as a lightweight block cipher was implemented with 8-bit data path, and the vulnerability of LEA encryption processor to correlation power analysis (CPA) attack was analyzed. The CPA used in this paper detects correct round keys by analyzing correlation coefficient between the Hamming distance of the computed data by applying hypothesized keys and the power dissipated in LEA crypto-processor. As a result of CPA attack, correct round keys were detected, which have maximum correlation coefficients of 0.6937, 0.5507, and this experimental result shows that block cipher LEA is vulnerable to power analysis attacks. A masking method based on TRNG was proposed as a countermeasure to CPA attack. By applying masking method that adds random values obtained from TRNG to the intermediate data of encryption, incorrect round keys having maximum correlation coefficients of 0.1293, 0.1190 were analyzed. It means that the proposed masking method is an effective countermeasure to CPA attack.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.73-78
• /
• 2018

In this paper, we consider a system where multiple sources are encrypted in separated nodes and sent through their respective public communication channels into a joint sink node. We are interested at the problem on protecting the security of an already existing system such above, which is found out to have correlated encryption keys. In particular, we focus on finding a solution without introducing additional secret keys and with minimal modification to minimize the cost and the risk of bringing down an already running system. We propose a solution under a security model where an eavesdropper obtains all ciphertexts, i.e., encrypted sources, by accessing available public communication channels. Our main technique is to use encoders of universal function to encode the ciphertexts before sending them to public communication channels.