• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권12호
• /
• pp.620-625
• /
• 2004

In this paper, we studied the emissive electric field due to the communication signal and the noise in medium voltage power-line. There are many types of conductive noise in power-line channel, which gives rise to radiation. And if the DMT carrier signal was excited, the current by this term was added to the current by noise and, generate radiation. We calculated input impedance by means of signal input network model of medium voltage power-line channel for calculating these currents. We calculated currents by input impedance and, calculated the emissive electric field by this calculated currents. From the measurement results, we knew that the measured results are very similar to the calculated results and if the input signal power level was higher than -40 dBm, the emissive electric field exceeds FCC radiation limit level 69.5 dB$\mu$V/m.

• 대한방사선치료학회지
• /
• 제13권1호
• /
• pp.38-46
• /
• 2001

Purpose : The aim of this study is to investigate the effect of tissue inhomogeneities when appling to contrast medium among Homogeneous, Batho and ETAR dose calculation method in RTP system. Method and Material : We made customized heterogeneous phantom it filled with water or contrast medium slab. Phantom scan data have taken PQ 5000 (CT scanner, Marconi, USA) and then dose was calculated in 3D RTP (AcQ-Plan, Marconi, USA) depends on dose calculation algorithm (Homogeneous, Batho, ETAR). The dose comparisons were described in terms of 2D isodose distribution, percent depth dose data, effective path length and monitor unit. Also dose distributions were calculated with homogeneous and inhomogeneous correction algorithm, Batho and ETAR, in each patients with different clinical sites. Results : Result indicated that Batho and ETAR method gave rise to percent depth dose deviation $1.5{\sim}2.7\%,\;2.3{\sim}3.5\%$ (6MV, field size $10{\times}10cm^2$) in each status with and without contrast medium. Also show that effective path lengths were more increase in contrast status (23.14 cm) than Non-contrast (22.07 cm) about $4.9\%$ or 10.7 mm (In case Hounsfield Unit 270) and these results were similary showned in each patient with different clinical site that was lung. prostate, liver and brain region. Concliusion : In conclusion we shown that the use of inhomogeneity correction algorithm for dose calculation in status of injected contrast medium can not represent exact dose at GTV region. These results mean that patients will be more irradiated photon beam during radiation therapy.

• 태양에너지
• /
• 제18권1호
• /
• pp.81-89
• /
• 1998

In this paper an experimental was done to design combustion chambers which is required radiation strength of high temperature generator of absorption rigerator. Partiqularly, in combustion chamber radiative mediums were set and basic experiments were done according to its size by radiation strength and effects of heat transfer promotion. The results are as follows : 1) When radiative mediums were set in small combustion furnace burning nonframely radiative heat transfer was effected. 2) In case that area ratio($A/A_o$) of radiative medium is 0.82 or over, temperature fluctuation effects of furnace inside were not nearly. 3) In experimental boundary heat transfer effects were 1.8 times by setting up radiative medium. Specially, $q/{\Delta}T$ values of furnace inside were uniformed nearly by setting up radiative mediums.

• 방사선산업학회지
• /
• 제7권2_3호
• /
• pp.135-139
• /
• 2013

Recently, chronic gamma radiation exposure on biological effects in middle dose-rates have become a serious concern. We investigated the biological effects of middle dose chronic exposure to gamma ray. Fifty male 6-week-old specific free Balb/c mice were randomly divided into five groups (four groups irradiated and one non-irradiated control group). Gamma radiation exposed in Gamma phytotron on Advanced Radiation Technology Institute (Jeongeup, Korea). Irradiation was carried out for 1 or 2 weeks using gamma rays at dose rates of 45 and $50mGy\;h^{-1}$ with total doses 7.56 Gy ($45mGy\;h^{-1}$, 1 week), 8.4 Gy ($50mGy\;h^{-1}$, 1 week), 15.12 Gy ($45mGy\;h^{-1}$, 2 weeks) and 16.8 Gy ($50mGy\;h^{-1}$, 2 weeks). After irradiation, immediately we sacrificed and counted body and organ weights. Moreover we counted spleen cell numbers. Compared with control non-irradiated group, all irradiated groups of body and spleen weights showed significant decreased. However, no significant alteration was observed between same irradiated period groups. In spleen cell numbers, reduced compared to the control group. However, significant alteration was observed between same irradiated period groups ($45mGy\;h^{-1}$, $50mGy\;h^{-1}$). These results demonstrated biological effects according to the radiation dose rate and irradiated period.

• The Journal of the Acoustical Society of Korea
• /
• 제20권2E호
• /
• pp.46-50
• /
• 2001

The characteristics of radiation impedance are analyzed by algorithms which consists of Finite Element Method (FEM) and Hybrid type Infinite Element Method. The changes of radiation impedance for piston source according to the size and the material properties of baffles are studied. The results of the radiation impedance for rigid finite baffle coincide with other reports. The more the material properties of baffle that comes across the acoustic medium, the more the calculation results of radiation impedance approach the ones without baffle. Therefore, these results can be applied to the design and the radiation characteristics analysis of acoustic transducers.

• 대한기계학회논문집B
• /
• 제22권12호
• /
• pp.1796-1804
• /
• 1998

A numerical investigation has been performed to discuss the radiation-affected steady-laminar natural convection induced by a hot inner cylinder under a large temperature difference in the annuli filled with a gray gas. To examine the effects of thermal radiation on thermo-fluid dynamic behaviors in the eccentric geometry, the generalized body-fitted coordinate system is introduced while the finite volume method (FVM) is used for solving the radiative transport equation. After validating the numerical results for the case without radiation, the detailed radiation effect has been discussed. Based on the results of this study, when there exists a large temperature difference between two cylinders, the existence of radiatively participating medium is found to incur a distinct difference in fluid dynamic as well as thermal behavior.

• KSBB Journal
• /
• 제24권3호
• /
• pp.321-326
• /
• 2009

Paracoccus sp.의 astaxanthin 생산성 증가를 위해 반응표면 분석법을 사용하여 최적의 배지조성을 설계하였다. Paracoccus의 성장 배지인 Marine Broth와 modified Blaszczyk 배지를 사용하여 astaxanthin 생산성을 측정한 결과 각각 0.39 mg/L, 0.40 mg/L의 astaxanthin 농도를 보였다. Modified Blaszczyk 배지의 조성을 각각 변수로 두어 가장 많은 영향을 주는 성분을 알아본 결과 $MgSO_4$와 yeast extract로 확인되었다. 중심합성계획법에 따라 $MgSO_4$ ($0.397{\sim}4.621$ g/L), yeast extract ($2.879{\sim}7.121$ g/L)를 달리하였을 때, astaxanthin 생상성에 대한 회귀식의 $R^2$은 0.894로 나타났고, 이에 따른 최대 생산량에 0.925 mg/L로 예상되었으며 이때의 $MgSO_4$와 yeast extract의 농도는 각각 2.83과 7.02 g/L로 나타났다. 이에 대한 확인실험 결과 2.83 $MgSO_4$ g/L, 7.02 yeast extract g/L에서 1.021 mg/L의 astaxanthin이 생산되었으며, 배지의 최적화에 따라 250% 이상의 생산성 증가가 확인되어졌다.

• 식물조직배양학회지
• /
• 제28권6호
• /
• pp.305-310
• /
• 2001

본 실험은 지치 (Lithospermum erythrorhizon)의 뿌리조직으로부터 유도한 캘러스에 ${\gamma}$선을 조사하여 배양기간과 배지조성 및 명.암배양의 조건에 따라 ${\gamma}$선 조사가 캘러스 생장촉진 효과가 있는지를 검토하고자 수행하였다. 지치의 캘러스 생장은 전체적으로 암배양에서보다 명배양에서 효과적이었다. r선 조사에 의한 효과에 있어서는 LLB2N2배지의 8 Gy에서 캘러스의 생장에 효과가 가장 좋았고, LLK2I0.2배지에서는 16 Gy에서 캘러스 생장효과가 좋았지만 암배양에서의 ${\gamma}$선처리 효과는 없었다. 명배양에서 LS배지에 BA 1 mg/L와 NAA 1 mg/L를 첨가할 경우, BA 2mg/L와 NAA 2 mg/L를 첨가할 때보다 캘러스의 생장효과가 있었으나, 암배양에서는 차이가 없었다. 특정선량에 대한 BA와 NAA의 농도에 있어서는 각각 2 mg/L가 효과적인 것으로 나타났다. MK2I0.2배지는 0.5 Gy와 1 Gy에서 캘러스의 생장에 효과적이었으나, 기본배지의 종류에 있어서는 MS배지보다 LS배지에서 더 효과적이었다. M-9배지에서는 명배양에서도 캘러스의 생장은 저조하였으나, 16 Gy 및 30 Gy에서 캘러스의 생장이 30%이상 증가하였다. 암배양에서는 ${\gamma}$선 조사에 의한 캘러스의 생장효과는 거의 없었다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 춘계학술대회 논문집
• /
• pp.658-663
• /
• 2004

The interaction between a vibrating structure and a surrounding acoustic medium determines the acoustic power propagating into the far-field. A straightforward method to reduce the radiated power is to reduce the vibration of the structure. However it is more efficient to control the modes of the structure separately since each vibration mode of the structure has different radiation efficiency. An efficient method to reduce the sound radiation in the low frequency region is proposed by reducing the radiation efficiency of the structure.

• Current Optics and Photonics
• /
• 제2권5호
• /
• pp.482-487
• /
• 2018

We investigate the radiation characteristics of radially polarized light and azimuthally polarized light through plasmonic subwavelength-scale annular slit (PSAS) structures, by means of both theoretical and numerical methods. Effective-medium theory was utilized to analyze the characteristics of PSAS structures, and the corresponding results showed that PSAS structures can function as a metallic medium for azimuthally polarized light, or as a low-loss dielectric medium for radially polarized light. Numerical calculations based on the finite-element method were also performed, to verify the theoretical analyses. It turned out that the numerical results supported the theoretical results. Moreover, we exploited the PSAS structures in novel nanophotonic elements with dual functionalities that could selectively focus or pass/block incident light, depending on its polarization state. For example, if PSAS structures were implemented in the dielectric region of a metallic Fresnel zone plate, the modified zone plate could function as a blocking element to azimuthally polarized light, yet as a focusing element to radially polarized light. On the contrary, if PSAS structures were implemented in the metallic region of a metallic Fresnel zone plate (i.e. the inverted form of the former), it could function as a focusing element to azimuthally polarized light, yet as a simple transparent element to radially polarized light.