• 한국항해항만학회지
• /
• 제35권5호
• /
• pp.455-462
• /
• 2011

2011년 3월 11일에 발생한 동일본대지진으로 인해 후쿠시마 원전사고가 발생하여 방사능오염손해에 대한 우려의 목소리가 높다. 특히 방사능오염손해는 선박의 안전항행에 위협이 될 뿐만 아니라, 선원의 안전과 해상운송을 통한 세계 경제의 건전한 발전을 저해시키는 원인으로 작용할 우려가 있다. 선박 또는 화물이 방사능오염손해를 입은 경우에 이러한 방사능오염물질을 제거하는데 상당한 비용이 소요될 것이며, 부득이한 경우에는 선박과 적하를 폐기처분해야 하는 경우도 발생한다. 또한 선원이 방사능에 피복될 경우 이러한 선원에 대한 치료 문제도 발생할 수 있다. 하지만 현재 방사능오염손해에 대한 사후적 대비책으로써 어떠한 방법과 근거에 의하여 보험 보상이 이루어지는지 여부가 명확하게 검토되고 있지 않은 상황이다. 따라서 이 논문에서는 방사능오염으로 인한 피해의 사후적 대비책으로써 방사능오염손해에 대한 해상보험에서의 보상 문제를 검토하고자 한다.

• 대한방사선기술학회지:방사선기술과학
• /
• 제44권5호
• /
• pp.481-487
• /
• 2021

This study was conducted for the purpose of efficient radioactive waste disposal and management. Experiment was evaluated the decontamination efficiencies of the four types decontamination materials(Water, Alcohol, Decontamination Water, Decontamination Gel) with radioactive wastes generated during radio-pharmaceutical production process at Korea Institute Radiological and Medical Sciences(KIRAMS). The radioactive waste sample used in experiment is a lead plate of the fume hood that was disposed in April, 2019. In the experimental method, radioactive waste was measured before and after decontamination using a HPGe semiconductor detector and Gamma survey meter. The measured values before and after decontamination were evaluated for decontamination efficiency as a percentage. As a result, it was confirmed that a lot of specific activity and surface dose rate was removed from the radioactive wastes. In particular, when decontamination water was used, most of the radioactivity of radioactive wastes was removed. Considering these results, if decontamination water is used in decontamination of radioactive waste, decontamination efficiency equivalent to the disposition criteria can be expected with just one decontamination treatment. In addition, in the case of water and alcohol, only on decontamination was effective in approximately 75% and 95%. Otherwise, when decontamination gel was used, it was confirmed that the largest deviation occurred among all experimental results.

• Nuclear Engineering and Technology
• /
• 제54권2호
• /
• pp.507-513
• /
• 2022

When X-ray energy above 8 MV is used, photoneutrons are generated by the photonuclear reaction, which activates the components of linear accelerator (linac). Safely managing the radioactive material, when disposing linac or replacing components, is difficult, as the standards for the radioactive material management are not clear in Korea. We surveyed the management status of radioactive components occurred from medical linacs in Korea. And we also measured the activation of each part of the discarded Elekta linac using a survey meter and portable High Purity Germanium (HPGe) detector. We found that most medical institutions did not perform radiation measurements when disposing of radioactive components. The radioactive material was either stored within the institution or collected by the manufacturer. The surface dose rate measurements showed that the parts with high surface dose rates were target, primary collimator, and multileaf collimator (MLC). ⁶⁰Co nuclide was detected in most parts, whereas for the target, ⁶⁰Co and ¹⁸⁴Re nuclides were detected. Results suggest that most institutions in Korea did not have the regulations for disposing radioactive waste from linac or the management procedures and standards were unclear. Further studies are underway to evaluate short-lived radionuclides and to lay the foundation for radioactive waste management from medical linacs.

• Nuclear Engineering and Technology
• /
• 제54권4호
• /
• pp.1206-1212
• /
• 2022

Cold-crucible induction melting (CCIM) technology has been intensively studied as an advanced vitrification process for the immobilization of highly radioactive waste. This technology uses high-frequency induction to melt a glass matrix and waste, while the outer surface of the crucible is water-cooled, resulting in the formation of a frozen glass layer (skull). In this study, for the fabrication of borosilicate glass waste form, CCIM operation test with 60 kg of glass per batch was conducted using surrogate wastes composed of Cs, Sr, and Nd as a representative of highly radioactive nuclides generated during spent nuclear fuel management. A 60 kg-scale glass waste form was successfully fabricated through melting and draining processes using a CCIM system, and its physicochemical properties were analyzed. In particular, to enhance the controllability and reliability of the draining process, an air-cooling drain control method that can control draining through air-cooling near drain holes was developed, and its validity for draining control was verified. The method can offer controllability on various draining processes, such as molten salt or molten metal draining processes, and can be applied to a process requiring high throughput draining.

• Nuclear Engineering and Technology
• /
• 제54권12호
• /
• pp.4441-4448
• /
• 2022

The electrochemical oxidation process has been widely studied in the field of wastewater treatment for the decomposition of organic materials through oxidation using ·OH generated on the anode. Pt anode electrodes with high durability and long-term operability have a low oxygen evolution potential, making them unsuitable for electrochemical oxidation processes. Therefore, to apply Pt electrodes that are suitable for long-term operation and large-scale processes, it is necessary to develop a new method for improving the decomposition rate of organic materials. This study introduces a method to improve the decomposition rate of organic materials when using a Pt anode electrode in the electrochemical oxidation process for the treatment of organic decontamination liquid waste. Electrochemical decomposition tests were performed using sodium dodecylbenzenesulfonate (SDBS) as a representative organic material and a Pt mesh as the anode electrode. Y₂O₃ particles were introduced into the electrolytic cell to improve the decomposition rate. The decomposition rate significantly improved from 21% to 99%, and the current efficiency also improved. These results can be applied to the electrochemical oxidation process without additional system modification to enhance the decomposition rate and current efficiency.

• Nuclear Engineering and Technology
• /
• 제56권4호
• /
• pp.1153-1164
• /
• 2024

In recent years, unmanned ground vehicles (UGVs) have been used to search for lost or stolen radioactive sources to avoid radiation exposure for operators. To achieve autonomous localization of radioactive sources, the UGVs must have the ability to automatically determine the next radiation measurement location instead of following a predefined path. Also, the radiation field of radioactive sources has to be reconstructed or inverted utilizing discrete measurements to obtain the radiation intensity distribution in the area of interest. In this study, we propose an effective source localization framework and method, in which UGVs are able to autonomously explore in the radiation area to determine the location of radioactive sources through an iterative process: path planning, radiation field reconstruction and estimation of source location. In the search process, the next radiation measurement point of the UGVs is fully predicted by the design path planning algorithm. After obtaining the measurement points and their radiation measurements, the radiation field of radioactive sources is reconstructed by the Gaussian process regression (GPR) model based on machine learning method. Based on the reconstructed radiation field, the locations of radioactive sources can be determined by the peak analysis method. The proposed method is verified through extensive simulation experiments, and the real source localization experiment on a Cs-137 point source shows that the proposed method can accurately locate the radioactive source with an error of approximately 0.30 m. The experimental results reveal the important practicality of our proposed method for source autonomous localization tasks.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.244-250
• /
• 2003

본 논문에서는 황사빗물이 중ㆍ저준위 방사성 폐기물 시멘트 고화체에 미치는 영향을 알아보았다. 실험은 ANS 16.1 실험법을 채택하였다. Co 핵종을 포함한 시멘트 고화체를 제작한 후, 대기 중 황사성분의 질량농도를 이용해 침출수의 부피, 이온 및 금속의 농도 등을 결정한다. 실험을 위해 대기 중 황사 부하량이나 강수에 포함되는 황사성분의 양, 처분장의 면적 등은 적합한 가정을 통해 결정하였다. 본 논문에서는 황사의 특성에 대해 간략히 소개하고 침출 실험의 준비과정으로 실험 조건을 결정한 후에, 90일간의 침출실험을 통해 나온 결과로 황사빗물에 의한 시멘트 고화체의 영향을 평가ㆍ분석하였다.

• 방사성폐기물학회지
• /
• 제12권2호
• /
• pp.165-169
• /
• 2014

원자력발전을 지속가능한 에너지원으로 활용하기 위해서는 원전 해체 및 운영 과정에서 발생하는 방사성폐기물의 안전하고 효율적인 처분이 매우 중요하다. 방사성폐기물 종류는 다양하지만 해체과정에서 가장 많이 발생할 것으로 예상되는 극저준위방사성폐기물 인수기준수립은 원전해체전략수립에 큰 영향을 줄 것으로 보인다. 본 연구에서는 영국과 미국의 극저준위방사성폐기물처분장 인수기준을 경주에 건설 중인 원자력환경센터의 인수기준과 비교분석을 통해 향후 우리나라 극저준위방사성폐기물 처분을 위한 폐기물 인수기준을 분석하고자 한다.

• 방사성폐기물학회지
• /
• 제19권1호
• /
• pp.133-140
• /
• 2021

This study evaluates the radioactivity of concrete waste that occurs due to large amounts of decommissioned nuclear wastes and then determines the surface dose rate when the waste is packaged in a disposal container. The radiation assessment was conducted under the presumption that impurities included in the bio-shielded concrete contain the highest amount of radioactivity among all the concrete wastes. Neutron flux was applied using the simplified model approach in a sample containing the most Co and Eu impurities, and a maximum of 9.8×104 Bq·g-1 60Co and 2.63×105 Bq·g-1 152Eu was determined. Subsequently, the surface dose rate of the container was measured assuming that the bio-shield concrete waste would be packaged in a newly developed disposal container. Results showed that most of the concrete wastes with a depth of 20 cm or higher from the concrete surface was found to have less than 1.8 mSv·hr-1 in the surface dose of the new-type disposal container. Hence, when bio-shielded concrete wastes, having the highest radioactivity, is disposed in the new disposal container, it satisfies the limit of the surface dose rate (i.e., 2 mSv·hr-1) as per global standards.

• 방사성폐기물학회지
• /
• 제19권2호
• /
• pp.267-270
• /
• 2021

Long-term experiments have been conducted on two important safety issues: long-term durability of a concrete barrier with the steel reinforcements and gas generation from low-and intermediate-level wastes in an underground research tunnel of a radioactive waste disposal facility. The gas generation and microbial communities were monitored from waste packages (200 L and 320 L) containing simulated dry active wastes. In the concrete experiment, corrosion sensors were installed on the steel reinforcements which were embedded 10 cm below the surface of concrete in a concrete mock-up, and groundwater was fed into the mock-up at a pressure of 2.1 bars to accelerate groundwater infiltration. No clear evidence was observed with respect to corrosion initiation of the steel reinforcement for 4 years of operation. This is attributed to the high integrity and low hydraulic conductivity of the concrete. In the gas generation experiment, significant levels of gas generation were not measured for 4 years. These experiments are expected to be conducted for a period of more than 10 years.