• Journal of Electrical Engineering and Technology
• /
• v.8 no.1
• /
• pp.118-123
• /
• 2013

This paper presents performance comparison between concentrated winding and distributed winding of IPMSM (Interior Permanent Magnet Synchronous Motors) which is recently used for light-weight railway applications. Motors are designed on various schemes and analyzed by using FEM (Finite Element Method) instead of EMCNM (Equivalent Magnetic Circuit Network Method) in order to take into account saturation and non-linear magnetic property. The overall performance such as torque, torque ripple, losses, demagnetization, efficiency, power density and so on are investigated in detail at the rated and maximum operating speed. The results of the analysis found that both concentrated and distributed winding IPMSMs are promising candidates for high power railway traction motor.

• Journal of Electrical Engineering and Technology
• /
• v.6 no.3
• /
• pp.364-368
• /
• 2011

The super-speed tube train was introduced to increase the speed of ground transportation. It levitates magnetically and runs in a partial vacuum tube, which significantly reduces air resistance. However, strong magnetic force sufficient to propel the massive train can affect the infrastructure. The induced eddy current produces joule heat, and raises the inside temperature of the girder, which might lead to electrochemical corrosion on the girder, thereby weakening its durability. In this paper, the authors analyzed the magnetic flux and induced eddy current in the reinforced concrete girder by using three-dimensional FEM, particularly by varying the number of reinforcing steels of the upper flange of the girder to the condition of almost the same flexural strength and reinforcing steel amount.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.261-262
• /
• 2006

This study was intended to research the displacement characteristics of dampers for Korea hish-speed rolling-stock for the purpose of developing the protective and maintenance technology of damper. For this, we measured the displacements of dampers in the actual running conditions of high speed railway vehicles. Displacement data were analyzed depending on the service sections, with which the valuable data necessary for maintenance in the future could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.5
• /
• pp.543-550
• /
• 2011

The development of railway vehicles such as new mechanism of railway vehicle or design parameters of suspension have been used the application of scaled roller rig to the study of railway vehicle dynamics. In this paper, the critical speed was compared between full scale and 1:5 scale of numerical model. And to verify the simulation results, the critical speed was confirmed using the 1:5 scaled roller rig. According to the results, we expect that the developed roller rig will be used in the study for the dynamic characteristics of railway vehicle.

• Proceedings of the KIEE Conference
• /
• 1999.07a
• /
• pp.424-426
• /
• 1999

In this paper, the design characteristics, the manufacturing process and the results of performance test on the AC traction motor for urban transit standard E.M.U which is newly developed with applying standardization specification will be introduced. It is reviewed that the design and performance analysis on conventional motors considering system correlation and design constraint and the design optimization through an analysis of electro-magnetic, thermal and dynamic properties. The properties of factory products manufactured by 200 Class VPI process exhibit a excellent performance with a lower noise and vibration, higher efficiency and power factor etc.

• International Journal of Railway
• /
• v.6 no.3
• /
• pp.107-111
• /
• 2013

In order to constrain the railway roadbed settlement which causes track irregularity, and thus threats running stability and ride quality, advanced Back-to-Back (BTB) reinforced retaining wall was numerically analyzed as railway roadbed structure. This study is intended to improve conventional Back-to-Back reinforced retaining wall as the technology which would reduce the roadbed settlement in a way of constraining the lateral displacement of its prestressed vertical facing and inducing arching effects in roadbed (backfill) placed between masonry diaphragm wall and vertical facing. As a result of numerical analysis, it was found that the roadbed settlement was reduced by 10% due to the prestressed vertical facing and embedded masonry diaphragm wall of the advanced Back-to-Back reinforced retaining wall system.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.87-92
• /
• 2009

Many critical control systems are developed using formal methods. When software applied to such systems is developed, the employment of formal methods in the software requirements specification and verification will provide increased assurance for such applications. Earlier errors of overlooked requirement specification can be detected using the formal specification method. Also, the testing and full verification to examine all reachable states using model checking to undertake formal verification are able to be completed. In this paper, we proposed an eclectic approach to incorporate Z(Zed) formal language and 'Statemate MAGNUM', formal method tools using Statechart. Also we applied the proposed method to train control systems for the formal requirement specification and analyzed the specification results.

• Proceedings of the KIEE Conference
• /
• 2003.07b
• /
• pp.1329-1331
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.183-185
• /
• 2009

자기부상열차는 자기력에 의해 차량이 부상되어 전용선로를 따라 비접촉으로 운행되는 철도운송시스템이다. 자기부상열차에서는 열차가 운영 선로위에 부상되어 비접촉으로 운행되기 때문에 일반 철도시스템에서 적용되고 있는 측위기술의 적용이 어렵다. 따라서 자기부상열차에는 다양한 측위기술들이 개발되어 적용 되고 있다. 본 논문에서는 자기부상열차에 적용중인 다양한 측위기술 및 측위장치에 대하여 검토하고, 독자적인 초고속자기부상열차 개발시 필요한 열차위치검지기술의 개발방향을 제시한다.

• Proceedings of the KIEE Conference
• /
• 2009.04b
• /
• pp.192-194
• /
• 2009

Came to make a many development from the domestic railroad operation. The light rail transit enterprise is constructed plentifully. Consequently, the passenger safety importantly this, is recognized. The safety device which is applied in train control technique of the new railroad enterprise is important. Respects the updated technology development and an introduction of train control the safeguards is applied. Consequently, From the present paper researched the type and a technical development present condition of perception technique from platform safety device.