• 한국전기전자재료학회논문지
• /
• 제21권10호
• /
• pp.916-922
• /
• 2008

AC PDP with MgO protective layer coated with the optimum evaporation rate of $5{\AA}/s$ can generate more enhanced efficiency through the vacuum in-line sealing process. However, the optimized process conditions still require the optimum driving scheme on the ramp-up and ramp-down slope of the reset waveform for enhancing the efficiency. In this paper, for the in-situ vacuum sealed PDP with the optimum evaporation rate of MgO protective layer, the address delay time was investigated with various slopes of ramp waveform during a reset ramp-up and ramp-down period. In this study, the minimum statistical delay time was obtained at the ramp-up rate of $6.0 V/{\mu}s$ and the ramp-down rate of $0.7 V/{\mu}s$ of the reset waveform.

• 전기학회논문지
• /
• 제60권7호
• /
• pp.1299-1304
• /
• 2011

A wind turbine (WT) should be shut down as fast as possible to minimize its own damage in a storm-driven situation. Shutdown of a large wind farm requires a power grid to have a ramp-up capability large enough to balance between generation and consumption of electrical energy. This paper proposes a supervised shutdown algorithm of a wind farm to meet a required ramp-down rate in a grid code in the case of a storm-driven situation. The information on the speed and the direction of wind is measured at a wind mast (WM) installed around a wind farm. If the wind speed exceeds a cut-out speed, the number of WTs to be shut down simultaneously is decided to meet a required ramp-down rate of a grid-code. Arrival times to each WT from the WM are calculated and sorted in the order of time. Then a sequence of groups is generated. The shutdown start/end times of each group are decided to avoid superposition between adjacent two groups. The performance of the proposed shutdown algorithm is verified under various storm scenarios. Results indicate that the proposed algorithm can not only protect the wind farm in the case of a storm-driven situation but also meet the required ramp-down rate. In addition, the algorithm can produce more energy than that of a conventional shutdown algorithm.

• 조명전기설비학회논문지
• /
• 제25권10호
• /
• pp.28-37
• /
• 2011

Though Korea has introduced CBP(Cost Based pool) power trading system since 2001, long-term Generation system planning has been executed by government for Cost minimization every 2 years. Until currently the model which is used for Generation system planning and best-mix only considers cost minimization and total yearly or quarterly electricity demand every year. In a view point of one day power supply operation, technical characteristics, like the ramp up/down rate of total generation system, minimum up/down time and GFRQ(Governor Free Response Quantity), are very important. this paper analyzes Optimal Fuel-Mix for 2022 Korea generation system satisfying these constraints of each fuel type and considering pump storage plants, construction cost and $CO_2$ emission charge Using MILP(Mixed Integer Linear Programming) method. Also the sensitivity analysis which follows in future power industry environmental change accomplished.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.959-968
• /
• 2013

This paper presents a new approach with artificial immune system algorithm to solve the profit based unit commitment problem. The objective of this work is to find the optimal generation scheduling and to maximize the profit of generation companies (Gencos) when subjected to various constraints such as power balance, spinning reserve, minimum up/down time and ramp rate limits. The proposed hybrid method is developed through adaptive search which is inspired from artificial immune system and genetic algorithm to carry out profit maximization of generation companies. The effectiveness of the proposed approach has been tested for different Gencos consists of 3, 10 and 36 generating units and the results are compared with the existing methods.

• 한국정보과학회논문지:정보통신
• /
• 제27권1호
• /
• pp.98-107
• /
• 2000

본 논문에서는 멀티캐스트 가용비트율 (Available Bit Rate: ABR) 서비스를 위해 현재 ATM 포럼 등을 통해 제안되고 있는 신속한 폭주 통지 (fast overload indication) 기능을 기존 피드백통합 알고리즘들에 적용하여 이들의 성능을 시뮬레이션을 통해 비교 분석하였다. 성능 분석의 지표로 송신원의 허용된 셀률 (Allowed Cell Rate: ACR), 스위치에서의 큐 길이, 링크 이용 효율, 공평성, 역방향 자원관리 셀 (Backward Resource Management: BRM) 셀의 오버헤드 등을 사용하였다. 분석 결과, 신속한 폭주 통지 기능이 추가된 피드백 통합 알고리즘들은 망에 심각한 폭주가 발생한 경우에 매우 효과적임을 알 수 있었다. 신속한 폭주 통지 기능은 기본적인 피드백 통합 알고리즘에 관계없이 쉽게 추가될 수 있는 반면에, 이러한 기능이 추가된 알고리즘들의 성능은 기본적인 피드백 통합 알고리즘들의 성능에 매우 의존적임을 알 수 있었다.