• Journal of the East Asian Society of Dietary Life
• /
• v.20 no.3
• /
• pp.423-432
• /
• 2010

In order to streamline bread making process that is time-consuming in regard to the characteristics of process, this study focused on microwave irradiation to dough and raising its temperature to monitor potential variations of dough properties and bread quality, and also examined optimum irradiation time to deduce effective ways for streamlining bread making process. According to analyze dough properties depending on microwave irradiation time, it was found that microwave heat (MWH) 2 showed the highest specific volume and oven spring of all and the lowest hardness (i.e. the highest softness). Moreover, MWH 2 scored the highest points in overall preference under sensory characteristics. As a result, it found that 80-second heating of 700 g bread dough, when exposed to microwave irradiation, contributed to the highest quality of bread.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.34-38
• /
• 2003

This study was carried out to investigate the changes of dehydration process and quality of cured leaves with crushed midribs and cut of the yellowed leaves during drying stage of flue-cured tobacco. The crushed midribs of yellowed leaf dried out before raising the highest temperature of midrib drying stage and reduced the curing time by about 20 hours. However, the cut of yellowed leaf was not affected the curing time and dehydration process during drying stage of flue-curing due to a problem with the cut leaves packing excessively in the curing container. The cured weight yield was increased with crushed midrib and cut leaves, and nicotine and sugar contents of cured leaves and quality in terms of dollars per kilogram were decreased with crushed midrib and cut leaves.

• Journal of the Korean Ceramic Society
• /
• v.37 no.4
• /
• pp.338-344
• /
• 2000

Grain boundary chemistry and electrical characteristics of polycrystalline BaTiO3 ceramics, which were prepared with sol-gel surface-coated semiconducting powders, were investigated. Mn ions were coated on the powder surface by sol-gel coating-techniques. The additives coated on the surface of the powders were observed to be present near the grain boundaries of the ceramics. The ceramics exhibit the PTCR characteristics with a resistivity jump ratio(Pmax/Pmin) of about 2$\times$103. With raising the temperature from room temprature to 20$0^{\circ}C$, the oxidation state of the Mn ions varied from Mn3+ to Mn2+ in the coating layers. Near the grain boundaries an excessive negative charge layer of about 20nm was formed.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.21 no.1
• /
• pp.57-64
• /
• 1976

Enforcing germination to the premature seed green vernalization under constant vitalux-A illumination and exposing to higher room temperature during ripening stage, were successively applied during wheat and barley raising for the sake of the accelerating generation advancement in greenhouse. By application of this method, the winter habit variety 'Buheung' required only 77 days for 1 generation and could raise 4.5 generations during one year. one year.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1220-1221
• /
• 2007

Building-integrated photovoltaic(BIPV) perform traditional architectural function of walls and roof while also generating electricity. But most of the absorbed solar energy appears passively as heat, raising the temperature of cells and reducing the efficiency with which the active part is converted into electricity. Therefore this paper presents the comparison of electrical, architectural and thermal performance of roof integrated photovoltaic(PV) modules, which is composed of different hybrid structure layer such as urethane form, waffle stud etc.

• Bulletin of the Korean Chemical Society
• /
• v.20 no.7
• /
• pp.786-790
• /
• 1999

Relatively inert surface of microcrystalline MgO was modified into chemically active one by carrying out controlled hydration followed by dehydration at elevated temperature under dynamic vacuum. Even though the treatment by the first cycle of hydration-dehydration did not alter the porosity of MgO, it largely enhanced surface reactivity of the MgO toward adsorbed water, turning its outer layer into brucite upon rehydration. Treatment by the second cycle of hydration-dehydration generated micropores, and slit-shaped mesopores, raising the porosity of the MgO. The overlayer of Fe2O3 of the core/shell type composite magnesium oxide enhanced this surface modification, turning its surface into more porous and more active one than that of uncoated MgO, after the treatment by the hydration-dehydration.

• Archives of Pharmacal Research
• /
• v.16 no.2
• /
• pp.140-146
• /
• 1993

A colostral protein that augments natural killer (NK) cell activity was isolated from bovine colostrum. This protein, designated matemal immunity enhancing factor (MIEF), increased NK cell-mediated cytotxicity against human tumor targets wheb added to cultures of resting peripheral blood lymphocytes. The NK cell stimulatory activity of the MIEF was demonstrated at the concentrations as low as 0.1-0.01 $\mu$g/ml. Purified MIEF showed an apparent molecular weight of 22,000 in SDS-polyacrylamide gel electrophoresis. The unusual biochemical characteristics of the MIEF distinguish it from other cytokines. The MIEF was soluble at a cold tgemperature, and precipitated by raising the temperature. This themal precipitability was reversible, and dependent on the concentration, pH and ionic strength. Maximal precipitation was observed at neutral pH, and higher ionic strength.

• International Journal of Advanced Culture Technology
• /
• v.11 no.3
• /
• pp.83-88
• /
• 2023

The increasing global average temperature and the emergence of various abnormal climate phenomena are already being experienced in reality. The problems arising from climate change are expanding and becoming catastrophic, despite the efforts of various organizations to prevent them. In order to avoid climate issues from becoming black elephants, we conducted interviews with emergency planning officer from various institutions to identify potential X-events caused by climate change. The results of analyzing the anticipated X-events by these emergency planning officer revealed a chain of ripple effects associated with their occurrence. This implies that once an X-event happens, its influence is broader and more significant. Through this study, we aim to share the understanding of the ripple effects of climate X-events with many people, raising awareness of the severity of climate issues. We hope that this will serve as a starting point for more institutions, individuals, and nations to make efforts in resolving climate problems, turning X-events into opportunities rather than crises.

• Journal of Powder Materials
• /
• v.18 no.2
• /
• pp.141-148
• /
• 2011

Carbon material shows relatively high strength at high temperature in vacuum atmosphere and can be easily removed as CO or $CO_2$ gas in oxidation atmosphere. Using these characteristics, we have investigated the applicability of carbon mold for precision casting of high melting point metal such as nickel. Disc shape carbon mold with cylindrical pores was prepared and Ni-base super alloy (CM247LC) was used as casting material. The effects of electroless Nickel plating on wettability and cast parameters such as temperature and pressure on castability were investigated. Furthermore, the proper condition for removal of carbon mold by evaporation in oxidation atmosphere was also examined. The SEM observation of the interface between carbon mold and casting materials (CM247LC), which was infiltrated at temperature up to $1600^{\circ}C$, revealed that there was no particular product at the interface. Carbon mold was effectively eliminated by exposure in oxygen rich atmosphere at $705^{\circ}C$ for 3 hours and oxidation of casting materials was restrained during raising and lowering the temperature by using inert gas. It means that the carbon can be applicable to precision casting as mold material.

• Resources Recycling
• /
• v.12 no.6
• /
• pp.19-25
• /
• 2003

This experiment was carried out to examine the effect of iron oxide roasting for Sr-ferrite magnet. Chloride content was decreased with raising the 2 nd roasting temperature of iron oxide for ruthner process iron oxide. The optimization temperature for roasting of ruthner process iron oxide was around $800^{\circ}C$ as average particle size 1.5∼1.9 $\mu\textrm{m}$, apparent bulk density 1.4 g/$m\ell$ and chloride content 0.05%. The relation between Br and HcJ by sintering temperature for Sr-ferrite magnet was found to be Br≒-0.258HcJ＋494. In case of having a vibrating disk mill for the ruthner process iron oxide, the magnetic properties were Br 421 mT and HcJ 251 kA/m.