• Structural Engineering and Mechanics
• /
• v.54 no.2
• /
• pp.199-219
• /
• 2015

This paper presents the non-destructive evaluation of a high-speed railway bridge using train-induced strain responses. Based on the train-track-bridge interaction analysis, the strain responses of a high-speed railway bridge under moving trains with different operation status could be calculated. The train induced strain responses could be divided into two parts: the force vibration stage and the free vibration stage. The strain-displacement relationship is analysed and used for deriving critical displacements from theoretical stain measurements at a forced vibration stage. The derived displacements would be suitable for the condition assessment of the bridge through design specifications defined indexes and would show certain limits to the practical application. Thus, the damage identification of high-speed railways, such as the stiffness degradation location, needs to be done by comparing the measured strain response under moving trains in different states because the vehicle types of high-speed railway are relatively clear and definite. The monitored strain responses at the free vibration stage, after trains pass through the bridge, would be used for identifying the strain modes. The relationship between and the degradation degree and the strain mode shapes shows certain rules for the widely used simply supported beam bridges. The numerical simulation proves simple and effective for the proposed method to locate and quantify the stiffness degradation.

• Journal of the Korean Society for Railway
• /
• v.20 no.1
• /
• pp.128-141
• /
• 2017

This paper analyzes the under-researched field of the characteristics of th Chosun private railway, such as laws, systems, human resources, and subsidies associated with this railway, in an effort to increase our understanding of these characteristics. It was found that the private railway shared strong identity resemblance with a national project, as it served to assist the roles of the main national railway. General patterns of change of the company indicate that the private railway received increased subsidies consequent to the amendment of a related law and that it was strongly influenced by Japan's railway policies. The private railway system during the Chosun period more subsidies than those administered by Japan, and they tended to depend on fund raising for external capital. A tendency of many board members to be from the Chosun bureau was also noted. Profits in the private railway system were relatively low compared to those of the national railway such that the deficits were supplemented by the subsidies redeived. Based on corroborating examples, the private railway system can be said to have been an organization that had strong connections with national projects. It was especially related to regional industries according to an examination of the distribution of lines, which shows that most assisted the main railway or coincided with regions undergoing industrial development. Typically, northern areas were for resource development while southern areas were for agricultural production and/or passenger transportation. The company carried dual traits as it operated as a subsidiary enterprise for peripheral profit while also playing a role in transportation.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.904-909
• /
• 2011

The development of train control system shall operate a series of processes like system designing, system production and system performance evaluation as a result of various requirements analysis presented in operation rules, operating guidelines for railway organizations etc, notified by the nation. Therefore, considering operation conditions, operation plan, linkage to railway network etc, the major document like system functional specifications, system development specifications, system test plans etc must be drawn up. In this paper we classify system operating scenarios required to prepare for system standard specification and system performance evaluation report of CBTC system for urban subways supporting unmanned automatic operation, and adjust each of the operating status.

• Journal of the Korean Society for Railway
• /
• v.8 no.3
• /
• pp.260-266
• /
• 2005

The deterioration of a shunting locomotive was characterized for the lifetime assessment. The locomotive has been used for shunting works in steel making processes, and in this investigation, various types of technical evaluation methods for the locomotive parts were employed to assess the current deterioration status and to provide important clue for lifetime prediction. Unlike other rolling stocks in railway applications, the diesel shunting locomotive is composed of major components such as diesel engine, transmission, gear box, brake system, electronic devices, etc., which cover more than 70 percent of the total price of the locomotive. Therefore, in this paper, each part of major components in the diesel locomotive was analyzed in terms of the degree of deterioration. The lift-cycle-cost (LCC) analysis was performed based on the maintenance and repair history as compared with economical cost to provide the cost-effective prediction, i.e., to assess either repair for reuse or putting the locomotive out of service based on cost-effective calculation.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.415-420
• /
• 2005

Korea High Speed Railway of which wheels have been excessively worn during the trial operation prior to opening was additionally applied with solid lubricant besides the existing oil lubricant in order to overcome such excessive wear. Therefore, it was shown that wear status has been improved in the test by which railway system including vehicles and tracks was stabilized during a year's commercial operation, comparing to that with excessive wear in the trial operation prior to opening to the public. In this connection, wheel's wear per mileage was analyzed, based on vehicles in service in order to make out the wheel's wear at present, from which the useful data relating to wheel maintenance could be obtained.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.993-999
• /
• 2007

With the introduction of the RAMS(Reliability, Availability, Maintainability, Safety), the interest of the system assurance has been increased. First of all, fast-growing electronic circuit requires analyzing the failure rates, by dividing the signalling system more specifically. Since 2005, the K.N.R (Korean National Railway) has incorporated ERP(Enterprise Resource Planning) in order to establish the complete status as the top international comprise, therefore while ordering the project, it has established the classification system and then has been applying to ERP system in 2007. Due to the complex of the classification system, the reliability analysis of the signalling system was assessed with the limit of IXL ATP with On-board and wayside equipment. This paper assumed MTBF(Mean Time Between Failure), MTTR((Mean Time Between Repair) of total signalling system, by using the classification of ERP program.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1483-1487
• /
• 2006

In electric railway, image monitoring using high speed camera provides reliable, timely information of wear and geometry status, important in taking decisions for overhead contact wire maintenance. The contribution of this research is the development of a simple real-time monitoring system for use in measurement subsystem of contact wire and geometry of overhead contact wire in electric railway. The system has been consists of a high speed CMOS camera with resolution $1024{\times}1280$ pixels, line type laser source and PC-based image acquisition system with PCI Express slot. Vision acquisition software have been used in application programming interface for image acquisition, display, and storage with a frequency of sampling of 500 acquisitions per second.

• Proceedings of the KSR Conference
• /
• 2009.05b
• /
• pp.341-347
• /
• 2009

In high speed railway, event recorder system stores a train speed and the related data for train operation in real time. Using those information, we can analysis the train operation and the reason of train accident. Analysis software gets the stored data from Event Recorder and shows the status of various signals related with train operation. Using it, also we can analysis the train operation before and after the given time. In this paper we propose the analysis software to show and analysis the operation of high speed train. The method of transferring the stored data from Event Recorder into Analysis Software is proposed. We develop the efficient procedure to store the transferred data into analysis system. Also the effective method to show the store data and to analysis them is studied for finding the cause of train accident.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.132-139
• /
• 2008

In an electric railway feeding system, transient over-voltage often appears due to the feeder's direct lightning and induced lightning, while switching over-voltage also frequently occurs during operation of electric feeding in substation facilities. Such over-voltage is several times larger than the regular power, and accordingly leads to the dieletric breakdown of eletric power products such as invasion transformers and circuit breakers. Arresters are installed to protect these machines, while arrester counters are installed to observe the arrester's activation. This thesis aims to explore the status of an arrester counter that is being activated several thousand times, determine whether the arrester has actually been activated in relation to the counter, and investigate the over-heatedness and risks of the arrester.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1049-1058
• /
• 2011

Current status of the low-to-medium speed Urban MagLev Systems were studied, for Korean UTM(Urban Transit Maglev), Japanese HSST(High Speed Surface Transport) and Chinese CMS(Chinese Maglev System). Mainly, process of development, testing facilities, specifications of maglev systems and public service program were compared respectively.