• Journal of the Korean Society for Railway
• /
• v.16 no.3
• /
• pp.189-195
• /
• 2013

Recent trains have broadband train communication networks to improve train operation safety and to provide passengers with multimedia services. Compared to glass optical fiber, plastic optical fiber (POF) has a large diameter; it also provides the good durability and maintainability necessary to railway applications. This paper suggests an All-IP broadband train communication network that connects all devices in the train through a POF interface. Performance tests according to Korean railroad standards shows that this POF interface is usable in the range of vibration and temperature conditions encountered in trains. A dedicated Layer-2 switch with the POF interface is developed for the construction of the All-IP train communication network. A prototype 1Gbps train communication network was set up in a trial-run of train on a metro line using the developed Layer-2 switch and POF. On-track tests indicated the feasibility of the POF train communication network. POF has an additional advantage of economic feasibility, and it is expected to start a trend toward broadband train communication networks using POF.

• Journal of the Korean Society for Railway
• /
• v.17 no.6
• /
• pp.402-409
• /
• 2014

Wireless local area network (WLAN) is a widely used wireless access method due to its easy usability and excellent performance. However, its performance degrades significantly as the number of users increases. In busy train stations, where the number of WLAN users are large and, more importantly the number of simultaneous packet transmission attempts is extremely large due to the time synchronization upon train arrival, the packet transmission delay problem is very severe and almost impossible for WLAN stations to initiate communication with WLAN networks. In this paper, a novel distributed WLAN access scheme for efficient WLAN communication in busy train stations is proposed. Using the proposed scheme, WLAN access delay can be significantly reduced under highly congested traffic environments. Therefore, a significant performance enhancement for the WLAN performance used in the Communication Based Train Control (CBTC) can be achieved.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.3
• /
• pp.521-528
• /
• 2022

The beginning of a new railroad history is progressing every year. Seoul's Sillim Line is a new transportation system based on communication technology. Sillim Line is the nation's first wireless communication-based unmanned train control system based on KTCS-M, the national standard. The use of wireless communication technology in the rail transportation system suggests the possibility of exporting to the global rail market. This is the result of the government's development and implementation of various support policies for nurturing the domestic railway industry and for export. In this paper, the status of support for localization of railroad industry technology implemented by the state is reviewed, and the process by which railroad parts are replaced by localized parts is analyzed out of dependence on foreign countries. A study was conducted on the development of a technical support platform to solve the technical difficulties of the industry that occurred in this process.

• Journal of The Korean Society For Urban Railway
• /
• v.6 no.4
• /
• pp.279-286
• /
• 2018

Recently, a safety control platform to monitor the safety of train operation in real time and prevent accidents and risks through control is under study. In the initial design, DDS communication method supporting distributed network is adopted for real-time processing of large amount of data according to the integration of existing distributed safety data. However, communication between server and console inside the safety control platform is applied to existing TCP socket communication. In the case of TCP socket communication, it is possible to process data for a small system of a safety control test bed by one-to-one communication. However, if the data is expanded all over the country in the future, it becomes difficult to cope with a case where communication traffic occurs due to vast amount of data. In this paper, we propose DDS communication method to support distributed network between server and console of security control platform, and demonstrate TCP socket and DDS method, and compare throughput and speed. As a result, we have found that the scalability and flexibility are improved in case of applying DDS communication to future systems.

• Proceedings of the KSR Conference
• /
• 2003.05a
• /
• pp.468-473
• /
• 2003

CCTV network has been implemented to transmit the image information of platfo gate and transfer section to local headquarters in the KNR(Korean National Railroa But. communication system for transferring image information around accident field has not been established yet. thus, at present implementation of communication equipment is necessary for dyn of unspecified accident to be transmitted to headquarters. Copper cable communication network is run by KNR, but it is processing installatio optics cable in connection with the implemental plan for high-speed network from n And, the capacity of communication channel will be guaranteed much more than een station and station, station and central headquarters when fiber optics cable is This study analyzes the image equipment of field for transmission and estimated m transmit image information of accident field to headquarters with using communicat ucture. And, the study considers implemental method of communication network for nce image transmission from dozens to hundreds kilometers.

• Journal of the Korean Society for Railway
• /
• v.10 no.1 s.38
• /
• pp.88-95
• /
• 2007

TCN(Train Communication Network) adopts the master/slave protocol to implement real-time communication. In this network, a fault on the master node, cased by either hardware or software failure, makes the entire communication impossible over TCN. To reduce fault detection and recovery time, this paper propose the contention based mastership transfer algorithm. Slave nodes detect the fault of master node and search next master node using the proposed algorithm. This paper also shows the implementation results of a SoC-based Fault-Tolerant MVB Controller(FT-MVBC) which includes the fault-detect-logic as well as the MVB network logic to verify this algorithm.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.7
• /
• pp.819-825
• /
• 2014

The diurnal range of temperature in korea is increasing. We know that the environment has deteriorated through report about railway damage and economic loss caused by climate. In these conditions, Monitoring device for railway must operate to support the operations and maintenance. Therefore, In this paper, COM-based monitoring device implemented using Industrial-Extended electronic components and made, We tested compliance about temperature environment of actual railway. We verified through testing about cold and dry heat of monitoring device. Used components in this product will be able to utilize the development of the railway industry of electronics.

• Proceedings of the KIEE Conference
• /
• 2004.04a
• /
• pp.244-246
• /
• 2004

Compared with other transport means, safety and timeliness are the merits of railways. Unexpectedly when accident happens, much time and human strength are required to cope with the accident. And for swift recovery, systematic rehabilitation is needed. Recently using MTS(Moving picture Transmission System), we can perform accident rehabilitation and recording work efficiently. MTS is the device that transmits continuous picture information from accident field to control center. We are developing the appropriate system to railway situation to make use of the existing information communication technology, processing technology of video-tex, super high speed transmission technology through fiber-optic, copper cable and network description of information Technology, etc. If these communication-based can technologies are applied to railway system, railway managers can control the accident by inspecting the picture of accident field and can contribute to the safe train operation and the improvement of railway management. In this paper, we investigate the connecting methods when optical fiber is used for moving picture data transmission of train accidents, and its problems. And, we validate MTS's performance through about 28km section of field test.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.1-10
• /
• 2021

The type approval system for railway vehicle has been in effect since 2016 in order to establish a regular safety management system to secure railway safety and enhance the technological competitiveness of the railway industry, abolished the conventional performance test system through the reform of the Railroad Safety Act in 2012. Until now, there has been appreciated it has been making significant contributions to railway safety and industry of operation and manufacturing companies, taking their place in accordance with the implementation of the system. But there has been no case of quantitative analysis on the effectiveness of the actual system. In this study, in order to examine the full-scale performance of the approval system and quantitatively analyze effectiveness, we identified and defined the relationships with the major elements of the type approval system based on system thinking principle and determined the calculated outcomes to relevant stakeholders. A method of establishing a type approval performance management system that can be grasped, utilized, and adjusted from a point of various stakeholders' views was proposed. This is expected to be more helpful in the implementation of the system, such as improving and applying quantitative effects to analysis by closely reviewing the effects and influencing factors of the type approval system based on the data accumulated through continuous performance management and reflecting to system improvement.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.825-830
• /
• 2005

Traffic control is the center of the railway traffic control system. The main objective of railway traffic control system is to minimize delays, providing the customers with on-time train operating service according to the given train schedule. Particularly, within the station control area, the departure & arrival of train. the decision on the train priority and the shunting of train are decided by the authority of the local traffic controller. Therefore, it is necessary to have a lot of information and communications between each departments. And for such decision making of the local traffic controller, not only the communication between each stations are needed, but also the communication between other stations are needed too. In this paper, we have analyzed the main work of the local traffic controller in large scale stations and have designed the station traffic control system needed to be built within the station considering the local traffic. And we have proposed not only the communication with other system within station, but also the communication methods for communications with the neighboring stations.