• Journal of Broadcast Engineering
• /
• v.6 no.3
• /
• pp.246-259
• /
• 2001

Due to recent rapid deployment of Internet streaming service and digital broadcasting service, the issue of how to efficiently support streaming workload in so called "Internet Home Appliance" receives prime interests from industry as well as academia. The underlying dilemma is that it may not be feasible to put cutting edge CPU, boards, disks and other peripherals into that type of device. The primary reason is its cost. Usually, Internet Home Appliances has its dedicated usage, e.g. Internet Radio, and thus it does not require high-end CPU nor high-end Va subsystem. The same reasoning applies to I/O subsystem. In Internet Home Appliances dedicated to handle compressed moving picture, it is not equipped with high end SCSI disk with fast rotational speed. Thus, it is mandatory to devise elaborate software algorithm to exploit the available hardware resources and maximize the efficiency of the system. This paper presents our experiences in the design and implementation of a new multimedia file system which can efficiently deliver the required disk bandwidth for a periodic I/O workload. We have implemented the file system on the Linux operating system, and examined itsperformance under streaming I/O workload. The results of the study show that the proposed file system exhibits superior performance than the Linux Ext2 file system under streaming I/O workload. The result of this work not only contribute to advance the state f art file system technology for multimedia streaming but also put forth the software which is readily available and can be deployed. deployed.

• International Commerce and Information Review
• /
• v.16 no.4
• /
• pp.55-75
• /
• 2014

Non-parametric method such as technology efficiency, DEA/Window model and Malmquist Productivity Index (MPI) are used to measure efficiency and productivity of ICT (Information and Communication Technology) manufacturing industry and service industry over the period 2007-2011. The results of this paper indicate following: (1) Technology efficiency of the ICT manufacturing industry were found as the range of 0.34 and 0.39 over the sample period. Technology efficiency of the ICT service industry were found as the range of 0.16 and 0.20 over the sample period. (2) The geometric average of the Malmquist TFP indexes on ICT manufacturing industry indicated the productivity improvement an average of 8.3 percent. The geometric average of the Malmquist TFP indexes on ICT service industry indicated the productivity improvement an average of 1.6 percent. (3) TIER analysis result on ICT manufacturing industry showed that optimal bench marking made by storage devices${\rightarrow}$wireless communication equipment${\rightarrow}$broadcasting equipment${\rightarrow}$radio, recording and playback devices${\rightarrow}$computers, printers, video and audio-visual equipment path. TIER analysis result on ICT service industry indicated that optimal bench marking made by computers and packaged software${\rightarrow}$wired communication${\rightarrow}$communication, information, detection equipment${\rightarrow}$consulting and construction for computer systems integration${\rightarrow}$industrial machinery and equipment rental${\rightarrow}$telecommunications reseller${\rightarrow}$system software development and delivery${\rightarrow}$hosting path.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2010.04a
• /
• pp.151-153
• /
• 2010

In this paper, the tri-band planar monopole microstrip antenna which stimulaneously meets the three bands such as TRS, WLAN and DMB is designed. The designed antenna size was smaller using CPW-fed structure that shows a ground-plane and a patch-plane are existed at one layer. The proposed antenna is designed on FR-4 substrate with a relative dielectric constant 4.3, thickness of 1.5mm and tangent loss 0.04. The designed antenna shows that VSWR is below 2 and has good return loss below -10dB over the three bandwidths.

• Journal of Broadcast Engineering
• /
• v.21 no.5
• /
• pp.662-671
• /
• 2016

In this paper, we propose a wireless video transmission system, providing medium and long communication distance in the 5.8GHz band to decrease the loss of video data. Beamforming with multiple antennas in a radio environment to enable more than 10km communication distance and an image transmission method that combines the retransmission to MCS(modulation and coding scheme) are applied. By applying the proposed method in the indoor environment of 80dB attenuation using the payload size of 1000 bytes, the packet loss rate of at least 0.92% is achieved through the FPING with the time-out of 10ms. The transmission distance of 21.2Km is achieved with the transmission rate of 13Mbps in the outdoor environment.

• International journal of advanced smart convergence
• /
• v.4 no.2
• /
• pp.94-102
• /
• 2015

Optical camera communication (OCC) is an extension of Visible Light Communication. Different from traditional visible light communication, optical camera communications is an almost no additional cost technology by taking the advantage of build-in camera in devices. It was became a candidate for communication protocol for IoT. Camera module can be easy attached to IoT device, because it is small and flexible. Furthermore almost smartphone equip one or two camera for both back and font side with high quality and resolution. It can be utilized for receiving the data from LED or positioning. Actually, OCC combines illumination and communication. It can supply communication for special areas or environment where do not allow Radio frequency such as hospital, airplane etc. There are many concept and experiment be proposed. In this paper we proposed utilizing Android smart-phone camera for receiver and introduce new approach in modulation scheme for LED at transmitter. It also show how Manchester coding can be used encode bits while at the same time being successfully decoded by Android smart-phone camera. We introduce new data frame format for easy decoded and can be achieve high bit rate. This format can be easy to adapt to performance limit of Android operator or embedded system.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.638-645
• /
• 2013

For the efficient use of the insufficient frequency resources, a precise prediction of field strength based on various propagation environments should be set up to design of radio stations with reliable transmit power and service coverage. Therefore, many countries have tried to secure the propagation models suitable for their each geographical environments, and also, some models like BCAST were developed by Korea, but these models give the different results compared to measured values. In this paper, based on the measurements of DTV broadcasting services in domestic rural area, analysis and comparison of ITU-R P.1546 and BCAST models provide errors between measured and predicted values, and some points for improving SMI system has been proposed. As a result, P.1546 model provides the valid predicted data similar to measured data, but BCAST model has some problems of large deviation and higher prediction to measured data. In future, these problems and fading loss due to a forest or group of trees, and reflection loss due to a lake or sea need to be studied carefully.

• Convergence Security Journal
• /
• v.18 no.4
• /
• pp.73-79
• /
• 2018

Since 1910s, the drones were mainly used for military purposes for reconnaissance and attack targets, but they are now being used in various fields such as disaster prevention, exploration, broadcasting, and surveillance of risk areas. As drones are widely used from military to civilian field, hacking into the drones such as radio disturbance, GPS spoofing, hijacking, etc. targeting drones has begun to occur. Recently, the use of drones in hacking into wireless network has been reported. If the artificial intelligence technology is applied to the drones in the military, hacking into unmanned combat system using drones will occur. In addition, a drone with a hacking program may be able to relay a hacking program to the hacking drone located far away, just as a drone serves as a wireless communication station. And the drones will be equipped with a portable GPS jamming device, which will enable signal disturbance to unmanned combat systems. In this paper, we propose security threats and the anticipated hacking scenarios using the drones on the battlespace to know the seriousness of the security threats by hacking drones and prepare for future cyberspace.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.8
• /
• pp.1074-1081
• /
• 2021

It has recently been noticed that the headway of unlicensed wireless technology is necessary as user's demands of wireless tech increase and the development of high-speed data service by using low-power short-range wireless network is needed. Hence, it is inevitable to study sharing and coexistence for broadband spectrum of diverse unlicensed application with wide bandwidth. In this paper, an interference examination between unlicensed WiFi (Wireless Fidelity) in the 6GHz and OB (Outside Broadcasting) system which is an incumbent service in the same frequency band was conducted and it suggests separation distance for the coexistence. Thus, MCL (Minimum Coupling Loss) and MC (Monte Carlo) methods were used to set up interference scenarios for the interference analysis and compute the separation distance between two systems according to the same frequency band and frequency separation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.6
• /
• pp.469-476
• /
• 2021

An electronic attack (EA) system is an essential weapon system for performing electronic warfare missions that contain signal tracking and jamming against multiple threats using electromagnetic waves, such as air defense radars, wireless command and communication networks, and guided missiles. The combat effectiveness can be maximized, and the survivability of militarily protecting combat power can be enhanced through EA mission operations, such as disabling the functions of multiple threats. The EA system can be used as a radio frequency jamming system to respond to drone attacks on the core infrastructure, such as airports, power plants, and communication broadcasting systems, in the civilian field. This study examined the criteria for classification according to the electronic attack missions of foreign EA systems based on an aviation platform. The foreign R&D trends by those criteria were investigated. Moreover, by analyzing the R&D trends of domestic EA systems and future battlefields in the domestic security environments, this paper proposes technological development plans of EA systems suitable for the future battlefield environments compared to the foreign R&D trends.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1193-1203
• /
• 2008

An active antenna(AA) can have wider bandwidth and more gain with small antenna size than those of passive antennas. However, AA inherently generates thermal noise and spurious signals from an active device. Moreover, the spurious performance of AA is very important in a highly sensitive receiving system since it is located at the front end of the receiving system. In this study, we developed an AA with $100{\sim}500\;MHz$, having the output P1dB higher than 3 dBm and little spurious signals in real environments. To achieve such performance, we designed an AA with 3-stage amplifier using CD(common drain) FET and 2 BJTs. Its electrical performances were simulated using ADS. The measurement results for typical gain, NF, OIP3, VSWR and P1dB in the required frequency band were 9.7 dBi, 10 dB, 14 dBm, 1.7:1 and 3 dBm respectively. They are in good agreement with simulation results. The unwanted spectrum level of the proposed AA is $10{\sim}30\;dB$ lower than that of the antenna with CS(common source) FET configuration at a west suburban area of Seoul, which shows that the proposed AA can be applicable to a highly sensitive receiving system for detecting unknown weak signals mixed with broadcasting and civilian communication signals.